GymCrateWeights

Ultra

by Prime AirGhost · 9/20/2026

Lua Script

Paste this script into the Command Bar to spawn the model

1	-- Generated with StudForge.org \| AI-powered 3D models for Roblox
2	-- Model: GymCrateWeights
3
4	local MS = game:GetService("MaterialService")
5
6	local ok, roots = pcall(game.GetObjects, game, "rbxassetid://13386676607")
7	if not ok then return warn(roots) end
8
9	local tmp = Instance.new("Folder")
10	for _, r in ipairs(roots) do r.Parent = tmp end
11
12	for _, d in ipairs(tmp:GetDescendants()) do
13	if d:IsA("MaterialVariant") then
14	d.Parent = MS
15	end
16	end
17	tmp:Destroy()
18
19	local model = Instance.new("Model")
20	model.Name = "GymCrateWeights"
21	model.Parent = workspace
22
23	local variants = {
24	["Dark stone grey"] = "2022 Stud",
25	["Ghost grey"] = "2022 Stud",
26	["Medium stone grey"] = "2022 Inlet",
27	["Nougat"] = "2022 Stud",
28	["Pine Cone"] = "2022 Small Stud",
29	["Reddish brown"] = "2022 Small Stud",
30	["Silver"] = "2022 Stud",
31	["Storm blue"] = "2022 Stud",
32	}
33	do
34	local p = Instance.new("Part")
35	p.Name = "Floor"
36	p.Size = Vector3.new(36, 0.5, 36)
37	p.CFrame = CFrame.new(0, 0.25, 0)
38	p.BrickColor = BrickColor.new("Dark stone grey")
39	p.Material = Enum.Material.Glacier
40	p.MaterialVariant = "2022 Stud"
41	p.Anchored = true
42	p.Parent = model
43	end
44	do
45	local p = Instance.new("Part")
46	p.Name = "BorderN"
47	p.Size = Vector3.new(36, 0.2, 0.5)
48	p.CFrame = CFrame.new(0.04, 0.5, -17.79)
49	p.BrickColor = BrickColor.new("Medium stone grey")
50	p.Material = Enum.Material.Glacier
51	p.MaterialVariant = "2022 Inlet"
52	p.Anchored = true
53	p.Parent = model
54	end
55	do
56	local p = Instance.new("Part")
57	p.Name = "BorderS"
58	p.Size = Vector3.new(36, 0.2, 0.5)
59	p.CFrame = CFrame.new(0.04, 0.5, 17.79)
60	p.BrickColor = BrickColor.new("Medium stone grey")
61	p.Material = Enum.Material.Glacier
62	p.MaterialVariant = "2022 Inlet"
63	p.Anchored = true
64	p.Parent = model
65	end
66	do
67	local p = Instance.new("Part")
68	p.Name = "BorderE"
69	p.Size = Vector3.new(0.5, 0.2, 35)
70	p.CFrame = CFrame.new(17.79, 0.54, 0)
71	p.BrickColor = BrickColor.new("Medium stone grey")
72	p.Material = Enum.Material.Glacier
73	p.MaterialVariant = "2022 Inlet"
74	p.Anchored = true
75	p.Parent = model
76	end
77	do
78	local p = Instance.new("Part")
79	p.Name = "BorderW"
80	p.Size = Vector3.new(0.5, 0.2, 35)
81	p.CFrame = CFrame.new(-17.79, 0.54, 0)
82	p.BrickColor = BrickColor.new("Medium stone grey")
83	p.Material = Enum.Material.Glacier
84	p.MaterialVariant = "2022 Inlet"
85	p.Anchored = true
86	p.Parent = model
87	end
88	do
89	local p = Instance.new("Part")
90	p.Name = "GridX_-16"
91	p.Size = Vector3.new(0.1, 0.02, 35)
92	p.CFrame = CFrame.new(-16, 0.55, 0)
93	p.BrickColor = BrickColor.new("Ghost grey")
94	p.Material = Enum.Material.Glacier
95	p.MaterialVariant = "2022 Stud"
96	p.Anchored = true
97	p.Parent = model
98	end
99	do
100	local p = Instance.new("Part")
101	p.Name = "GridZ_-16"
102	p.Size = Vector3.new(35, 0.02, 0.1)
103	p.CFrame = CFrame.new(0, 0.55, -16)
104	p.BrickColor = BrickColor.new("Ghost grey")
105	p.Material = Enum.Material.Glacier
106	p.MaterialVariant = "2022 Stud"
107	p.Anchored = true
108	p.Parent = model
109	end
110	do
111	local p = Instance.new("Part")
112	p.Name = "GridX_-8"
113	p.Size = Vector3.new(0.1, 0.02, 35)
114	p.CFrame = CFrame.new(-8, 0.55, 0)
115	p.BrickColor = BrickColor.new("Ghost grey")
116	p.Material = Enum.Material.Glacier
117	p.MaterialVariant = "2022 Stud"
118	p.Anchored = true
119	p.Parent = model
120	end
121	do
122	local p = Instance.new("Part")
123	p.Name = "GridZ_-8"
124	p.Size = Vector3.new(35, 0.02, 0.1)
125	p.CFrame = CFrame.new(0, 0.55, -8)
126	p.BrickColor = BrickColor.new("Ghost grey")
127	p.Material = Enum.Material.Glacier
128	p.MaterialVariant = "2022 Stud"
129	p.Anchored = true
130	p.Parent = model
131	end
132	do
133	local p = Instance.new("Part")
134	p.Name = "GridX_0"
135	p.Size = Vector3.new(0.1, 0.02, 35)
136	p.CFrame = CFrame.new(0, 0.55, 0)
137	p.BrickColor = BrickColor.new("Ghost grey")
138	p.Material = Enum.Material.Glacier
139	p.MaterialVariant = "2022 Stud"
140	p.Anchored = true
141	p.Parent = model
142	end
143	do
144	local p = Instance.new("Part")
145	p.Name = "GridZ_0"
146	p.Size = Vector3.new(35, 0.02, 0.1)
147	p.CFrame = CFrame.new(0, 0.55, 0)
148	p.BrickColor = BrickColor.new("Ghost grey")
149	p.Material = Enum.Material.Glacier
150	p.MaterialVariant = "2022 Stud"
151	p.Anchored = true
152	p.Parent = model
153	end
154	do
155	local p = Instance.new("Part")
156	p.Name = "GridX_8"
157	p.Size = Vector3.new(0.1, 0.02, 35)
158	p.CFrame = CFrame.new(8, 0.55, 0)
159	p.BrickColor = BrickColor.new("Ghost grey")
160	p.Material = Enum.Material.Glacier
161	p.MaterialVariant = "2022 Stud"
162	p.Anchored = true
163	p.Parent = model
164	end
165	do
166	local p = Instance.new("Part")
167	p.Name = "GridZ_8"
168	p.Size = Vector3.new(35, 0.02, 0.1)
169	p.CFrame = CFrame.new(0, 0.55, 8)
170	p.BrickColor = BrickColor.new("Ghost grey")
171	p.Material = Enum.Material.Glacier
172	p.MaterialVariant = "2022 Stud"
173	p.Anchored = true
174	p.Parent = model
175	end
176	do
177	local p = Instance.new("Part")
178	p.Name = "GridX_16"
179	p.Size = Vector3.new(0.1, 0.02, 35)
180	p.CFrame = CFrame.new(16, 0.55, 0)
181	p.BrickColor = BrickColor.new("Ghost grey")
182	p.Material = Enum.Material.Glacier
183	p.MaterialVariant = "2022 Stud"
184	p.Anchored = true
185	p.Parent = model
186	end
187	do
188	local p = Instance.new("Part")
189	p.Name = "GridZ_16"
190	p.Size = Vector3.new(35, 0.02, 0.1)
191	p.CFrame = CFrame.new(0, 0.55, 16)
192	p.BrickColor = BrickColor.new("Ghost grey")
193	p.Material = Enum.Material.Glacier
194	p.MaterialVariant = "2022 Stud"
195	p.Anchored = true
196	p.Parent = model
197	end
198	do
199	local p = Instance.new("Part")
200	p.Name = "SR_BaseL"
201	p.Size = Vector3.new(4, 0.4, 0.8)
202	p.CFrame = CFrame.new(-8, 0.78, 1)
203	p.BrickColor = BrickColor.new("Medium stone grey")
204	p.Material = Enum.Material.Glacier
205	p.MaterialVariant = "2022 Inlet"
206	p.Anchored = true
207	p.Parent = model
208	end
209	do
210	local p = Instance.new("Part")
211	p.Name = "SR_BaseR"
212	p.Size = Vector3.new(4, 0.4, 0.8)
213	p.CFrame = CFrame.new(-8, 0.78, 7)
214	p.BrickColor = BrickColor.new("Medium stone grey")
215	p.Material = Enum.Material.Glacier
216	p.MaterialVariant = "2022 Inlet"
217	p.Anchored = true
218	p.Parent = model
219	end
220	do
221	local p = Instance.new("Part")
222	p.Name = "SR_PostL"
223	p.Size = Vector3.new(0.6, 5, 0.6)
224	p.CFrame = CFrame.new(-8, 3.4, 1)
225	p.BrickColor = BrickColor.new("Medium stone grey")
226	p.Material = Enum.Material.Glacier
227	p.MaterialVariant = "2022 Inlet"
228	p.Anchored = true
229	p.Parent = model
230	end
231	do
232	local p = Instance.new("Part")
233	p.Name = "SR_PostR"
234	p.Size = Vector3.new(0.6, 5, 0.6)
235	p.CFrame = CFrame.new(-8, 3.4, 7)
236	p.BrickColor = BrickColor.new("Medium stone grey")
237	p.Material = Enum.Material.Glacier
238	p.MaterialVariant = "2022 Inlet"
239	p.Anchored = true
240	p.Parent = model
241	end
242	do
243	local p = Instance.new("Part")
244	p.Name = "SR_CatchL"
245	p.Size = Vector3.new(0.8, 0.4, 0.4)
246	p.CFrame = CFrame.new(-7.6, 5.6, 1)
247	p.BrickColor = BrickColor.new("Dark stone grey")
248	p.Material = Enum.Material.Glacier
249	p.MaterialVariant = "2022 Stud"
250	p.Anchored = true
251	p.Parent = model
252	end
253	do
254	local p = Instance.new("Part")
255	p.Name = "SR_CatchR"
256	p.Size = Vector3.new(0.8, 0.4, 0.4)
257	p.CFrame = CFrame.new(-7.6, 5.6, 7)
258	p.BrickColor = BrickColor.new("Dark stone grey")
259	p.Material = Enum.Material.Glacier
260	p.MaterialVariant = "2022 Stud"
261	p.Anchored = true
262	p.Parent = model
263	end
264	do
265	local p = Instance.new("Part")
266	p.Shape = Enum.PartType.Cylinder
267	p.Name = "SR_Bar"
268	p.Size = Vector3.new(12, 0.25, 0.25)
269	p.CFrame = CFrame.new(-7.6, 5.8, 4) * CFrame.Angles(math.rad(0), math.rad(90), math.rad(0))
270	p.BrickColor = BrickColor.new("Silver")
271	p.Material = Enum.Material.Glacier
272	p.MaterialVariant = "2022 Stud"
273	p.Anchored = true
274	p.Parent = model
275	end
276	do
277	local p = Instance.new("Part")
278	p.Shape = Enum.PartType.Cylinder
279	p.Name = "SR_Col_L_In"
280	p.Size = Vector3.new(0.2, 0.4, 0.4)
281	p.CFrame = CFrame.new(-7.6, 5.8, 1.94) * CFrame.Angles(math.rad(0), math.rad(90), math.rad(0))
282	p.BrickColor = BrickColor.new("Dark stone grey")
283	p.Material = Enum.Material.Glacier
284	p.MaterialVariant = "2022 Stud"
285	p.Anchored = true
286	p.Parent = model
287	end
288	do
289	local p = Instance.new("Part")
290	p.Shape = Enum.PartType.Cylinder
291	p.Name = "SR_Col_R_In"
292	p.Size = Vector3.new(0.2, 0.4, 0.4)
293	p.CFrame = CFrame.new(-7.6, 5.8, 6.06) * CFrame.Angles(math.rad(0), math.rad(90), math.rad(0))
294	p.BrickColor = BrickColor.new("Dark stone grey")
295	p.Material = Enum.Material.Glacier
296	p.MaterialVariant = "2022 Stud"
297	p.Anchored = true
298	p.Parent = model
299	end
300	do
301	local p = Instance.new("Part")
302	p.Shape = Enum.PartType.Cylinder
303	p.Name = "SR_Col_L_Out"
304	p.Size = Vector3.new(0.2, 0.3, 0.3)
305	p.CFrame = CFrame.new(-7.6, 5.8, -1.94) * CFrame.Angles(math.rad(0), math.rad(90), math.rad(0))
306	p.BrickColor = BrickColor.new("Dark stone grey")
307	p.Material = Enum.Material.Glacier
308	p.MaterialVariant = "2022 Stud"
309	p.Anchored = true
310	p.Parent = model
311	end
312	do
313	local p = Instance.new("Part")
314	p.Shape = Enum.PartType.Cylinder
315	p.Name = "SR_Col_R_Out"
316	p.Size = Vector3.new(0.2, 0.3, 0.3)
317	p.CFrame = CFrame.new(-7.6, 5.8, 9.94) * CFrame.Angles(math.rad(0), math.rad(90), math.rad(0))
318	p.BrickColor = BrickColor.new("Dark stone grey")
319	p.Material = Enum.Material.Glacier
320	p.MaterialVariant = "2022 Stud"
321	p.Anchored = true
322	p.Parent = model
323	end
324	do
325	local p = Instance.new("Part")
326	p.Name = "SquatCrate1_Body"
327	p.Size = Vector3.new(3.6, 3.6, 3.6)
328	p.CFrame = CFrame.new(-7.6, 5.8, 0)
329	p.BrickColor = BrickColor.new("Reddish brown")
330	p.Material = Enum.Material.Glacier
331	p.MaterialVariant = "2022 Small Stud"
332	p.Anchored = true
333	p.Parent = model
334	end
335	do
336	local p = Instance.new("Part")
337	p.Name = "SquatCrate1_X1_pos"
338	p.Size = Vector3.new(4.80833, 0.144, 0.144)
339	p.CFrame = CFrame.new(-5.75, 5.8, 0) * CFrame.Angles(math.rad(-45), math.rad(-90), math.rad(0))
340	p.BrickColor = BrickColor.new("Pine Cone")
341	p.Material = Enum.Material.Glacier
342	p.MaterialVariant = "2022 Small Stud"
343	p.Anchored = true
344	p.Parent = model
345	end
346	do
347	local p = Instance.new("Part")
348	p.Name = "SquatCrate1_X2_pos"
349	p.Size = Vector3.new(4.80833, 0.144, 0.144)
350	p.CFrame = CFrame.new(-5.79, 5.8, 0) * CFrame.Angles(math.rad(45), math.rad(-90), math.rad(0))
351	p.BrickColor = BrickColor.new("Pine Cone")
352	p.Material = Enum.Material.Glacier
353	p.MaterialVariant = "2022 Small Stud"
354	p.Anchored = true
355	p.Parent = model
356	end
357	do
358	local p = Instance.new("Part")
359	p.Name = "SquatCrate1_X1_neg"
360	p.Size = Vector3.new(4.80833, 0.144, 0.144)
361	p.CFrame = CFrame.new(-9.37, 5.8, 0) * CFrame.Angles(math.rad(-45), math.rad(-90), math.rad(0))
362	p.BrickColor = BrickColor.new("Pine Cone")
363	p.Material = Enum.Material.Glacier
364	p.MaterialVariant = "2022 Small Stud"
365	p.Anchored = true
366	p.Parent = model
367	end
368	do
369	local p = Instance.new("Part")
370	p.Name = "SquatCrate1_X2_neg"
371	p.Size = Vector3.new(4.80833, 0.144, 0.144)
372	p.CFrame = CFrame.new(-9.41, 5.8, 0) * CFrame.Angles(math.rad(45), math.rad(-90), math.rad(0))
373	p.BrickColor = BrickColor.new("Pine Cone")
374	p.Material = Enum.Material.Glacier
375	p.MaterialVariant = "2022 Small Stud"
376	p.Anchored = true
377	p.Parent = model
378	end
379	do
380	local p = Instance.new("Part")
381	p.Name = "SquatCrate2_Body"
382	p.Size = Vector3.new(3.6, 3.6, 3.6)
383	p.CFrame = CFrame.new(-7.6, 5.8, 8)
384	p.BrickColor = BrickColor.new("Reddish brown")
385	p.Material = Enum.Material.Glacier
386	p.MaterialVariant = "2022 Small Stud"
387	p.Anchored = true
388	p.Parent = model
389	end
390	do
391	local p = Instance.new("Part")
392	p.Name = "SquatCrate2_X1_pos"
393	p.Size = Vector3.new(4.80833, 0.144, 0.144)
394	p.CFrame = CFrame.new(-5.75, 5.8, 8) * CFrame.Angles(math.rad(-45), math.rad(-90), math.rad(0))
395	p.BrickColor = BrickColor.new("Pine Cone")
396	p.Material = Enum.Material.Glacier
397	p.MaterialVariant = "2022 Small Stud"
398	p.Anchored = true
399	p.Parent = model
400	end
401	do
402	local p = Instance.new("Part")
403	p.Name = "SquatCrate2_X2_pos"
404	p.Size = Vector3.new(4.80833, 0.144, 0.144)
405	p.CFrame = CFrame.new(-5.79, 5.8, 8) * CFrame.Angles(math.rad(45), math.rad(-90), math.rad(0))
406	p.BrickColor = BrickColor.new("Pine Cone")
407	p.Material = Enum.Material.Glacier
408	p.MaterialVariant = "2022 Small Stud"
409	p.Anchored = true
410	p.Parent = model
411	end
412	do
413	local p = Instance.new("Part")
414	p.Name = "SquatCrate2_X1_neg"
415	p.Size = Vector3.new(4.80833, 0.144, 0.144)
416	p.CFrame = CFrame.new(-9.37, 5.8, 8) * CFrame.Angles(math.rad(-45), math.rad(-90), math.rad(0))
417	p.BrickColor = BrickColor.new("Pine Cone")
418	p.Material = Enum.Material.Glacier
419	p.MaterialVariant = "2022 Small Stud"
420	p.Anchored = true
421	p.Parent = model
422	end
423	do
424	local p = Instance.new("Part")
425	p.Name = "SquatCrate2_X2_neg"
426	p.Size = Vector3.new(4.80833, 0.144, 0.144)
427	p.CFrame = CFrame.new(-9.41, 5.8, 8) * CFrame.Angles(math.rad(45), math.rad(-90), math.rad(0))
428	p.BrickColor = BrickColor.new("Pine Cone")
429	p.Material = Enum.Material.Glacier
430	p.MaterialVariant = "2022 Small Stud"
431	p.Anchored = true
432	p.Parent = model
433	end
434	do
435	local p = Instance.new("Part")
436	p.Name = "BP_RearBase"
437	p.Size = Vector3.new(0.6, 0.3, 4)
438	p.CFrame = CFrame.new(6, 0.74, 4)
439	p.BrickColor = BrickColor.new("Medium stone grey")
440	p.Material = Enum.Material.Glacier
441	p.MaterialVariant = "2022 Inlet"
442	p.Anchored = true
443	p.Parent = model
444	end
445	do
446	local p = Instance.new("Part")
447	p.Name = "BP_Spine"
448	p.Size = Vector3.new(6, 0.3, 0.6)
449	p.CFrame = CFrame.new(9, 0.7, 4)
450	p.BrickColor = BrickColor.new("Medium stone grey")
451	p.Material = Enum.Material.Glacier
452	p.MaterialVariant = "2022 Inlet"
453	p.Anchored = true
454	p.Parent = model
455	end
456	do
457	local p = Instance.new("Part")
458	p.Name = "BP_FrontLegV"
459	p.Size = Vector3.new(0.4, 1, 0.4)
460	p.CFrame = CFrame.new(11.54, 1.2, 4)
461	p.BrickColor = BrickColor.new("Medium stone grey")
462	p.Material = Enum.Material.Glacier
463	p.MaterialVariant = "2022 Inlet"
464	p.Anchored = true
465	p.Parent = model
466	end
467	do
468	local p = Instance.new("Part")
469	p.Name = "BP_FrontLegH"
470	p.Size = Vector3.new(0.4, 0.3, 3)
471	p.CFrame = CFrame.new(11.5, 0.74, 4)
472	p.BrickColor = BrickColor.new("Medium stone grey")
473	p.Material = Enum.Material.Glacier
474	p.MaterialVariant = "2022 Inlet"
475	p.Anchored = true
476	p.Parent = model
477	end
478	do
479	local p = Instance.new("Part")
480	p.Name = "BP_PostL"
481	p.Size = Vector3.new(0.4, 3.6, 0.4)
482	p.CFrame = CFrame.new(6, 2.5, 2.5)
483	p.BrickColor = BrickColor.new("Medium stone grey")
484	p.Material = Enum.Material.Glacier
485	p.MaterialVariant = "2022 Inlet"
486	p.Anchored = true
487	p.Parent = model
488	end
489	do
490	local p = Instance.new("Part")
491	p.Name = "BP_PostR"
492	p.Size = Vector3.new(0.4, 3.6, 0.4)
493	p.CFrame = CFrame.new(6, 2.5, 5.5)
494	p.BrickColor = BrickColor.new("Medium stone grey")
495	p.Material = Enum.Material.Glacier
496	p.MaterialVariant = "2022 Inlet"
497	p.Anchored = true
498	p.Parent = model
499	end
500	do
501	local p = Instance.new("Part")
502	p.Name = "BP_CatchL"
503	p.Size = Vector3.new(0.6, 0.3, 0.3)
504	p.CFrame = CFrame.new(6.2, 4.3, 2.5)
505	p.BrickColor = BrickColor.new("Dark stone grey")
506	p.Material = Enum.Material.Glacier
507	p.MaterialVariant = "2022 Stud"
508	p.Anchored = true
509	p.Parent = model
510	end
511	do
512	local p = Instance.new("Part")
513	p.Name = "BP_CatchR"
514	p.Size = Vector3.new(0.6, 0.3, 0.3)
515	p.CFrame = CFrame.new(6.2, 4.3, 5.5)
516	p.BrickColor = BrickColor.new("Dark stone grey")
517	p.Material = Enum.Material.Glacier
518	p.MaterialVariant = "2022 Stud"
519	p.Anchored = true
520	p.Parent = model
521	end
522	do
523	local p = Instance.new("Part")
524	p.Name = "BP_PadSupport"
525	p.Size = Vector3.new(5.8, 0.2, 1.2)
526	p.CFrame = CFrame.new(9, 1.86, 4)
527	p.BrickColor = BrickColor.new("Dark stone grey")
528	p.Material = Enum.Material.Glacier
529	p.MaterialVariant = "2022 Stud"
530	p.Anchored = true
531	p.Parent = model
532	end
533	do
534	local p = Instance.new("Part")
535	p.Name = "BP_Pad"
536	p.Size = Vector3.new(6, 0.4, 1.6)
537	p.CFrame = CFrame.new(9, 2.2, 4)
538	p.BrickColor = BrickColor.new("Storm blue")
539	p.Material = Enum.Material.Glacier
540	p.MaterialVariant = "2022 Stud"
541	p.Anchored = true
542	p.Parent = model
543	end
544	do
545	local p = Instance.new("Part")
546	p.Shape = Enum.PartType.Cylinder
547	p.Name = "BP_Bar"
548	p.Size = Vector3.new(8, 0.2, 0.2)
549	p.CFrame = CFrame.new(6.2, 4.5, 4.04) * CFrame.Angles(math.rad(0), math.rad(90), math.rad(0))
550	p.BrickColor = BrickColor.new("Silver")
551	p.Material = Enum.Material.Glacier
552	p.MaterialVariant = "2022 Stud"
553	p.Anchored = true
554	p.Parent = model
555	end
556	do
557	local p = Instance.new("Part")
558	p.Shape = Enum.PartType.Cylinder
559	p.Name = "BP_Col_L_In"
560	p.Size = Vector3.new(0.2, 0.3, 0.3)
561	p.CFrame = CFrame.new(6.2, 4.5, 2.14) * CFrame.Angles(math.rad(0), math.rad(90), math.rad(0))
562	p.BrickColor = BrickColor.new("Dark stone grey")
563	p.Material = Enum.Material.Glacier
564	p.MaterialVariant = "2022 Stud"
565	p.Anchored = true
566	p.Parent = model
567	end
568	do
569	local p = Instance.new("Part")
570	p.Shape = Enum.PartType.Cylinder
571	p.Name = "BP_Col_R_In"
572	p.Size = Vector3.new(0.2, 0.3, 0.3)
573	p.CFrame = CFrame.new(6.2, 4.5, 5.86) * CFrame.Angles(math.rad(0), math.rad(90), math.rad(0))
574	p.BrickColor = BrickColor.new("Dark stone grey")
575	p.Material = Enum.Material.Glacier
576	p.MaterialVariant = "2022 Stud"
577	p.Anchored = true
578	p.Parent = model
579	end
580	do
581	local p = Instance.new("Part")
582	p.Shape = Enum.PartType.Cylinder
583	p.Name = "BP_Col_L_Out"
584	p.Size = Vector3.new(0.2, 0.25, 0.25)
585	p.CFrame = CFrame.new(6.2, 4.5, -0.14) * CFrame.Angles(math.rad(0), math.rad(90), math.rad(0))
586	p.BrickColor = BrickColor.new("Dark stone grey")
587	p.Material = Enum.Material.Glacier
588	p.MaterialVariant = "2022 Stud"
589	p.Anchored = true
590	p.Parent = model
591	end
592	do
593	local p = Instance.new("Part")
594	p.Shape = Enum.PartType.Cylinder
595	p.Name = "BP_Col_R_Out"
596	p.Size = Vector3.new(0.2, 0.25, 0.25)
597	p.CFrame = CFrame.new(6.2, 4.5, 8.18) * CFrame.Angles(math.rad(0), math.rad(90), math.rad(0))
598	p.BrickColor = BrickColor.new("Dark stone grey")
599	p.Material = Enum.Material.Glacier
600	p.MaterialVariant = "2022 Stud"
601	p.Anchored = true
602	p.Parent = model
603	end
604	do
605	local p = Instance.new("Part")
606	p.Name = "BenchCrate1_Body"
607	p.Size = Vector3.new(2, 2, 2)
608	p.CFrame = CFrame.new(6.2, 4.5, 1)
609	p.BrickColor = BrickColor.new("Reddish brown")
610	p.Material = Enum.Material.Glacier
611	p.MaterialVariant = "2022 Small Stud"
612	p.Anchored = true
613	p.Parent = model
614	end
615	do
616	local p = Instance.new("Part")
617	p.Name = "BenchCrate1_X1_pos"
618	p.Size = Vector3.new(2.54558, 0.08, 0.08)
619	p.CFrame = CFrame.new(7.33, 4.5, 1) * CFrame.Angles(math.rad(-45), math.rad(-90), math.rad(0))
620	p.BrickColor = BrickColor.new("Pine Cone")
621	p.Material = Enum.Material.Glacier
622	p.MaterialVariant = "2022 Small Stud"
623	p.Anchored = true
624	p.Parent = model
625	end
626	do
627	local p = Instance.new("Part")
628	p.Name = "BenchCrate1_X2_pos"
629	p.Size = Vector3.new(2.54558, 0.08, 0.08)
630	p.CFrame = CFrame.new(7.21, 4.5, 1) * CFrame.Angles(math.rad(45), math.rad(-90), math.rad(0))
631	p.BrickColor = BrickColor.new("Pine Cone")
632	p.Material = Enum.Material.Glacier
633	p.MaterialVariant = "2022 Small Stud"
634	p.Anchored = true
635	p.Parent = model
636	end
637	do
638	local p = Instance.new("Part")
639	p.Name = "BenchCrate1_X1_neg"
640	p.Size = Vector3.new(2.54558, 0.08, 0.08)
641	p.CFrame = CFrame.new(5.23, 4.5, 1) * CFrame.Angles(math.rad(-45), math.rad(-90), math.rad(0))
642	p.BrickColor = BrickColor.new("Pine Cone")
643	p.Material = Enum.Material.Glacier
644	p.MaterialVariant = "2022 Small Stud"
645	p.Anchored = true
646	p.Parent = model
647	end
648	do
649	local p = Instance.new("Part")
650	p.Name = "BenchCrate1_X2_neg"
651	p.Size = Vector3.new(2.54558, 0.08, 0.08)
652	p.CFrame = CFrame.new(5.19, 4.5, 1) * CFrame.Angles(math.rad(45), math.rad(-90), math.rad(0))
653	p.BrickColor = BrickColor.new("Pine Cone")
654	p.Material = Enum.Material.Glacier
655	p.MaterialVariant = "2022 Small Stud"
656	p.Anchored = true
657	p.Parent = model
658	end
659	do
660	local p = Instance.new("Part")
661	p.Name = "BenchCrate2_Body"
662	p.Size = Vector3.new(2, 2, 2)
663	p.CFrame = CFrame.new(6.2, 4.5, 7)
664	p.BrickColor = BrickColor.new("Reddish brown")
665	p.Material = Enum.Material.Glacier
666	p.MaterialVariant = "2022 Small Stud"
667	p.Anchored = true
668	p.Parent = model
669	end
670	do
671	local p = Instance.new("Part")
672	p.Name = "BenchCrate2_X1_pos"
673	p.Size = Vector3.new(2.54558, 0.08, 0.08)
674	p.CFrame = CFrame.new(7.33, 4.5, 7) * CFrame.Angles(math.rad(-45), math.rad(-90), math.rad(0))
675	p.BrickColor = BrickColor.new("Pine Cone")
676	p.Material = Enum.Material.Glacier
677	p.MaterialVariant = "2022 Small Stud"
678	p.Anchored = true
679	p.Parent = model
680	end
681	do
682	local p = Instance.new("Part")
683	p.Name = "BenchCrate2_X2_pos"
684	p.Size = Vector3.new(2.54558, 0.08, 0.08)
685	p.CFrame = CFrame.new(7.21, 4.5, 7) * CFrame.Angles(math.rad(45), math.rad(-90), math.rad(0))
686	p.BrickColor = BrickColor.new("Pine Cone")
687	p.Material = Enum.Material.Glacier
688	p.MaterialVariant = "2022 Small Stud"
689	p.Anchored = true
690	p.Parent = model
691	end
692	do
693	local p = Instance.new("Part")
694	p.Name = "BenchCrate2_X1_neg"
695	p.Size = Vector3.new(2.54558, 0.08, 0.08)
696	p.CFrame = CFrame.new(5.23, 4.5, 7) * CFrame.Angles(math.rad(-45), math.rad(-90), math.rad(0))
697	p.BrickColor = BrickColor.new("Pine Cone")
698	p.Material = Enum.Material.Glacier
699	p.MaterialVariant = "2022 Small Stud"
700	p.Anchored = true
701	p.Parent = model
702	end
703	do
704	local p = Instance.new("Part")
705	p.Name = "BenchCrate2_X2_neg"
706	p.Size = Vector3.new(2.54558, 0.08, 0.08)
707	p.CFrame = CFrame.new(5.19, 4.5, 7) * CFrame.Angles(math.rad(45), math.rad(-90), math.rad(0))
708	p.BrickColor = BrickColor.new("Pine Cone")
709	p.Material = Enum.Material.Glacier
710	p.MaterialVariant = "2022 Small Stud"
711	p.Anchored = true
712	p.Parent = model
713	end
714	do
715	local p = Instance.new("Part")
716	p.Name = "Rack_L_F"
717	p.Size = Vector3.new(4.74342, 0.3, 0.3)
718	p.CFrame = CFrame.new(-4.96, 2.75, -9.75) * CFrame.Angles(math.rad(71.5651), math.rad(90), math.rad(0))
719	p.BrickColor = BrickColor.new("Medium stone grey")
720	p.Material = Enum.Material.Glacier
721	p.MaterialVariant = "2022 Inlet"
722	p.Anchored = true
723	p.Parent = model
724	end
725	do
726	local p = Instance.new("Part")
727	p.Name = "Rack_L_R"
728	p.Size = Vector3.new(4.92443, 0.3, 0.3)
729	p.CFrame = CFrame.new(-5, 2.75, -11.5) * CFrame.Angles(math.rad(-66.0375), math.rad(-90), math.rad(0))
730	p.BrickColor = BrickColor.new("Medium stone grey")
731	p.Material = Enum.Material.Glacier
732	p.MaterialVariant = "2022 Inlet"
733	p.Anchored = true
734	p.Parent = model
735	end
736	do
737	local p = Instance.new("Part")
738	p.Name = "Rack_L_Tie"
739	p.Size = Vector3.new(0.2, 0.2, 3.5)
740	p.CFrame = CFrame.new(-5.08, 1, -10.75)
741	p.BrickColor = BrickColor.new("Medium stone grey")
742	p.Material = Enum.Material.Glacier
743	p.MaterialVariant = "2022 Inlet"
744	p.Anchored = true
745	p.Parent = model
746	end
747	do
748	local p = Instance.new("Part")
749	p.Name = "Rack_R_F"
750	p.Size = Vector3.new(4.74342, 0.3, 0.3)
751	p.CFrame = CFrame.new(5.04, 2.75, -9.75) * CFrame.Angles(math.rad(71.5651), math.rad(90), math.rad(0))
752	p.BrickColor = BrickColor.new("Medium stone grey")
753	p.Material = Enum.Material.Glacier
754	p.MaterialVariant = "2022 Inlet"
755	p.Anchored = true
756	p.Parent = model
757	end
758	do
759	local p = Instance.new("Part")
760	p.Name = "Rack_R_R"
761	p.Size = Vector3.new(4.92443, 0.3, 0.3)
762	p.CFrame = CFrame.new(5, 2.75, -11.5) * CFrame.Angles(math.rad(-66.0375), math.rad(-90), math.rad(0))
763	p.BrickColor = BrickColor.new("Medium stone grey")
764	p.Material = Enum.Material.Glacier
765	p.MaterialVariant = "2022 Inlet"
766	p.Anchored = true
767	p.Parent = model
768	end
769	do
770	local p = Instance.new("Part")
771	p.Name = "Rack_R_Tie"
772	p.Size = Vector3.new(0.2, 0.2, 3.5)
773	p.CFrame = CFrame.new(4.92, 1, -10.75)
774	p.BrickColor = BrickColor.new("Medium stone grey")
775	p.Material = Enum.Material.Glacier
776	p.MaterialVariant = "2022 Inlet"
777	p.Anchored = true
778	p.Parent = model
779	end
780	do
781	local p = Instance.new("Part")
782	p.Name = "Rack_Shelf1"
783	p.Size = Vector3.new(10, 0.2, 2.8)
784	p.CFrame = CFrame.new(0, 2.46, -10.5)
785	p.BrickColor = BrickColor.new("Dark stone grey")
786	p.Material = Enum.Material.Glacier
787	p.MaterialVariant = "2022 Stud"
788	p.Anchored = true
789	p.Parent = model
790	end
791	do
792	local p = Instance.new("Part")
793	p.Name = "Rack_Shelf1_Lip"
794	p.Size = Vector3.new(10, 0.4, 0.1)
795	p.CFrame = CFrame.new(0, 2.64, -9.1)
796	p.BrickColor = BrickColor.new("Medium stone grey")
797	p.Material = Enum.Material.Glacier
798	p.MaterialVariant = "2022 Inlet"
799	p.Anchored = true
800	p.Parent = model
801	end
802	do
803	local p = Instance.new("Part")
804	p.Name = "Rack_Shelf2"
805	p.Size = Vector3.new(10, 0.2, 2)
806	p.CFrame = CFrame.new(0, 3.96, -11)
807	p.BrickColor = BrickColor.new("Dark stone grey")
808	p.Material = Enum.Material.Glacier
809	p.MaterialVariant = "2022 Stud"
810	p.Anchored = true
811	p.Parent = model
812	end
813	do
814	local p = Instance.new("Part")
815	p.Name = "Rack_Shelf2_Lip"
816	p.Size = Vector3.new(10, 0.4, 0.1)
817	p.CFrame = CFrame.new(0, 4.14, -10)
818	p.BrickColor = BrickColor.new("Medium stone grey")
819	p.Material = Enum.Material.Glacier
820	p.MaterialVariant = "2022 Inlet"
821	p.Anchored = true
822	p.Parent = model
823	end
824	do
825	local p = Instance.new("Part")
826	p.Name = "RackCrateB1_Body"
827	p.Size = Vector3.new(1.5, 1.5, 1.5)
828	p.CFrame = CFrame.new(-3, 3.39, -10.5)
829	p.BrickColor = BrickColor.new("Reddish brown")
830	p.Material = Enum.Material.Glacier
831	p.MaterialVariant = "2022 Small Stud"
832	p.Anchored = true
833	p.Parent = model
834	end
835	do
836	local p = Instance.new("Part")
837	p.Name = "RackCrateB1_X1_pos"
838	p.Size = Vector3.new(1.83848, 0.06, 0.06)
839	p.CFrame = CFrame.new(-3, 3.35, -9.62) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
840	p.BrickColor = BrickColor.new("Pine Cone")
841	p.Material = Enum.Material.Glacier
842	p.MaterialVariant = "2022 Small Stud"
843	p.Anchored = true
844	p.Parent = model
845	end
846	do
847	local p = Instance.new("Part")
848	p.Name = "RackCrateB1_X2_pos"
849	p.Size = Vector3.new(1.83848, 0.06, 0.06)
850	p.CFrame = CFrame.new(-3, 3.35, -9.66) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
851	p.BrickColor = BrickColor.new("Pine Cone")
852	p.Material = Enum.Material.Glacier
853	p.MaterialVariant = "2022 Small Stud"
854	p.Anchored = true
855	p.Parent = model
856	end
857	do
858	local p = Instance.new("Part")
859	p.Name = "RackCrateB1_X1_neg"
860	p.Size = Vector3.new(1.83848, 0.06, 0.06)
861	p.CFrame = CFrame.new(-3, 3.35, -11.3) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
862	p.BrickColor = BrickColor.new("Pine Cone")
863	p.Material = Enum.Material.Glacier
864	p.MaterialVariant = "2022 Small Stud"
865	p.Anchored = true
866	p.Parent = model
867	end
868	do
869	local p = Instance.new("Part")
870	p.Name = "RackCrateB1_X2_neg"
871	p.Size = Vector3.new(1.83848, 0.06, 0.06)
872	p.CFrame = CFrame.new(-3, 3.35, -11.34) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
873	p.BrickColor = BrickColor.new("Pine Cone")
874	p.Material = Enum.Material.Glacier
875	p.MaterialVariant = "2022 Small Stud"
876	p.Anchored = true
877	p.Parent = model
878	end
879	do
880	local p = Instance.new("Part")
881	p.Name = "RackCrateB2_Body"
882	p.Size = Vector3.new(2, 2, 2)
883	p.CFrame = CFrame.new(-0.5, 3.6, -10.5)
884	p.BrickColor = BrickColor.new("Reddish brown")
885	p.Material = Enum.Material.Glacier
886	p.MaterialVariant = "2022 Small Stud"
887	p.Anchored = true
888	p.Parent = model
889	end
890	do
891	local p = Instance.new("Part")
892	p.Name = "RackCrateB2_X1_pos"
893	p.Size = Vector3.new(2.54558, 0.08, 0.08)
894	p.CFrame = CFrame.new(-0.5, 3.6, -9.37) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
895	p.BrickColor = BrickColor.new("Pine Cone")
896	p.Material = Enum.Material.Glacier
897	p.MaterialVariant = "2022 Small Stud"
898	p.Anchored = true
899	p.Parent = model
900	end
901	do
902	local p = Instance.new("Part")
903	p.Name = "RackCrateB2_X2_pos"
904	p.Size = Vector3.new(2.54558, 0.08, 0.08)
905	p.CFrame = CFrame.new(-0.5, 3.6, -9.49) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
906	p.BrickColor = BrickColor.new("Pine Cone")
907	p.Material = Enum.Material.Glacier
908	p.MaterialVariant = "2022 Small Stud"
909	p.Anchored = true
910	p.Parent = model
911	end
912	do
913	local p = Instance.new("Part")
914	p.Name = "RackCrateB2_X1_neg"
915	p.Size = Vector3.new(2.54558, 0.08, 0.08)
916	p.CFrame = CFrame.new(-0.5, 3.6, -11.47) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
917	p.BrickColor = BrickColor.new("Pine Cone")
918	p.Material = Enum.Material.Glacier
919	p.MaterialVariant = "2022 Small Stud"
920	p.Anchored = true
921	p.Parent = model
922	end
923	do
924	local p = Instance.new("Part")
925	p.Name = "RackCrateB2_X2_neg"
926	p.Size = Vector3.new(2.54558, 0.08, 0.08)
927	p.CFrame = CFrame.new(-0.5, 3.6, -11.51) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
928	p.BrickColor = BrickColor.new("Pine Cone")
929	p.Material = Enum.Material.Glacier
930	p.MaterialVariant = "2022 Small Stud"
931	p.Anchored = true
932	p.Parent = model
933	end
934	do
935	local p = Instance.new("Part")
936	p.Name = "RackCrateB3_Body"
937	p.Size = Vector3.new(2.8, 2.8, 2.8)
938	p.CFrame = CFrame.new(2.5, 4, -10.5)
939	p.BrickColor = BrickColor.new("Reddish brown")
940	p.Material = Enum.Material.Glacier
941	p.MaterialVariant = "2022 Small Stud"
942	p.Anchored = true
943	p.Parent = model
944	end
945	do
946	local p = Instance.new("Part")
947	p.Name = "RackCrateB3_X1_pos"
948	p.Size = Vector3.new(3.67695, 0.112, 0.112)
949	p.CFrame = CFrame.new(2.5, 4, -8.93) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
950	p.BrickColor = BrickColor.new("Pine Cone")
951	p.Material = Enum.Material.Glacier
952	p.MaterialVariant = "2022 Small Stud"
953	p.Anchored = true
954	p.Parent = model
955	end
956	do
957	local p = Instance.new("Part")
958	p.Name = "RackCrateB3_X2_pos"
959	p.Size = Vector3.new(3.67695, 0.112, 0.112)
960	p.CFrame = CFrame.new(2.5, 4, -8.97) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
961	p.BrickColor = BrickColor.new("Pine Cone")
962	p.Material = Enum.Material.Glacier
963	p.MaterialVariant = "2022 Small Stud"
964	p.Anchored = true
965	p.Parent = model
966	end
967	do
968	local p = Instance.new("Part")
969	p.Name = "RackCrateB3_X1_neg"
970	p.Size = Vector3.new(3.67695, 0.112, 0.112)
971	p.CFrame = CFrame.new(2.5, 4, -11.87) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
972	p.BrickColor = BrickColor.new("Pine Cone")
973	p.Material = Enum.Material.Glacier
974	p.MaterialVariant = "2022 Small Stud"
975	p.Anchored = true
976	p.Parent = model
977	end
978	do
979	local p = Instance.new("Part")
980	p.Name = "RackCrateB3_X2_neg"
981	p.Size = Vector3.new(3.67695, 0.112, 0.112)
982	p.CFrame = CFrame.new(2.5, 4, -11.91) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
983	p.BrickColor = BrickColor.new("Pine Cone")
984	p.Material = Enum.Material.Glacier
985	p.MaterialVariant = "2022 Small Stud"
986	p.Anchored = true
987	p.Parent = model
988	end
989	do
990	local p = Instance.new("Part")
991	p.Name = "RackCrateT1_Body"
992	p.Size = Vector3.new(1, 1, 1)
993	p.CFrame = CFrame.new(-3.5, 4.68, -11)
994	p.BrickColor = BrickColor.new("Reddish brown")
995	p.Material = Enum.Material.Glacier
996	p.MaterialVariant = "2022 Small Stud"
997	p.Anchored = true
998	p.Parent = model
999	end
1000	do
1001	local p = Instance.new("Part")
1002	p.Name = "RackCrateT1_X1_pos"
1003	p.Size = Vector3.new(1.13137, 0.05, 0.05)
1004	p.CFrame = CFrame.new(-3.5, 4.6, -10.37) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
1005	p.BrickColor = BrickColor.new("Pine Cone")
1006	p.Material = Enum.Material.Glacier
1007	p.MaterialVariant = "2022 Small Stud"
1008	p.Anchored = true
1009	p.Parent = model
1010	end
1011	do
1012	local p = Instance.new("Part")
1013	p.Name = "RackCrateT1_X2_pos"
1014	p.Size = Vector3.new(1.13137, 0.05, 0.05)
1015	p.CFrame = CFrame.new(-3.5, 4.6, -10.45) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
1016	p.BrickColor = BrickColor.new("Pine Cone")
1017	p.Material = Enum.Material.Glacier
1018	p.MaterialVariant = "2022 Small Stud"
1019	p.Anchored = true
1020	p.Parent = model
1021	end
1022	do
1023	local p = Instance.new("Part")
1024	p.Name = "RackCrateT1_X1_neg"
1025	p.Size = Vector3.new(1.13137, 0.05, 0.05)
1026	p.CFrame = CFrame.new(-3.5, 4.6, -11.55) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
1027	p.BrickColor = BrickColor.new("Pine Cone")
1028	p.Material = Enum.Material.Glacier
1029	p.MaterialVariant = "2022 Small Stud"
1030	p.Anchored = true
1031	p.Parent = model
1032	end
1033	do
1034	local p = Instance.new("Part")
1035	p.Name = "RackCrateT1_X2_neg"
1036	p.Size = Vector3.new(1.13137, 0.05, 0.05)
1037	p.CFrame = CFrame.new(-3.5, 4.6, -11.55) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
1038	p.BrickColor = BrickColor.new("Pine Cone")
1039	p.Material = Enum.Material.Glacier
1040	p.MaterialVariant = "2022 Small Stud"
1041	p.Anchored = true
1042	p.Parent = model
1043	end
1044	do
1045	local p = Instance.new("Part")
1046	p.Name = "RackCrateT2_Body"
1047	p.Size = Vector3.new(1.2, 1.2, 1.2)
1048	p.CFrame = CFrame.new(-2, 4.78, -11)
1049	p.BrickColor = BrickColor.new("Reddish brown")
1050	p.Material = Enum.Material.Glacier
1051	p.MaterialVariant = "2022 Small Stud"
1052	p.Anchored = true
1053	p.Parent = model
1054	end
1055	do
1056	local p = Instance.new("Part")
1057	p.Name = "RackCrateT2_X1_pos"
1058	p.Size = Vector3.new(1.41421, 0.05, 0.05)
1059	p.CFrame = CFrame.new(-2, 4.7, -10.27) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
1060	p.BrickColor = BrickColor.new("Pine Cone")
1061	p.Material = Enum.Material.Glacier
1062	p.MaterialVariant = "2022 Small Stud"
1063	p.Anchored = true
1064	p.Parent = model
1065	end
1066	do
1067	local p = Instance.new("Part")
1068	p.Name = "RackCrateT2_X2_pos"
1069	p.Size = Vector3.new(1.41421, 0.05, 0.05)
1070	p.CFrame = CFrame.new(-2, 4.7, -10.35) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
1071	p.BrickColor = BrickColor.new("Pine Cone")
1072	p.Material = Enum.Material.Glacier
1073	p.MaterialVariant = "2022 Small Stud"
1074	p.Anchored = true
1075	p.Parent = model
1076	end
1077	do
1078	local p = Instance.new("Part")
1079	p.Name = "RackCrateT2_X1_neg"
1080	p.Size = Vector3.new(1.41421, 0.05, 0.05)
1081	p.CFrame = CFrame.new(-2, 4.7, -11.65) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
1082	p.BrickColor = BrickColor.new("Pine Cone")
1083	p.Material = Enum.Material.Glacier
1084	p.MaterialVariant = "2022 Small Stud"
1085	p.Anchored = true
1086	p.Parent = model
1087	end
1088	do
1089	local p = Instance.new("Part")
1090	p.Name = "RackCrateT2_X2_neg"
1091	p.Size = Vector3.new(1.41421, 0.05, 0.05)
1092	p.CFrame = CFrame.new(-2, 4.7, -11.65) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
1093	p.BrickColor = BrickColor.new("Pine Cone")
1094	p.Material = Enum.Material.Glacier
1095	p.MaterialVariant = "2022 Small Stud"
1096	p.Anchored = true
1097	p.Parent = model
1098	end
1099	do
1100	local p = Instance.new("Part")
1101	p.Name = "RackCrateT3_Body"
1102	p.Size = Vector3.new(1.5, 1.5, 1.5)
1103	p.CFrame = CFrame.new(-0.2, 4.89, -11)
1104	p.BrickColor = BrickColor.new("Reddish brown")
1105	p.Material = Enum.Material.Glacier
1106	p.MaterialVariant = "2022 Small Stud"
1107	p.Anchored = true
1108	p.Parent = model
1109	end
1110	do
1111	local p = Instance.new("Part")
1112	p.Name = "RackCrateT3_X1_pos"
1113	p.Size = Vector3.new(1.83848, 0.06, 0.06)
1114	p.CFrame = CFrame.new(-0.2, 4.85, -10.12) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
1115	p.BrickColor = BrickColor.new("Pine Cone")
1116	p.Material = Enum.Material.Glacier
1117	p.MaterialVariant = "2022 Small Stud"
1118	p.Anchored = true
1119	p.Parent = model
1120	end
1121	do
1122	local p = Instance.new("Part")
1123	p.Name = "RackCrateT3_X2_pos"
1124	p.Size = Vector3.new(1.83848, 0.06, 0.06)
1125	p.CFrame = CFrame.new(-0.2, 4.85, -10.16) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
1126	p.BrickColor = BrickColor.new("Pine Cone")
1127	p.Material = Enum.Material.Glacier
1128	p.MaterialVariant = "2022 Small Stud"
1129	p.Anchored = true
1130	p.Parent = model
1131	end
1132	do
1133	local p = Instance.new("Part")
1134	p.Name = "RackCrateT3_X1_neg"
1135	p.Size = Vector3.new(1.83848, 0.06, 0.06)
1136	p.CFrame = CFrame.new(-0.2, 4.85, -11.8) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
1137	p.BrickColor = BrickColor.new("Pine Cone")
1138	p.Material = Enum.Material.Glacier
1139	p.MaterialVariant = "2022 Small Stud"
1140	p.Anchored = true
1141	p.Parent = model
1142	end
1143	do
1144	local p = Instance.new("Part")
1145	p.Name = "RackCrateT3_X2_neg"
1146	p.Size = Vector3.new(1.83848, 0.06, 0.06)
1147	p.CFrame = CFrame.new(-0.2, 4.85, -11.84) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
1148	p.BrickColor = BrickColor.new("Pine Cone")
1149	p.Material = Enum.Material.Glacier
1150	p.MaterialVariant = "2022 Small Stud"
1151	p.Anchored = true
1152	p.Parent = model
1153	end
1154	do
1155	local p = Instance.new("Part")
1156	p.Name = "RackCrateT4_Body"
1157	p.Size = Vector3.new(2, 2, 2)
1158	p.CFrame = CFrame.new(2, 5.1, -11)
1159	p.BrickColor = BrickColor.new("Reddish brown")
1160	p.Material = Enum.Material.Glacier
1161	p.MaterialVariant = "2022 Small Stud"
1162	p.Anchored = true
1163	p.Parent = model
1164	end
1165	do
1166	local p = Instance.new("Part")
1167	p.Name = "RackCrateT4_X1_pos"
1168	p.Size = Vector3.new(2.54558, 0.08, 0.08)
1169	p.CFrame = CFrame.new(2, 5.1, -9.83) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
1170	p.BrickColor = BrickColor.new("Pine Cone")
1171	p.Material = Enum.Material.Glacier
1172	p.MaterialVariant = "2022 Small Stud"
1173	p.Anchored = true
1174	p.Parent = model
1175	end
1176	do
1177	local p = Instance.new("Part")
1178	p.Name = "RackCrateT4_X2_pos"
1179	p.Size = Vector3.new(2.54558, 0.08, 0.08)
1180	p.CFrame = CFrame.new(2, 5.1, -9.87) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
1181	p.BrickColor = BrickColor.new("Pine Cone")
1182	p.Material = Enum.Material.Glacier
1183	p.MaterialVariant = "2022 Small Stud"
1184	p.Anchored = true
1185	p.Parent = model
1186	end
1187	do
1188	local p = Instance.new("Part")
1189	p.Name = "RackCrateT4_X1_neg"
1190	p.Size = Vector3.new(2.54558, 0.08, 0.08)
1191	p.CFrame = CFrame.new(2, 5.1, -12.05) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
1192	p.BrickColor = BrickColor.new("Pine Cone")
1193	p.Material = Enum.Material.Glacier
1194	p.MaterialVariant = "2022 Small Stud"
1195	p.Anchored = true
1196	p.Parent = model
1197	end
1198	do
1199	local p = Instance.new("Part")
1200	p.Name = "RackCrateT4_X2_neg"
1201	p.Size = Vector3.new(2.54558, 0.08, 0.08)
1202	p.CFrame = CFrame.new(2, 5.1, -12.09) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
1203	p.BrickColor = BrickColor.new("Pine Cone")
1204	p.Material = Enum.Material.Glacier
1205	p.MaterialVariant = "2022 Small Stud"
1206	p.Anchored = true
1207	p.Parent = model
1208	end
1209	do
1210	local p = Instance.new("Part")
1211	p.Name = "FloorCrate1_Body"
1212	p.Size = Vector3.new(1.5, 1.5, 1.5)
1213	p.CFrame = CFrame.new(-7, 1.29, -12)
1214	p.BrickColor = BrickColor.new("Reddish brown")
1215	p.Material = Enum.Material.Glacier
1216	p.MaterialVariant = "2022 Small Stud"
1217	p.Anchored = true
1218	p.Parent = model
1219	end
1220	do
1221	local p = Instance.new("Part")
1222	p.Name = "FloorCrate1_X1_pos"
1223	p.Size = Vector3.new(1.83848, 0.06, 0.06)
1224	p.CFrame = CFrame.new(-7, 1.25, -11.12) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
1225	p.BrickColor = BrickColor.new("Pine Cone")
1226	p.Material = Enum.Material.Glacier
1227	p.MaterialVariant = "2022 Small Stud"
1228	p.Anchored = true
1229	p.Parent = model
1230	end
1231	do
1232	local p = Instance.new("Part")
1233	p.Name = "FloorCrate1_X2_pos"
1234	p.Size = Vector3.new(1.83848, 0.06, 0.06)
1235	p.CFrame = CFrame.new(-7, 1.25, -11.16) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
1236	p.BrickColor = BrickColor.new("Pine Cone")
1237	p.Material = Enum.Material.Glacier
1238	p.MaterialVariant = "2022 Small Stud"
1239	p.Anchored = true
1240	p.Parent = model
1241	end
1242	do
1243	local p = Instance.new("Part")
1244	p.Name = "FloorCrate1_X1_neg"
1245	p.Size = Vector3.new(1.83848, 0.06, 0.06)
1246	p.CFrame = CFrame.new(-7, 1.25, -12.8) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(45))
1247	p.BrickColor = BrickColor.new("Pine Cone")
1248	p.Material = Enum.Material.Glacier
1249	p.MaterialVariant = "2022 Small Stud"
1250	p.Anchored = true
1251	p.Parent = model
1252	end
1253	do
1254	local p = Instance.new("Part")
1255	p.Name = "FloorCrate1_X2_neg"
1256	p.Size = Vector3.new(1.83848, 0.06, 0.06)
1257	p.CFrame = CFrame.new(-7, 1.25, -12.84) * CFrame.Angles(math.rad(0), math.rad(0), math.rad(-45))
1258	p.BrickColor = BrickColor.new("Pine Cone")
1259	p.Material = Enum.Material.Glacier
1260	p.MaterialVariant = "2022 Small Stud"
1261	p.Anchored = true
1262	p.Parent = model
1263	end
1264	do
1265	local p = Instance.new("Part")
1266	p.Name = "FloorCrate2_Body"
1267	p.Size = Vector3.new(1, 1, 1)
1268	p.CFrame = CFrame.new(7, 1.04, -13)
1269	p.BrickColor = BrickColor.new("Reddish brown")
1270	p.Material = Enum.Material.Glacier
1271	p.MaterialVariant = "2022 Small Stud"
1272	p.Anchored = true
1273	p.Parent = model
1274	end
1275	do
1276	local p = Instance.new("Part")
1277	p.Name = "FloorCrate2_X1_pos"
1278	p.Size = Vector3.new(1.13137, 0.05, 0.05)
1279	p.CFrame = CFrame.new(7.63, 1, -13) * CFrame.Angles(math.rad(-45), math.rad(-90), math.rad(0))
1280	p.BrickColor = BrickColor.new("Pine Cone")
1281	p.Material = Enum.Material.Glacier
1282	p.MaterialVariant = "2022 Small Stud"
1283	p.Anchored = true
1284	p.Parent = model
1285	end
1286	do
1287	local p = Instance.new("Part")
1288	p.Name = "FloorCrate2_X2_pos"
1289	p.Size = Vector3.new(1.13137, 0.05, 0.05)
1290	p.CFrame = CFrame.new(7.55, 1, -13) * CFrame.Angles(math.rad(45), math.rad(-90), math.rad(0))
1291	p.BrickColor = BrickColor.new("Pine Cone")
1292	p.Material = Enum.Material.Glacier
1293	p.MaterialVariant = "2022 Small Stud"
1294	p.Anchored = true
1295	p.Parent = model
1296	end
1297	do
1298	local p = Instance.new("Part")
1299	p.Name = "FloorCrate2_X1_neg"
1300	p.Size = Vector3.new(1.13137, 0.05, 0.05)
1301	p.CFrame = CFrame.new(6.45, 1, -13) * CFrame.Angles(math.rad(-45), math.rad(-90), math.rad(0))
1302	p.BrickColor = BrickColor.new("Pine Cone")
1303	p.Material = Enum.Material.Glacier
1304	p.MaterialVariant = "2022 Small Stud"
1305	p.Anchored = true
1306	p.Parent = model
1307	end
1308	do
1309	local p = Instance.new("Part")
1310	p.Name = "FloorCrate2_X2_neg"
1311	p.Size = Vector3.new(1.13137, 0.05, 0.05)
1312	p.CFrame = CFrame.new(6.45, 1, -13) * CFrame.Angles(math.rad(45), math.rad(-90), math.rad(0))
1313	p.BrickColor = BrickColor.new("Pine Cone")
1314	p.Material = Enum.Material.Glacier
1315	p.MaterialVariant = "2022 Small Stud"
1316	p.Anchored = true
1317	p.Parent = model
1318	end
1319	do
1320	local rightV = Vector3.new(0,-1,0).Unit
1321	local upV = (Vector3.new(1,0,0) - Vector3.new(1,0,0):Dot(rightV)*rightV).Unit
1322	local normalV = upV:Cross(rightV)
1323	local pos = Vector3.new(-5.76, 5.8, 0)
1324	local cyl = Instance.new("Part")
1325	cyl.Shape = Enum.PartType.Cylinder
1326	cyl.Size = Vector3.new(0.08, 1.08, 1.08)
1327	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1328	cyl.BrickColor = BrickColor.new("Nougat")
1329	cyl.Material = Enum.Material.Glacier
1330	cyl.MaterialVariant = "2022 Stud"
1331	cyl.Anchored = true; cyl.Parent = workspace
1332	local cuts = {}
1333	local hole = Instance.new("Part")
1334	hole.Shape = Enum.PartType.Cylinder
1335	hole.Size = Vector3.new(0.28, 0.72, 0.72)
1336	hole.CFrame = cyl.CFrame
1337	hole.BrickColor = BrickColor.new("Nougat")
1338	hole.Material = Enum.Material.Glacier
1339	hole.MaterialVariant = "2022 Stud"
1340	hole.Anchored = true; hole.Parent = workspace
1341	table.insert(cuts, hole)
1342	local angBoxes = {}
1343	do
1344	local edgeDir = 1rightV + 0upV
1345	local edgePerp = 0rightV + 1upV
1346	local cut = Instance.new("Part")
1347	cut.Size = Vector3.new(2.16, 0.28, 2.16)
1348	cut.CFrame = CFrame.fromMatrix(pos + -1 * 1.08 * edgePerp, edgeDir, normalV)
1349	cut.BrickColor = BrickColor.new("Nougat")
1350	cut.Material = Enum.Material.Glacier
1351	cut.MaterialVariant = "2022 Stud"
1352	cut.Anchored = true; cut.Parent = workspace
1353	table.insert(angBoxes, cut)
1354	end
1355	do
1356	local edgeDir = -1rightV + 0upV
1357	local edgePerp = 0rightV + -1upV
1358	local cut = Instance.new("Part")
1359	cut.Size = Vector3.new(2.16, 0.28, 2.16)
1360	cut.CFrame = CFrame.fromMatrix(pos + 1 * 1.08 * edgePerp, edgeDir, normalV)
1361	cut.BrickColor = BrickColor.new("Nougat")
1362	cut.Material = Enum.Material.Glacier
1363	cut.MaterialVariant = "2022 Stud"
1364	cut.Anchored = true; cut.Parent = workspace
1365	table.insert(angBoxes, cut)
1366	end
1367	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1368	if #cuts > 0 then
1369	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1370	for _, c in ipairs(cuts) do c:Destroy() end
1371	if ok and result then
1372	cyl:Destroy()
1373	result.Name = "SquatCrate1_H_pos"; result.Anchored = true; result.Parent = model
1374	else
1375	cyl.Name = "SquatCrate1_H_pos"; cyl.Parent = model
1376	end
1377	else
1378	cyl.Name = "SquatCrate1_H_pos"; cyl.Parent = model
1379	end
1380	end
1381	do
1382	local rightV = Vector3.new(0,-1,0).Unit
1383	local upV = (Vector3.new(-1,0,0) - Vector3.new(-1,0,0):Dot(rightV)*rightV).Unit
1384	local normalV = upV:Cross(rightV)
1385	local pos = Vector3.new(-9.52, 5.8, 0)
1386	local cyl = Instance.new("Part")
1387	cyl.Shape = Enum.PartType.Cylinder
1388	cyl.Size = Vector3.new(0.08, 1.08, 1.08)
1389	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1390	cyl.BrickColor = BrickColor.new("Nougat")
1391	cyl.Material = Enum.Material.Glacier
1392	cyl.MaterialVariant = "2022 Stud"
1393	cyl.Anchored = true; cyl.Parent = workspace
1394	local cuts = {}
1395	local hole = Instance.new("Part")
1396	hole.Shape = Enum.PartType.Cylinder
1397	hole.Size = Vector3.new(0.28, 0.72, 0.72)
1398	hole.CFrame = cyl.CFrame
1399	hole.BrickColor = BrickColor.new("Nougat")
1400	hole.Material = Enum.Material.Glacier
1401	hole.MaterialVariant = "2022 Stud"
1402	hole.Anchored = true; hole.Parent = workspace
1403	table.insert(cuts, hole)
1404	local angBoxes = {}
1405	do
1406	local edgeDir = 1rightV + 0upV
1407	local edgePerp = 0rightV + 1upV
1408	local cut = Instance.new("Part")
1409	cut.Size = Vector3.new(2.16, 0.28, 2.16)
1410	cut.CFrame = CFrame.fromMatrix(pos + -1 * 1.08 * edgePerp, edgeDir, normalV)
1411	cut.BrickColor = BrickColor.new("Nougat")
1412	cut.Material = Enum.Material.Glacier
1413	cut.MaterialVariant = "2022 Stud"
1414	cut.Anchored = true; cut.Parent = workspace
1415	table.insert(angBoxes, cut)
1416	end
1417	do
1418	local edgeDir = -1rightV + 0upV
1419	local edgePerp = 0rightV + -1upV
1420	local cut = Instance.new("Part")
1421	cut.Size = Vector3.new(2.16, 0.28, 2.16)
1422	cut.CFrame = CFrame.fromMatrix(pos + 1 * 1.08 * edgePerp, edgeDir, normalV)
1423	cut.BrickColor = BrickColor.new("Nougat")
1424	cut.Material = Enum.Material.Glacier
1425	cut.MaterialVariant = "2022 Stud"
1426	cut.Anchored = true; cut.Parent = workspace
1427	table.insert(angBoxes, cut)
1428	end
1429	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1430	if #cuts > 0 then
1431	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1432	for _, c in ipairs(cuts) do c:Destroy() end
1433	if ok and result then
1434	cyl:Destroy()
1435	result.Name = "SquatCrate1_H_neg"; result.Anchored = true; result.Parent = model
1436	else
1437	cyl.Name = "SquatCrate1_H_neg"; cyl.Parent = model
1438	end
1439	else
1440	cyl.Name = "SquatCrate1_H_neg"; cyl.Parent = model
1441	end
1442	end
1443	do
1444	local rightV = Vector3.new(0,-1,0).Unit
1445	local upV = (Vector3.new(1,0,0) - Vector3.new(1,0,0):Dot(rightV)*rightV).Unit
1446	local normalV = upV:Cross(rightV)
1447	local pos = Vector3.new(-5.76, 5.8, 8)
1448	local cyl = Instance.new("Part")
1449	cyl.Shape = Enum.PartType.Cylinder
1450	cyl.Size = Vector3.new(0.08, 1.08, 1.08)
1451	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1452	cyl.BrickColor = BrickColor.new("Nougat")
1453	cyl.Material = Enum.Material.Glacier
1454	cyl.MaterialVariant = "2022 Stud"
1455	cyl.Anchored = true; cyl.Parent = workspace
1456	local cuts = {}
1457	local hole = Instance.new("Part")
1458	hole.Shape = Enum.PartType.Cylinder
1459	hole.Size = Vector3.new(0.28, 0.72, 0.72)
1460	hole.CFrame = cyl.CFrame
1461	hole.BrickColor = BrickColor.new("Nougat")
1462	hole.Material = Enum.Material.Glacier
1463	hole.MaterialVariant = "2022 Stud"
1464	hole.Anchored = true; hole.Parent = workspace
1465	table.insert(cuts, hole)
1466	local angBoxes = {}
1467	do
1468	local edgeDir = 1rightV + 0upV
1469	local edgePerp = 0rightV + 1upV
1470	local cut = Instance.new("Part")
1471	cut.Size = Vector3.new(2.16, 0.28, 2.16)
1472	cut.CFrame = CFrame.fromMatrix(pos + -1 * 1.08 * edgePerp, edgeDir, normalV)
1473	cut.BrickColor = BrickColor.new("Nougat")
1474	cut.Material = Enum.Material.Glacier
1475	cut.MaterialVariant = "2022 Stud"
1476	cut.Anchored = true; cut.Parent = workspace
1477	table.insert(angBoxes, cut)
1478	end
1479	do
1480	local edgeDir = -1rightV + 0upV
1481	local edgePerp = 0rightV + -1upV
1482	local cut = Instance.new("Part")
1483	cut.Size = Vector3.new(2.16, 0.28, 2.16)
1484	cut.CFrame = CFrame.fromMatrix(pos + 1 * 1.08 * edgePerp, edgeDir, normalV)
1485	cut.BrickColor = BrickColor.new("Nougat")
1486	cut.Material = Enum.Material.Glacier
1487	cut.MaterialVariant = "2022 Stud"
1488	cut.Anchored = true; cut.Parent = workspace
1489	table.insert(angBoxes, cut)
1490	end
1491	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1492	if #cuts > 0 then
1493	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1494	for _, c in ipairs(cuts) do c:Destroy() end
1495	if ok and result then
1496	cyl:Destroy()
1497	result.Name = "SquatCrate2_H_pos"; result.Anchored = true; result.Parent = model
1498	else
1499	cyl.Name = "SquatCrate2_H_pos"; cyl.Parent = model
1500	end
1501	else
1502	cyl.Name = "SquatCrate2_H_pos"; cyl.Parent = model
1503	end
1504	end
1505	do
1506	local rightV = Vector3.new(0,-1,0).Unit
1507	local upV = (Vector3.new(-1,0,0) - Vector3.new(-1,0,0):Dot(rightV)*rightV).Unit
1508	local normalV = upV:Cross(rightV)
1509	local pos = Vector3.new(-9.52, 5.8, 8)
1510	local cyl = Instance.new("Part")
1511	cyl.Shape = Enum.PartType.Cylinder
1512	cyl.Size = Vector3.new(0.08, 1.08, 1.08)
1513	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1514	cyl.BrickColor = BrickColor.new("Nougat")
1515	cyl.Material = Enum.Material.Glacier
1516	cyl.MaterialVariant = "2022 Stud"
1517	cyl.Anchored = true; cyl.Parent = workspace
1518	local cuts = {}
1519	local hole = Instance.new("Part")
1520	hole.Shape = Enum.PartType.Cylinder
1521	hole.Size = Vector3.new(0.28, 0.72, 0.72)
1522	hole.CFrame = cyl.CFrame
1523	hole.BrickColor = BrickColor.new("Nougat")
1524	hole.Material = Enum.Material.Glacier
1525	hole.MaterialVariant = "2022 Stud"
1526	hole.Anchored = true; hole.Parent = workspace
1527	table.insert(cuts, hole)
1528	local angBoxes = {}
1529	do
1530	local edgeDir = 1rightV + 0upV
1531	local edgePerp = 0rightV + 1upV
1532	local cut = Instance.new("Part")
1533	cut.Size = Vector3.new(2.16, 0.28, 2.16)
1534	cut.CFrame = CFrame.fromMatrix(pos + -1 * 1.08 * edgePerp, edgeDir, normalV)
1535	cut.BrickColor = BrickColor.new("Nougat")
1536	cut.Material = Enum.Material.Glacier
1537	cut.MaterialVariant = "2022 Stud"
1538	cut.Anchored = true; cut.Parent = workspace
1539	table.insert(angBoxes, cut)
1540	end
1541	do
1542	local edgeDir = -1rightV + 0upV
1543	local edgePerp = 0rightV + -1upV
1544	local cut = Instance.new("Part")
1545	cut.Size = Vector3.new(2.16, 0.28, 2.16)
1546	cut.CFrame = CFrame.fromMatrix(pos + 1 * 1.08 * edgePerp, edgeDir, normalV)
1547	cut.BrickColor = BrickColor.new("Nougat")
1548	cut.Material = Enum.Material.Glacier
1549	cut.MaterialVariant = "2022 Stud"
1550	cut.Anchored = true; cut.Parent = workspace
1551	table.insert(angBoxes, cut)
1552	end
1553	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1554	if #cuts > 0 then
1555	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1556	for _, c in ipairs(cuts) do c:Destroy() end
1557	if ok and result then
1558	cyl:Destroy()
1559	result.Name = "SquatCrate2_H_neg"; result.Anchored = true; result.Parent = model
1560	else
1561	cyl.Name = "SquatCrate2_H_neg"; cyl.Parent = model
1562	end
1563	else
1564	cyl.Name = "SquatCrate2_H_neg"; cyl.Parent = model
1565	end
1566	end
1567	do
1568	local rightV = Vector3.new(0,-1,0).Unit
1569	local upV = (Vector3.new(1,0,0) - Vector3.new(1,0,0):Dot(rightV)*rightV).Unit
1570	local normalV = upV:Cross(rightV)
1571	local pos = Vector3.new(7.2, 4.5, 1)
1572	local cyl = Instance.new("Part")
1573	cyl.Shape = Enum.PartType.Cylinder
1574	cyl.Size = Vector3.new(0.08, 0.6, 0.6)
1575	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1576	cyl.BrickColor = BrickColor.new("Nougat")
1577	cyl.Material = Enum.Material.Glacier
1578	cyl.MaterialVariant = "2022 Stud"
1579	cyl.Anchored = true; cyl.Parent = workspace
1580	local cuts = {}
1581	local hole = Instance.new("Part")
1582	hole.Shape = Enum.PartType.Cylinder
1583	hole.Size = Vector3.new(0.28, 0.4, 0.4)
1584	hole.CFrame = cyl.CFrame
1585	hole.BrickColor = BrickColor.new("Nougat")
1586	hole.Material = Enum.Material.Glacier
1587	hole.MaterialVariant = "2022 Stud"
1588	hole.Anchored = true; hole.Parent = workspace
1589	table.insert(cuts, hole)
1590	local angBoxes = {}
1591	do
1592	local edgeDir = 1rightV + 0upV
1593	local edgePerp = 0rightV + 1upV
1594	local cut = Instance.new("Part")
1595	cut.Size = Vector3.new(1.2, 0.28, 1.2)
1596	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.6 * edgePerp, edgeDir, normalV)
1597	cut.BrickColor = BrickColor.new("Nougat")
1598	cut.Material = Enum.Material.Glacier
1599	cut.MaterialVariant = "2022 Stud"
1600	cut.Anchored = true; cut.Parent = workspace
1601	table.insert(angBoxes, cut)
1602	end
1603	do
1604	local edgeDir = -1rightV + 0upV
1605	local edgePerp = 0rightV + -1upV
1606	local cut = Instance.new("Part")
1607	cut.Size = Vector3.new(1.2, 0.28, 1.2)
1608	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.6 * edgePerp, edgeDir, normalV)
1609	cut.BrickColor = BrickColor.new("Nougat")
1610	cut.Material = Enum.Material.Glacier
1611	cut.MaterialVariant = "2022 Stud"
1612	cut.Anchored = true; cut.Parent = workspace
1613	table.insert(angBoxes, cut)
1614	end
1615	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1616	if #cuts > 0 then
1617	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1618	for _, c in ipairs(cuts) do c:Destroy() end
1619	if ok and result then
1620	cyl:Destroy()
1621	result.Name = "BenchCrate1_H_pos"; result.Anchored = true; result.Parent = model
1622	else
1623	cyl.Name = "BenchCrate1_H_pos"; cyl.Parent = model
1624	end
1625	else
1626	cyl.Name = "BenchCrate1_H_pos"; cyl.Parent = model
1627	end
1628	end
1629	do
1630	local rightV = Vector3.new(0,-1,0).Unit
1631	local upV = (Vector3.new(-1,0,0) - Vector3.new(-1,0,0):Dot(rightV)*rightV).Unit
1632	local normalV = upV:Cross(rightV)
1633	local pos = Vector3.new(5.2, 4.5, 1)
1634	local cyl = Instance.new("Part")
1635	cyl.Shape = Enum.PartType.Cylinder
1636	cyl.Size = Vector3.new(0.08, 0.6, 0.6)
1637	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1638	cyl.BrickColor = BrickColor.new("Nougat")
1639	cyl.Material = Enum.Material.Glacier
1640	cyl.MaterialVariant = "2022 Stud"
1641	cyl.Anchored = true; cyl.Parent = workspace
1642	local cuts = {}
1643	local hole = Instance.new("Part")
1644	hole.Shape = Enum.PartType.Cylinder
1645	hole.Size = Vector3.new(0.28, 0.4, 0.4)
1646	hole.CFrame = cyl.CFrame
1647	hole.BrickColor = BrickColor.new("Nougat")
1648	hole.Material = Enum.Material.Glacier
1649	hole.MaterialVariant = "2022 Stud"
1650	hole.Anchored = true; hole.Parent = workspace
1651	table.insert(cuts, hole)
1652	local angBoxes = {}
1653	do
1654	local edgeDir = 1rightV + 0upV
1655	local edgePerp = 0rightV + 1upV
1656	local cut = Instance.new("Part")
1657	cut.Size = Vector3.new(1.2, 0.28, 1.2)
1658	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.6 * edgePerp, edgeDir, normalV)
1659	cut.BrickColor = BrickColor.new("Nougat")
1660	cut.Material = Enum.Material.Glacier
1661	cut.MaterialVariant = "2022 Stud"
1662	cut.Anchored = true; cut.Parent = workspace
1663	table.insert(angBoxes, cut)
1664	end
1665	do
1666	local edgeDir = -1rightV + 0upV
1667	local edgePerp = 0rightV + -1upV
1668	local cut = Instance.new("Part")
1669	cut.Size = Vector3.new(1.2, 0.28, 1.2)
1670	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.6 * edgePerp, edgeDir, normalV)
1671	cut.BrickColor = BrickColor.new("Nougat")
1672	cut.Material = Enum.Material.Glacier
1673	cut.MaterialVariant = "2022 Stud"
1674	cut.Anchored = true; cut.Parent = workspace
1675	table.insert(angBoxes, cut)
1676	end
1677	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1678	if #cuts > 0 then
1679	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1680	for _, c in ipairs(cuts) do c:Destroy() end
1681	if ok and result then
1682	cyl:Destroy()
1683	result.Name = "BenchCrate1_H_neg"; result.Anchored = true; result.Parent = model
1684	else
1685	cyl.Name = "BenchCrate1_H_neg"; cyl.Parent = model
1686	end
1687	else
1688	cyl.Name = "BenchCrate1_H_neg"; cyl.Parent = model
1689	end
1690	end
1691	do
1692	local rightV = Vector3.new(0,-1,0).Unit
1693	local upV = (Vector3.new(1,0,0) - Vector3.new(1,0,0):Dot(rightV)*rightV).Unit
1694	local normalV = upV:Cross(rightV)
1695	local pos = Vector3.new(7.2, 4.5, 7)
1696	local cyl = Instance.new("Part")
1697	cyl.Shape = Enum.PartType.Cylinder
1698	cyl.Size = Vector3.new(0.08, 0.6, 0.6)
1699	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1700	cyl.BrickColor = BrickColor.new("Nougat")
1701	cyl.Material = Enum.Material.Glacier
1702	cyl.MaterialVariant = "2022 Stud"
1703	cyl.Anchored = true; cyl.Parent = workspace
1704	local cuts = {}
1705	local hole = Instance.new("Part")
1706	hole.Shape = Enum.PartType.Cylinder
1707	hole.Size = Vector3.new(0.28, 0.4, 0.4)
1708	hole.CFrame = cyl.CFrame
1709	hole.BrickColor = BrickColor.new("Nougat")
1710	hole.Material = Enum.Material.Glacier
1711	hole.MaterialVariant = "2022 Stud"
1712	hole.Anchored = true; hole.Parent = workspace
1713	table.insert(cuts, hole)
1714	local angBoxes = {}
1715	do
1716	local edgeDir = 1rightV + 0upV
1717	local edgePerp = 0rightV + 1upV
1718	local cut = Instance.new("Part")
1719	cut.Size = Vector3.new(1.2, 0.28, 1.2)
1720	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.6 * edgePerp, edgeDir, normalV)
1721	cut.BrickColor = BrickColor.new("Nougat")
1722	cut.Material = Enum.Material.Glacier
1723	cut.MaterialVariant = "2022 Stud"
1724	cut.Anchored = true; cut.Parent = workspace
1725	table.insert(angBoxes, cut)
1726	end
1727	do
1728	local edgeDir = -1rightV + 0upV
1729	local edgePerp = 0rightV + -1upV
1730	local cut = Instance.new("Part")
1731	cut.Size = Vector3.new(1.2, 0.28, 1.2)
1732	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.6 * edgePerp, edgeDir, normalV)
1733	cut.BrickColor = BrickColor.new("Nougat")
1734	cut.Material = Enum.Material.Glacier
1735	cut.MaterialVariant = "2022 Stud"
1736	cut.Anchored = true; cut.Parent = workspace
1737	table.insert(angBoxes, cut)
1738	end
1739	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1740	if #cuts > 0 then
1741	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1742	for _, c in ipairs(cuts) do c:Destroy() end
1743	if ok and result then
1744	cyl:Destroy()
1745	result.Name = "BenchCrate2_H_pos"; result.Anchored = true; result.Parent = model
1746	else
1747	cyl.Name = "BenchCrate2_H_pos"; cyl.Parent = model
1748	end
1749	else
1750	cyl.Name = "BenchCrate2_H_pos"; cyl.Parent = model
1751	end
1752	end
1753	do
1754	local rightV = Vector3.new(0,-1,0).Unit
1755	local upV = (Vector3.new(-1,0,0) - Vector3.new(-1,0,0):Dot(rightV)*rightV).Unit
1756	local normalV = upV:Cross(rightV)
1757	local pos = Vector3.new(5.2, 4.5, 7)
1758	local cyl = Instance.new("Part")
1759	cyl.Shape = Enum.PartType.Cylinder
1760	cyl.Size = Vector3.new(0.08, 0.6, 0.6)
1761	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1762	cyl.BrickColor = BrickColor.new("Nougat")
1763	cyl.Material = Enum.Material.Glacier
1764	cyl.MaterialVariant = "2022 Stud"
1765	cyl.Anchored = true; cyl.Parent = workspace
1766	local cuts = {}
1767	local hole = Instance.new("Part")
1768	hole.Shape = Enum.PartType.Cylinder
1769	hole.Size = Vector3.new(0.28, 0.4, 0.4)
1770	hole.CFrame = cyl.CFrame
1771	hole.BrickColor = BrickColor.new("Nougat")
1772	hole.Material = Enum.Material.Glacier
1773	hole.MaterialVariant = "2022 Stud"
1774	hole.Anchored = true; hole.Parent = workspace
1775	table.insert(cuts, hole)
1776	local angBoxes = {}
1777	do
1778	local edgeDir = 1rightV + 0upV
1779	local edgePerp = 0rightV + 1upV
1780	local cut = Instance.new("Part")
1781	cut.Size = Vector3.new(1.2, 0.28, 1.2)
1782	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.6 * edgePerp, edgeDir, normalV)
1783	cut.BrickColor = BrickColor.new("Nougat")
1784	cut.Material = Enum.Material.Glacier
1785	cut.MaterialVariant = "2022 Stud"
1786	cut.Anchored = true; cut.Parent = workspace
1787	table.insert(angBoxes, cut)
1788	end
1789	do
1790	local edgeDir = -1rightV + 0upV
1791	local edgePerp = 0rightV + -1upV
1792	local cut = Instance.new("Part")
1793	cut.Size = Vector3.new(1.2, 0.28, 1.2)
1794	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.6 * edgePerp, edgeDir, normalV)
1795	cut.BrickColor = BrickColor.new("Nougat")
1796	cut.Material = Enum.Material.Glacier
1797	cut.MaterialVariant = "2022 Stud"
1798	cut.Anchored = true; cut.Parent = workspace
1799	table.insert(angBoxes, cut)
1800	end
1801	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1802	if #cuts > 0 then
1803	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1804	for _, c in ipairs(cuts) do c:Destroy() end
1805	if ok and result then
1806	cyl:Destroy()
1807	result.Name = "BenchCrate2_H_neg"; result.Anchored = true; result.Parent = model
1808	else
1809	cyl.Name = "BenchCrate2_H_neg"; cyl.Parent = model
1810	end
1811	else
1812	cyl.Name = "BenchCrate2_H_neg"; cyl.Parent = model
1813	end
1814	end
1815	do
1816	local rightV = Vector3.new(0,-1,0).Unit
1817	local upV = (Vector3.new(0,0,1) - Vector3.new(0,0,1):Dot(rightV)*rightV).Unit
1818	local normalV = upV:Cross(rightV)
1819	local pos = Vector3.new(-3, 3.35, -9.75)
1820	local cyl = Instance.new("Part")
1821	cyl.Shape = Enum.PartType.Cylinder
1822	cyl.Size = Vector3.new(0.08, 0.45, 0.45)
1823	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1824	cyl.BrickColor = BrickColor.new("Nougat")
1825	cyl.Material = Enum.Material.Glacier
1826	cyl.MaterialVariant = "2022 Stud"
1827	cyl.Anchored = true; cyl.Parent = workspace
1828	local cuts = {}
1829	local hole = Instance.new("Part")
1830	hole.Shape = Enum.PartType.Cylinder
1831	hole.Size = Vector3.new(0.28, 0.3, 0.3)
1832	hole.CFrame = cyl.CFrame
1833	hole.BrickColor = BrickColor.new("Nougat")
1834	hole.Material = Enum.Material.Glacier
1835	hole.MaterialVariant = "2022 Stud"
1836	hole.Anchored = true; hole.Parent = workspace
1837	table.insert(cuts, hole)
1838	local angBoxes = {}
1839	do
1840	local edgeDir = 1rightV + 0upV
1841	local edgePerp = 0rightV + 1upV
1842	local cut = Instance.new("Part")
1843	cut.Size = Vector3.new(0.9, 0.28, 0.9)
1844	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.45 * edgePerp, edgeDir, normalV)
1845	cut.BrickColor = BrickColor.new("Nougat")
1846	cut.Material = Enum.Material.Glacier
1847	cut.MaterialVariant = "2022 Stud"
1848	cut.Anchored = true; cut.Parent = workspace
1849	table.insert(angBoxes, cut)
1850	end
1851	do
1852	local edgeDir = -1rightV + 0upV
1853	local edgePerp = 0rightV + -1upV
1854	local cut = Instance.new("Part")
1855	cut.Size = Vector3.new(0.9, 0.28, 0.9)
1856	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.45 * edgePerp, edgeDir, normalV)
1857	cut.BrickColor = BrickColor.new("Nougat")
1858	cut.Material = Enum.Material.Glacier
1859	cut.MaterialVariant = "2022 Stud"
1860	cut.Anchored = true; cut.Parent = workspace
1861	table.insert(angBoxes, cut)
1862	end
1863	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1864	if #cuts > 0 then
1865	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1866	for _, c in ipairs(cuts) do c:Destroy() end
1867	if ok and result then
1868	cyl:Destroy()
1869	result.Name = "RackCrateB1_H_pos"; result.Anchored = true; result.Parent = model
1870	else
1871	cyl.Name = "RackCrateB1_H_pos"; cyl.Parent = model
1872	end
1873	else
1874	cyl.Name = "RackCrateB1_H_pos"; cyl.Parent = model
1875	end
1876	end
1877	do
1878	local rightV = Vector3.new(0,-1,0).Unit
1879	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1880	local normalV = upV:Cross(rightV)
1881	local pos = Vector3.new(-3, 3.35, -11.25)
1882	local cyl = Instance.new("Part")
1883	cyl.Shape = Enum.PartType.Cylinder
1884	cyl.Size = Vector3.new(0.08, 0.45, 0.45)
1885	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1886	cyl.BrickColor = BrickColor.new("Nougat")
1887	cyl.Material = Enum.Material.Glacier
1888	cyl.MaterialVariant = "2022 Stud"
1889	cyl.Anchored = true; cyl.Parent = workspace
1890	local cuts = {}
1891	local hole = Instance.new("Part")
1892	hole.Shape = Enum.PartType.Cylinder
1893	hole.Size = Vector3.new(0.28, 0.3, 0.3)
1894	hole.CFrame = cyl.CFrame
1895	hole.BrickColor = BrickColor.new("Nougat")
1896	hole.Material = Enum.Material.Glacier
1897	hole.MaterialVariant = "2022 Stud"
1898	hole.Anchored = true; hole.Parent = workspace
1899	table.insert(cuts, hole)
1900	local angBoxes = {}
1901	do
1902	local edgeDir = 1rightV + 0upV
1903	local edgePerp = 0rightV + 1upV
1904	local cut = Instance.new("Part")
1905	cut.Size = Vector3.new(0.9, 0.28, 0.9)
1906	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.45 * edgePerp, edgeDir, normalV)
1907	cut.BrickColor = BrickColor.new("Nougat")
1908	cut.Material = Enum.Material.Glacier
1909	cut.MaterialVariant = "2022 Stud"
1910	cut.Anchored = true; cut.Parent = workspace
1911	table.insert(angBoxes, cut)
1912	end
1913	do
1914	local edgeDir = -1rightV + 0upV
1915	local edgePerp = 0rightV + -1upV
1916	local cut = Instance.new("Part")
1917	cut.Size = Vector3.new(0.9, 0.28, 0.9)
1918	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.45 * edgePerp, edgeDir, normalV)
1919	cut.BrickColor = BrickColor.new("Nougat")
1920	cut.Material = Enum.Material.Glacier
1921	cut.MaterialVariant = "2022 Stud"
1922	cut.Anchored = true; cut.Parent = workspace
1923	table.insert(angBoxes, cut)
1924	end
1925	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1926	if #cuts > 0 then
1927	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1928	for _, c in ipairs(cuts) do c:Destroy() end
1929	if ok and result then
1930	cyl:Destroy()
1931	result.Name = "RackCrateB1_H_neg"; result.Anchored = true; result.Parent = model
1932	else
1933	cyl.Name = "RackCrateB1_H_neg"; cyl.Parent = model
1934	end
1935	else
1936	cyl.Name = "RackCrateB1_H_neg"; cyl.Parent = model
1937	end
1938	end
1939	do
1940	local rightV = Vector3.new(0,-1,0).Unit
1941	local upV = (Vector3.new(0,0,1) - Vector3.new(0,0,1):Dot(rightV)*rightV).Unit
1942	local normalV = upV:Cross(rightV)
1943	local pos = Vector3.new(-0.5, 3.6, -9.5)
1944	local cyl = Instance.new("Part")
1945	cyl.Shape = Enum.PartType.Cylinder
1946	cyl.Size = Vector3.new(0.08, 0.6, 0.6)
1947	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1948	cyl.BrickColor = BrickColor.new("Nougat")
1949	cyl.Material = Enum.Material.Glacier
1950	cyl.MaterialVariant = "2022 Stud"
1951	cyl.Anchored = true; cyl.Parent = workspace
1952	local cuts = {}
1953	local hole = Instance.new("Part")
1954	hole.Shape = Enum.PartType.Cylinder
1955	hole.Size = Vector3.new(0.28, 0.4, 0.4)
1956	hole.CFrame = cyl.CFrame
1957	hole.BrickColor = BrickColor.new("Nougat")
1958	hole.Material = Enum.Material.Glacier
1959	hole.MaterialVariant = "2022 Stud"
1960	hole.Anchored = true; hole.Parent = workspace
1961	table.insert(cuts, hole)
1962	local angBoxes = {}
1963	do
1964	local edgeDir = 1rightV + 0upV
1965	local edgePerp = 0rightV + 1upV
1966	local cut = Instance.new("Part")
1967	cut.Size = Vector3.new(1.2, 0.28, 1.2)
1968	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.6 * edgePerp, edgeDir, normalV)
1969	cut.BrickColor = BrickColor.new("Nougat")
1970	cut.Material = Enum.Material.Glacier
1971	cut.MaterialVariant = "2022 Stud"
1972	cut.Anchored = true; cut.Parent = workspace
1973	table.insert(angBoxes, cut)
1974	end
1975	do
1976	local edgeDir = -1rightV + 0upV
1977	local edgePerp = 0rightV + -1upV
1978	local cut = Instance.new("Part")
1979	cut.Size = Vector3.new(1.2, 0.28, 1.2)
1980	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.6 * edgePerp, edgeDir, normalV)
1981	cut.BrickColor = BrickColor.new("Nougat")
1982	cut.Material = Enum.Material.Glacier
1983	cut.MaterialVariant = "2022 Stud"
1984	cut.Anchored = true; cut.Parent = workspace
1985	table.insert(angBoxes, cut)
1986	end
1987	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1988	if #cuts > 0 then
1989	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1990	for _, c in ipairs(cuts) do c:Destroy() end
1991	if ok and result then
1992	cyl:Destroy()
1993	result.Name = "RackCrateB2_H_pos"; result.Anchored = true; result.Parent = model
1994	else
1995	cyl.Name = "RackCrateB2_H_pos"; cyl.Parent = model
1996	end
1997	else
1998	cyl.Name = "RackCrateB2_H_pos"; cyl.Parent = model
1999	end
2000	end
2001	do
2002	local rightV = Vector3.new(0,-1,0).Unit
2003	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2004	local normalV = upV:Cross(rightV)
2005	local pos = Vector3.new(-0.5, 3.6, -11.5)
2006	local cyl = Instance.new("Part")
2007	cyl.Shape = Enum.PartType.Cylinder
2008	cyl.Size = Vector3.new(0.08, 0.6, 0.6)
2009	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2010	cyl.BrickColor = BrickColor.new("Nougat")
2011	cyl.Material = Enum.Material.Glacier
2012	cyl.MaterialVariant = "2022 Stud"
2013	cyl.Anchored = true; cyl.Parent = workspace
2014	local cuts = {}
2015	local hole = Instance.new("Part")
2016	hole.Shape = Enum.PartType.Cylinder
2017	hole.Size = Vector3.new(0.28, 0.4, 0.4)
2018	hole.CFrame = cyl.CFrame
2019	hole.BrickColor = BrickColor.new("Nougat")
2020	hole.Material = Enum.Material.Glacier
2021	hole.MaterialVariant = "2022 Stud"
2022	hole.Anchored = true; hole.Parent = workspace
2023	table.insert(cuts, hole)
2024	local angBoxes = {}
2025	do
2026	local edgeDir = 1rightV + 0upV
2027	local edgePerp = 0rightV + 1upV
2028	local cut = Instance.new("Part")
2029	cut.Size = Vector3.new(1.2, 0.28, 1.2)
2030	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.6 * edgePerp, edgeDir, normalV)
2031	cut.BrickColor = BrickColor.new("Nougat")
2032	cut.Material = Enum.Material.Glacier
2033	cut.MaterialVariant = "2022 Stud"
2034	cut.Anchored = true; cut.Parent = workspace
2035	table.insert(angBoxes, cut)
2036	end
2037	do
2038	local edgeDir = -1rightV + 0upV
2039	local edgePerp = 0rightV + -1upV
2040	local cut = Instance.new("Part")
2041	cut.Size = Vector3.new(1.2, 0.28, 1.2)
2042	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.6 * edgePerp, edgeDir, normalV)
2043	cut.BrickColor = BrickColor.new("Nougat")
2044	cut.Material = Enum.Material.Glacier
2045	cut.MaterialVariant = "2022 Stud"
2046	cut.Anchored = true; cut.Parent = workspace
2047	table.insert(angBoxes, cut)
2048	end
2049	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2050	if #cuts > 0 then
2051	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2052	for _, c in ipairs(cuts) do c:Destroy() end
2053	if ok and result then
2054	cyl:Destroy()
2055	result.Name = "RackCrateB2_H_neg"; result.Anchored = true; result.Parent = model
2056	else
2057	cyl.Name = "RackCrateB2_H_neg"; cyl.Parent = model
2058	end
2059	else
2060	cyl.Name = "RackCrateB2_H_neg"; cyl.Parent = model
2061	end
2062	end
2063	do
2064	local rightV = Vector3.new(0,-1,0).Unit
2065	local upV = (Vector3.new(0,0,1) - Vector3.new(0,0,1):Dot(rightV)*rightV).Unit
2066	local normalV = upV:Cross(rightV)
2067	local pos = Vector3.new(2.5, 4, -9.06)
2068	local cyl = Instance.new("Part")
2069	cyl.Shape = Enum.PartType.Cylinder
2070	cyl.Size = Vector3.new(0.08, 0.84, 0.84)
2071	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2072	cyl.BrickColor = BrickColor.new("Nougat")
2073	cyl.Material = Enum.Material.Glacier
2074	cyl.MaterialVariant = "2022 Stud"
2075	cyl.Anchored = true; cyl.Parent = workspace
2076	local cuts = {}
2077	local hole = Instance.new("Part")
2078	hole.Shape = Enum.PartType.Cylinder
2079	hole.Size = Vector3.new(0.28, 0.56, 0.56)
2080	hole.CFrame = cyl.CFrame
2081	hole.BrickColor = BrickColor.new("Nougat")
2082	hole.Material = Enum.Material.Glacier
2083	hole.MaterialVariant = "2022 Stud"
2084	hole.Anchored = true; hole.Parent = workspace
2085	table.insert(cuts, hole)
2086	local angBoxes = {}
2087	do
2088	local edgeDir = 1rightV + 0upV
2089	local edgePerp = 0rightV + 1upV
2090	local cut = Instance.new("Part")
2091	cut.Size = Vector3.new(1.68, 0.28, 1.68)
2092	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.84 * edgePerp, edgeDir, normalV)
2093	cut.BrickColor = BrickColor.new("Nougat")
2094	cut.Material = Enum.Material.Glacier
2095	cut.MaterialVariant = "2022 Stud"
2096	cut.Anchored = true; cut.Parent = workspace
2097	table.insert(angBoxes, cut)
2098	end
2099	do
2100	local edgeDir = -1rightV + 0upV
2101	local edgePerp = 0rightV + -1upV
2102	local cut = Instance.new("Part")
2103	cut.Size = Vector3.new(1.68, 0.28, 1.68)
2104	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.84 * edgePerp, edgeDir, normalV)
2105	cut.BrickColor = BrickColor.new("Nougat")
2106	cut.Material = Enum.Material.Glacier
2107	cut.MaterialVariant = "2022 Stud"
2108	cut.Anchored = true; cut.Parent = workspace
2109	table.insert(angBoxes, cut)
2110	end
2111	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2112	if #cuts > 0 then
2113	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2114	for _, c in ipairs(cuts) do c:Destroy() end
2115	if ok and result then
2116	cyl:Destroy()
2117	result.Name = "RackCrateB3_H_pos"; result.Anchored = true; result.Parent = model
2118	else
2119	cyl.Name = "RackCrateB3_H_pos"; cyl.Parent = model
2120	end
2121	else
2122	cyl.Name = "RackCrateB3_H_pos"; cyl.Parent = model
2123	end
2124	end
2125	do
2126	local rightV = Vector3.new(0,-1,0).Unit
2127	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2128	local normalV = upV:Cross(rightV)
2129	local pos = Vector3.new(2.5, 4, -12.1)
2130	local cyl = Instance.new("Part")
2131	cyl.Shape = Enum.PartType.Cylinder
2132	cyl.Size = Vector3.new(0.08, 0.84, 0.84)
2133	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2134	cyl.BrickColor = BrickColor.new("Nougat")
2135	cyl.Material = Enum.Material.Glacier
2136	cyl.MaterialVariant = "2022 Stud"
2137	cyl.Anchored = true; cyl.Parent = workspace
2138	local cuts = {}
2139	local hole = Instance.new("Part")
2140	hole.Shape = Enum.PartType.Cylinder
2141	hole.Size = Vector3.new(0.28, 0.56, 0.56)
2142	hole.CFrame = cyl.CFrame
2143	hole.BrickColor = BrickColor.new("Nougat")
2144	hole.Material = Enum.Material.Glacier
2145	hole.MaterialVariant = "2022 Stud"
2146	hole.Anchored = true; hole.Parent = workspace
2147	table.insert(cuts, hole)
2148	local angBoxes = {}
2149	do
2150	local edgeDir = 1rightV + 0upV
2151	local edgePerp = 0rightV + 1upV
2152	local cut = Instance.new("Part")
2153	cut.Size = Vector3.new(1.68, 0.28, 1.68)
2154	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.84 * edgePerp, edgeDir, normalV)
2155	cut.BrickColor = BrickColor.new("Nougat")
2156	cut.Material = Enum.Material.Glacier
2157	cut.MaterialVariant = "2022 Stud"
2158	cut.Anchored = true; cut.Parent = workspace
2159	table.insert(angBoxes, cut)
2160	end
2161	do
2162	local edgeDir = -1rightV + 0upV
2163	local edgePerp = 0rightV + -1upV
2164	local cut = Instance.new("Part")
2165	cut.Size = Vector3.new(1.68, 0.28, 1.68)
2166	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.84 * edgePerp, edgeDir, normalV)
2167	cut.BrickColor = BrickColor.new("Nougat")
2168	cut.Material = Enum.Material.Glacier
2169	cut.MaterialVariant = "2022 Stud"
2170	cut.Anchored = true; cut.Parent = workspace
2171	table.insert(angBoxes, cut)
2172	end
2173	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2174	if #cuts > 0 then
2175	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2176	for _, c in ipairs(cuts) do c:Destroy() end
2177	if ok and result then
2178	cyl:Destroy()
2179	result.Name = "RackCrateB3_H_neg"; result.Anchored = true; result.Parent = model
2180	else
2181	cyl.Name = "RackCrateB3_H_neg"; cyl.Parent = model
2182	end
2183	else
2184	cyl.Name = "RackCrateB3_H_neg"; cyl.Parent = model
2185	end
2186	end
2187	do
2188	local rightV = Vector3.new(0,-1,0).Unit
2189	local upV = (Vector3.new(0,0,1) - Vector3.new(0,0,1):Dot(rightV)*rightV).Unit
2190	local normalV = upV:Cross(rightV)
2191	local pos = Vector3.new(-3.5, 4.6, -10.5)
2192	local cyl = Instance.new("Part")
2193	cyl.Shape = Enum.PartType.Cylinder
2194	cyl.Size = Vector3.new(0.08, 0.3, 0.3)
2195	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2196	cyl.BrickColor = BrickColor.new("Nougat")
2197	cyl.Material = Enum.Material.Glacier
2198	cyl.MaterialVariant = "2022 Stud"
2199	cyl.Anchored = true; cyl.Parent = workspace
2200	local cuts = {}
2201	local hole = Instance.new("Part")
2202	hole.Shape = Enum.PartType.Cylinder
2203	hole.Size = Vector3.new(0.28, 0.2, 0.2)
2204	hole.CFrame = cyl.CFrame
2205	hole.BrickColor = BrickColor.new("Nougat")
2206	hole.Material = Enum.Material.Glacier
2207	hole.MaterialVariant = "2022 Stud"
2208	hole.Anchored = true; hole.Parent = workspace
2209	table.insert(cuts, hole)
2210	local angBoxes = {}
2211	do
2212	local edgeDir = 1rightV + 0upV
2213	local edgePerp = 0rightV + 1upV
2214	local cut = Instance.new("Part")
2215	cut.Size = Vector3.new(0.6, 0.28, 0.6)
2216	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.3 * edgePerp, edgeDir, normalV)
2217	cut.BrickColor = BrickColor.new("Nougat")
2218	cut.Material = Enum.Material.Glacier
2219	cut.MaterialVariant = "2022 Stud"
2220	cut.Anchored = true; cut.Parent = workspace
2221	table.insert(angBoxes, cut)
2222	end
2223	do
2224	local edgeDir = -1rightV + 0upV
2225	local edgePerp = 0rightV + -1upV
2226	local cut = Instance.new("Part")
2227	cut.Size = Vector3.new(0.6, 0.28, 0.6)
2228	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.3 * edgePerp, edgeDir, normalV)
2229	cut.BrickColor = BrickColor.new("Nougat")
2230	cut.Material = Enum.Material.Glacier
2231	cut.MaterialVariant = "2022 Stud"
2232	cut.Anchored = true; cut.Parent = workspace
2233	table.insert(angBoxes, cut)
2234	end
2235	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2236	if #cuts > 0 then
2237	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2238	for _, c in ipairs(cuts) do c:Destroy() end
2239	if ok and result then
2240	cyl:Destroy()
2241	result.Name = "RackCrateT1_H_pos"; result.Anchored = true; result.Parent = model
2242	else
2243	cyl.Name = "RackCrateT1_H_pos"; cyl.Parent = model
2244	end
2245	else
2246	cyl.Name = "RackCrateT1_H_pos"; cyl.Parent = model
2247	end
2248	end
2249	do
2250	local rightV = Vector3.new(0,-1,0).Unit
2251	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2252	local normalV = upV:Cross(rightV)
2253	local pos = Vector3.new(-3.5, 4.6, -11.5)
2254	local cyl = Instance.new("Part")
2255	cyl.Shape = Enum.PartType.Cylinder
2256	cyl.Size = Vector3.new(0.08, 0.3, 0.3)
2257	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2258	cyl.BrickColor = BrickColor.new("Nougat")
2259	cyl.Material = Enum.Material.Glacier
2260	cyl.MaterialVariant = "2022 Stud"
2261	cyl.Anchored = true; cyl.Parent = workspace
2262	local cuts = {}
2263	local hole = Instance.new("Part")
2264	hole.Shape = Enum.PartType.Cylinder
2265	hole.Size = Vector3.new(0.28, 0.2, 0.2)
2266	hole.CFrame = cyl.CFrame
2267	hole.BrickColor = BrickColor.new("Nougat")
2268	hole.Material = Enum.Material.Glacier
2269	hole.MaterialVariant = "2022 Stud"
2270	hole.Anchored = true; hole.Parent = workspace
2271	table.insert(cuts, hole)
2272	local angBoxes = {}
2273	do
2274	local edgeDir = 1rightV + 0upV
2275	local edgePerp = 0rightV + 1upV
2276	local cut = Instance.new("Part")
2277	cut.Size = Vector3.new(0.6, 0.28, 0.6)
2278	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.3 * edgePerp, edgeDir, normalV)
2279	cut.BrickColor = BrickColor.new("Nougat")
2280	cut.Material = Enum.Material.Glacier
2281	cut.MaterialVariant = "2022 Stud"
2282	cut.Anchored = true; cut.Parent = workspace
2283	table.insert(angBoxes, cut)
2284	end
2285	do
2286	local edgeDir = -1rightV + 0upV
2287	local edgePerp = 0rightV + -1upV
2288	local cut = Instance.new("Part")
2289	cut.Size = Vector3.new(0.6, 0.28, 0.6)
2290	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.3 * edgePerp, edgeDir, normalV)
2291	cut.BrickColor = BrickColor.new("Nougat")
2292	cut.Material = Enum.Material.Glacier
2293	cut.MaterialVariant = "2022 Stud"
2294	cut.Anchored = true; cut.Parent = workspace
2295	table.insert(angBoxes, cut)
2296	end
2297	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2298	if #cuts > 0 then
2299	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2300	for _, c in ipairs(cuts) do c:Destroy() end
2301	if ok and result then
2302	cyl:Destroy()
2303	result.Name = "RackCrateT1_H_neg"; result.Anchored = true; result.Parent = model
2304	else
2305	cyl.Name = "RackCrateT1_H_neg"; cyl.Parent = model
2306	end
2307	else
2308	cyl.Name = "RackCrateT1_H_neg"; cyl.Parent = model
2309	end
2310	end
2311	do
2312	local rightV = Vector3.new(0,-1,0).Unit
2313	local upV = (Vector3.new(0,0,1) - Vector3.new(0,0,1):Dot(rightV)*rightV).Unit
2314	local normalV = upV:Cross(rightV)
2315	local pos = Vector3.new(-2, 4.7, -10.4)
2316	local cyl = Instance.new("Part")
2317	cyl.Shape = Enum.PartType.Cylinder
2318	cyl.Size = Vector3.new(0.08, 0.36, 0.36)
2319	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2320	cyl.BrickColor = BrickColor.new("Nougat")
2321	cyl.Material = Enum.Material.Glacier
2322	cyl.MaterialVariant = "2022 Stud"
2323	cyl.Anchored = true; cyl.Parent = workspace
2324	local cuts = {}
2325	local hole = Instance.new("Part")
2326	hole.Shape = Enum.PartType.Cylinder
2327	hole.Size = Vector3.new(0.28, 0.24, 0.24)
2328	hole.CFrame = cyl.CFrame
2329	hole.BrickColor = BrickColor.new("Nougat")
2330	hole.Material = Enum.Material.Glacier
2331	hole.MaterialVariant = "2022 Stud"
2332	hole.Anchored = true; hole.Parent = workspace
2333	table.insert(cuts, hole)
2334	local angBoxes = {}
2335	do
2336	local edgeDir = 1rightV + 0upV
2337	local edgePerp = 0rightV + 1upV
2338	local cut = Instance.new("Part")
2339	cut.Size = Vector3.new(0.72, 0.28, 0.72)
2340	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.36 * edgePerp, edgeDir, normalV)
2341	cut.BrickColor = BrickColor.new("Nougat")
2342	cut.Material = Enum.Material.Glacier
2343	cut.MaterialVariant = "2022 Stud"
2344	cut.Anchored = true; cut.Parent = workspace
2345	table.insert(angBoxes, cut)
2346	end
2347	do
2348	local edgeDir = -1rightV + 0upV
2349	local edgePerp = 0rightV + -1upV
2350	local cut = Instance.new("Part")
2351	cut.Size = Vector3.new(0.72, 0.28, 0.72)
2352	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.36 * edgePerp, edgeDir, normalV)
2353	cut.BrickColor = BrickColor.new("Nougat")
2354	cut.Material = Enum.Material.Glacier
2355	cut.MaterialVariant = "2022 Stud"
2356	cut.Anchored = true; cut.Parent = workspace
2357	table.insert(angBoxes, cut)
2358	end
2359	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2360	if #cuts > 0 then
2361	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2362	for _, c in ipairs(cuts) do c:Destroy() end
2363	if ok and result then
2364	cyl:Destroy()
2365	result.Name = "RackCrateT2_H_pos"; result.Anchored = true; result.Parent = model
2366	else
2367	cyl.Name = "RackCrateT2_H_pos"; cyl.Parent = model
2368	end
2369	else
2370	cyl.Name = "RackCrateT2_H_pos"; cyl.Parent = model
2371	end
2372	end
2373	do
2374	local rightV = Vector3.new(0,-1,0).Unit
2375	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2376	local normalV = upV:Cross(rightV)
2377	local pos = Vector3.new(-2, 4.7, -11.6)
2378	local cyl = Instance.new("Part")
2379	cyl.Shape = Enum.PartType.Cylinder
2380	cyl.Size = Vector3.new(0.08, 0.36, 0.36)
2381	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2382	cyl.BrickColor = BrickColor.new("Nougat")
2383	cyl.Material = Enum.Material.Glacier
2384	cyl.MaterialVariant = "2022 Stud"
2385	cyl.Anchored = true; cyl.Parent = workspace
2386	local cuts = {}
2387	local hole = Instance.new("Part")
2388	hole.Shape = Enum.PartType.Cylinder
2389	hole.Size = Vector3.new(0.28, 0.24, 0.24)
2390	hole.CFrame = cyl.CFrame
2391	hole.BrickColor = BrickColor.new("Nougat")
2392	hole.Material = Enum.Material.Glacier
2393	hole.MaterialVariant = "2022 Stud"
2394	hole.Anchored = true; hole.Parent = workspace
2395	table.insert(cuts, hole)
2396	local angBoxes = {}
2397	do
2398	local edgeDir = 1rightV + 0upV
2399	local edgePerp = 0rightV + 1upV
2400	local cut = Instance.new("Part")
2401	cut.Size = Vector3.new(0.72, 0.28, 0.72)
2402	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.36 * edgePerp, edgeDir, normalV)
2403	cut.BrickColor = BrickColor.new("Nougat")
2404	cut.Material = Enum.Material.Glacier
2405	cut.MaterialVariant = "2022 Stud"
2406	cut.Anchored = true; cut.Parent = workspace
2407	table.insert(angBoxes, cut)
2408	end
2409	do
2410	local edgeDir = -1rightV + 0upV
2411	local edgePerp = 0rightV + -1upV
2412	local cut = Instance.new("Part")
2413	cut.Size = Vector3.new(0.72, 0.28, 0.72)
2414	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.36 * edgePerp, edgeDir, normalV)
2415	cut.BrickColor = BrickColor.new("Nougat")
2416	cut.Material = Enum.Material.Glacier
2417	cut.MaterialVariant = "2022 Stud"
2418	cut.Anchored = true; cut.Parent = workspace
2419	table.insert(angBoxes, cut)
2420	end
2421	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2422	if #cuts > 0 then
2423	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2424	for _, c in ipairs(cuts) do c:Destroy() end
2425	if ok and result then
2426	cyl:Destroy()
2427	result.Name = "RackCrateT2_H_neg"; result.Anchored = true; result.Parent = model
2428	else
2429	cyl.Name = "RackCrateT2_H_neg"; cyl.Parent = model
2430	end
2431	else
2432	cyl.Name = "RackCrateT2_H_neg"; cyl.Parent = model
2433	end
2434	end
2435	do
2436	local rightV = Vector3.new(0,-1,0).Unit
2437	local upV = (Vector3.new(0,0,1) - Vector3.new(0,0,1):Dot(rightV)*rightV).Unit
2438	local normalV = upV:Cross(rightV)
2439	local pos = Vector3.new(-0.2, 4.85, -10.25)
2440	local cyl = Instance.new("Part")
2441	cyl.Shape = Enum.PartType.Cylinder
2442	cyl.Size = Vector3.new(0.08, 0.45, 0.45)
2443	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2444	cyl.BrickColor = BrickColor.new("Nougat")
2445	cyl.Material = Enum.Material.Glacier
2446	cyl.MaterialVariant = "2022 Stud"
2447	cyl.Anchored = true; cyl.Parent = workspace
2448	local cuts = {}
2449	local hole = Instance.new("Part")
2450	hole.Shape = Enum.PartType.Cylinder
2451	hole.Size = Vector3.new(0.28, 0.3, 0.3)
2452	hole.CFrame = cyl.CFrame
2453	hole.BrickColor = BrickColor.new("Nougat")
2454	hole.Material = Enum.Material.Glacier
2455	hole.MaterialVariant = "2022 Stud"
2456	hole.Anchored = true; hole.Parent = workspace
2457	table.insert(cuts, hole)
2458	local angBoxes = {}
2459	do
2460	local edgeDir = 1rightV + 0upV
2461	local edgePerp = 0rightV + 1upV
2462	local cut = Instance.new("Part")
2463	cut.Size = Vector3.new(0.9, 0.28, 0.9)
2464	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.45 * edgePerp, edgeDir, normalV)
2465	cut.BrickColor = BrickColor.new("Nougat")
2466	cut.Material = Enum.Material.Glacier
2467	cut.MaterialVariant = "2022 Stud"
2468	cut.Anchored = true; cut.Parent = workspace
2469	table.insert(angBoxes, cut)
2470	end
2471	do
2472	local edgeDir = -1rightV + 0upV
2473	local edgePerp = 0rightV + -1upV
2474	local cut = Instance.new("Part")
2475	cut.Size = Vector3.new(0.9, 0.28, 0.9)
2476	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.45 * edgePerp, edgeDir, normalV)
2477	cut.BrickColor = BrickColor.new("Nougat")
2478	cut.Material = Enum.Material.Glacier
2479	cut.MaterialVariant = "2022 Stud"
2480	cut.Anchored = true; cut.Parent = workspace
2481	table.insert(angBoxes, cut)
2482	end
2483	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2484	if #cuts > 0 then
2485	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2486	for _, c in ipairs(cuts) do c:Destroy() end
2487	if ok and result then
2488	cyl:Destroy()
2489	result.Name = "RackCrateT3_H_pos"; result.Anchored = true; result.Parent = model
2490	else
2491	cyl.Name = "RackCrateT3_H_pos"; cyl.Parent = model
2492	end
2493	else
2494	cyl.Name = "RackCrateT3_H_pos"; cyl.Parent = model
2495	end
2496	end
2497	do
2498	local rightV = Vector3.new(0,-1,0).Unit
2499	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2500	local normalV = upV:Cross(rightV)
2501	local pos = Vector3.new(-0.2, 4.85, -11.75)
2502	local cyl = Instance.new("Part")
2503	cyl.Shape = Enum.PartType.Cylinder
2504	cyl.Size = Vector3.new(0.08, 0.45, 0.45)
2505	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2506	cyl.BrickColor = BrickColor.new("Nougat")
2507	cyl.Material = Enum.Material.Glacier
2508	cyl.MaterialVariant = "2022 Stud"
2509	cyl.Anchored = true; cyl.Parent = workspace
2510	local cuts = {}
2511	local hole = Instance.new("Part")
2512	hole.Shape = Enum.PartType.Cylinder
2513	hole.Size = Vector3.new(0.28, 0.3, 0.3)
2514	hole.CFrame = cyl.CFrame
2515	hole.BrickColor = BrickColor.new("Nougat")
2516	hole.Material = Enum.Material.Glacier
2517	hole.MaterialVariant = "2022 Stud"
2518	hole.Anchored = true; hole.Parent = workspace
2519	table.insert(cuts, hole)
2520	local angBoxes = {}
2521	do
2522	local edgeDir = 1rightV + 0upV
2523	local edgePerp = 0rightV + 1upV
2524	local cut = Instance.new("Part")
2525	cut.Size = Vector3.new(0.9, 0.28, 0.9)
2526	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.45 * edgePerp, edgeDir, normalV)
2527	cut.BrickColor = BrickColor.new("Nougat")
2528	cut.Material = Enum.Material.Glacier
2529	cut.MaterialVariant = "2022 Stud"
2530	cut.Anchored = true; cut.Parent = workspace
2531	table.insert(angBoxes, cut)
2532	end
2533	do
2534	local edgeDir = -1rightV + 0upV
2535	local edgePerp = 0rightV + -1upV
2536	local cut = Instance.new("Part")
2537	cut.Size = Vector3.new(0.9, 0.28, 0.9)
2538	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.45 * edgePerp, edgeDir, normalV)
2539	cut.BrickColor = BrickColor.new("Nougat")
2540	cut.Material = Enum.Material.Glacier
2541	cut.MaterialVariant = "2022 Stud"
2542	cut.Anchored = true; cut.Parent = workspace
2543	table.insert(angBoxes, cut)
2544	end
2545	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2546	if #cuts > 0 then
2547	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2548	for _, c in ipairs(cuts) do c:Destroy() end
2549	if ok and result then
2550	cyl:Destroy()
2551	result.Name = "RackCrateT3_H_neg"; result.Anchored = true; result.Parent = model
2552	else
2553	cyl.Name = "RackCrateT3_H_neg"; cyl.Parent = model
2554	end
2555	else
2556	cyl.Name = "RackCrateT3_H_neg"; cyl.Parent = model
2557	end
2558	end
2559	do
2560	local rightV = Vector3.new(0,-1,0).Unit
2561	local upV = (Vector3.new(0,0,1) - Vector3.new(0,0,1):Dot(rightV)*rightV).Unit
2562	local normalV = upV:Cross(rightV)
2563	local pos = Vector3.new(2, 5.1, -10)
2564	local cyl = Instance.new("Part")
2565	cyl.Shape = Enum.PartType.Cylinder
2566	cyl.Size = Vector3.new(0.08, 0.6, 0.6)
2567	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2568	cyl.BrickColor = BrickColor.new("Nougat")
2569	cyl.Material = Enum.Material.Glacier
2570	cyl.MaterialVariant = "2022 Stud"
2571	cyl.Anchored = true; cyl.Parent = workspace
2572	local cuts = {}
2573	local hole = Instance.new("Part")
2574	hole.Shape = Enum.PartType.Cylinder
2575	hole.Size = Vector3.new(0.28, 0.4, 0.4)
2576	hole.CFrame = cyl.CFrame
2577	hole.BrickColor = BrickColor.new("Nougat")
2578	hole.Material = Enum.Material.Glacier
2579	hole.MaterialVariant = "2022 Stud"
2580	hole.Anchored = true; hole.Parent = workspace
2581	table.insert(cuts, hole)
2582	local angBoxes = {}
2583	do
2584	local edgeDir = 1rightV + 0upV
2585	local edgePerp = 0rightV + 1upV
2586	local cut = Instance.new("Part")
2587	cut.Size = Vector3.new(1.2, 0.28, 1.2)
2588	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.6 * edgePerp, edgeDir, normalV)
2589	cut.BrickColor = BrickColor.new("Nougat")
2590	cut.Material = Enum.Material.Glacier
2591	cut.MaterialVariant = "2022 Stud"
2592	cut.Anchored = true; cut.Parent = workspace
2593	table.insert(angBoxes, cut)
2594	end
2595	do
2596	local edgeDir = -1rightV + 0upV
2597	local edgePerp = 0rightV + -1upV
2598	local cut = Instance.new("Part")
2599	cut.Size = Vector3.new(1.2, 0.28, 1.2)
2600	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.6 * edgePerp, edgeDir, normalV)
2601	cut.BrickColor = BrickColor.new("Nougat")
2602	cut.Material = Enum.Material.Glacier
2603	cut.MaterialVariant = "2022 Stud"
2604	cut.Anchored = true; cut.Parent = workspace
2605	table.insert(angBoxes, cut)
2606	end
2607	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2608	if #cuts > 0 then
2609	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2610	for _, c in ipairs(cuts) do c:Destroy() end
2611	if ok and result then
2612	cyl:Destroy()
2613	result.Name = "RackCrateT4_H_pos"; result.Anchored = true; result.Parent = model
2614	else
2615	cyl.Name = "RackCrateT4_H_pos"; cyl.Parent = model
2616	end
2617	else
2618	cyl.Name = "RackCrateT4_H_pos"; cyl.Parent = model
2619	end
2620	end
2621	do
2622	local rightV = Vector3.new(0,-1,0).Unit
2623	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2624	local normalV = upV:Cross(rightV)
2625	local pos = Vector3.new(2, 5.1, -12)
2626	local cyl = Instance.new("Part")
2627	cyl.Shape = Enum.PartType.Cylinder
2628	cyl.Size = Vector3.new(0.08, 0.6, 0.6)
2629	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2630	cyl.BrickColor = BrickColor.new("Nougat")
2631	cyl.Material = Enum.Material.Glacier
2632	cyl.MaterialVariant = "2022 Stud"
2633	cyl.Anchored = true; cyl.Parent = workspace
2634	local cuts = {}
2635	local hole = Instance.new("Part")
2636	hole.Shape = Enum.PartType.Cylinder
2637	hole.Size = Vector3.new(0.28, 0.4, 0.4)
2638	hole.CFrame = cyl.CFrame
2639	hole.BrickColor = BrickColor.new("Nougat")
2640	hole.Material = Enum.Material.Glacier
2641	hole.MaterialVariant = "2022 Stud"
2642	hole.Anchored = true; hole.Parent = workspace
2643	table.insert(cuts, hole)
2644	local angBoxes = {}
2645	do
2646	local edgeDir = 1rightV + 0upV
2647	local edgePerp = 0rightV + 1upV
2648	local cut = Instance.new("Part")
2649	cut.Size = Vector3.new(1.2, 0.28, 1.2)
2650	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.6 * edgePerp, edgeDir, normalV)
2651	cut.BrickColor = BrickColor.new("Nougat")
2652	cut.Material = Enum.Material.Glacier
2653	cut.MaterialVariant = "2022 Stud"
2654	cut.Anchored = true; cut.Parent = workspace
2655	table.insert(angBoxes, cut)
2656	end
2657	do
2658	local edgeDir = -1rightV + 0upV
2659	local edgePerp = 0rightV + -1upV
2660	local cut = Instance.new("Part")
2661	cut.Size = Vector3.new(1.2, 0.28, 1.2)
2662	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.6 * edgePerp, edgeDir, normalV)
2663	cut.BrickColor = BrickColor.new("Nougat")
2664	cut.Material = Enum.Material.Glacier
2665	cut.MaterialVariant = "2022 Stud"
2666	cut.Anchored = true; cut.Parent = workspace
2667	table.insert(angBoxes, cut)
2668	end
2669	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2670	if #cuts > 0 then
2671	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2672	for _, c in ipairs(cuts) do c:Destroy() end
2673	if ok and result then
2674	cyl:Destroy()
2675	result.Name = "RackCrateT4_H_neg"; result.Anchored = true; result.Parent = model
2676	else
2677	cyl.Name = "RackCrateT4_H_neg"; cyl.Parent = model
2678	end
2679	else
2680	cyl.Name = "RackCrateT4_H_neg"; cyl.Parent = model
2681	end
2682	end
2683	do
2684	local rightV = Vector3.new(0,-1,0).Unit
2685	local upV = (Vector3.new(0,0,1) - Vector3.new(0,0,1):Dot(rightV)*rightV).Unit
2686	local normalV = upV:Cross(rightV)
2687	local pos = Vector3.new(-7, 1.25, -11.25)
2688	local cyl = Instance.new("Part")
2689	cyl.Shape = Enum.PartType.Cylinder
2690	cyl.Size = Vector3.new(0.08, 0.45, 0.45)
2691	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2692	cyl.BrickColor = BrickColor.new("Nougat")
2693	cyl.Material = Enum.Material.Glacier
2694	cyl.MaterialVariant = "2022 Stud"
2695	cyl.Anchored = true; cyl.Parent = workspace
2696	local cuts = {}
2697	local hole = Instance.new("Part")
2698	hole.Shape = Enum.PartType.Cylinder
2699	hole.Size = Vector3.new(0.28, 0.3, 0.3)
2700	hole.CFrame = cyl.CFrame
2701	hole.BrickColor = BrickColor.new("Nougat")
2702	hole.Material = Enum.Material.Glacier
2703	hole.MaterialVariant = "2022 Stud"
2704	hole.Anchored = true; hole.Parent = workspace
2705	table.insert(cuts, hole)
2706	local angBoxes = {}
2707	do
2708	local edgeDir = 1rightV + 0upV
2709	local edgePerp = 0rightV + 1upV
2710	local cut = Instance.new("Part")
2711	cut.Size = Vector3.new(0.9, 0.28, 0.9)
2712	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.45 * edgePerp, edgeDir, normalV)
2713	cut.BrickColor = BrickColor.new("Nougat")
2714	cut.Material = Enum.Material.Glacier
2715	cut.MaterialVariant = "2022 Stud"
2716	cut.Anchored = true; cut.Parent = workspace
2717	table.insert(angBoxes, cut)
2718	end
2719	do
2720	local edgeDir = -1rightV + 0upV
2721	local edgePerp = 0rightV + -1upV
2722	local cut = Instance.new("Part")
2723	cut.Size = Vector3.new(0.9, 0.28, 0.9)
2724	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.45 * edgePerp, edgeDir, normalV)
2725	cut.BrickColor = BrickColor.new("Nougat")
2726	cut.Material = Enum.Material.Glacier
2727	cut.MaterialVariant = "2022 Stud"
2728	cut.Anchored = true; cut.Parent = workspace
2729	table.insert(angBoxes, cut)
2730	end
2731	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2732	if #cuts > 0 then
2733	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2734	for _, c in ipairs(cuts) do c:Destroy() end
2735	if ok and result then
2736	cyl:Destroy()
2737	result.Name = "FloorCrate1_H_pos"; result.Anchored = true; result.Parent = model
2738	else
2739	cyl.Name = "FloorCrate1_H_pos"; cyl.Parent = model
2740	end
2741	else
2742	cyl.Name = "FloorCrate1_H_pos"; cyl.Parent = model
2743	end
2744	end
2745	do
2746	local rightV = Vector3.new(0,-1,0).Unit
2747	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2748	local normalV = upV:Cross(rightV)
2749	local pos = Vector3.new(-7, 1.25, -12.75)
2750	local cyl = Instance.new("Part")
2751	cyl.Shape = Enum.PartType.Cylinder
2752	cyl.Size = Vector3.new(0.08, 0.45, 0.45)
2753	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2754	cyl.BrickColor = BrickColor.new("Nougat")
2755	cyl.Material = Enum.Material.Glacier
2756	cyl.MaterialVariant = "2022 Stud"
2757	cyl.Anchored = true; cyl.Parent = workspace
2758	local cuts = {}
2759	local hole = Instance.new("Part")
2760	hole.Shape = Enum.PartType.Cylinder
2761	hole.Size = Vector3.new(0.28, 0.3, 0.3)
2762	hole.CFrame = cyl.CFrame
2763	hole.BrickColor = BrickColor.new("Nougat")
2764	hole.Material = Enum.Material.Glacier
2765	hole.MaterialVariant = "2022 Stud"
2766	hole.Anchored = true; hole.Parent = workspace
2767	table.insert(cuts, hole)
2768	local angBoxes = {}
2769	do
2770	local edgeDir = 1rightV + 0upV
2771	local edgePerp = 0rightV + 1upV
2772	local cut = Instance.new("Part")
2773	cut.Size = Vector3.new(0.9, 0.28, 0.9)
2774	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.45 * edgePerp, edgeDir, normalV)
2775	cut.BrickColor = BrickColor.new("Nougat")
2776	cut.Material = Enum.Material.Glacier
2777	cut.MaterialVariant = "2022 Stud"
2778	cut.Anchored = true; cut.Parent = workspace
2779	table.insert(angBoxes, cut)
2780	end
2781	do
2782	local edgeDir = -1rightV + 0upV
2783	local edgePerp = 0rightV + -1upV
2784	local cut = Instance.new("Part")
2785	cut.Size = Vector3.new(0.9, 0.28, 0.9)
2786	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.45 * edgePerp, edgeDir, normalV)
2787	cut.BrickColor = BrickColor.new("Nougat")
2788	cut.Material = Enum.Material.Glacier
2789	cut.MaterialVariant = "2022 Stud"
2790	cut.Anchored = true; cut.Parent = workspace
2791	table.insert(angBoxes, cut)
2792	end
2793	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2794	if #cuts > 0 then
2795	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2796	for _, c in ipairs(cuts) do c:Destroy() end
2797	if ok and result then
2798	cyl:Destroy()
2799	result.Name = "FloorCrate1_H_neg"; result.Anchored = true; result.Parent = model
2800	else
2801	cyl.Name = "FloorCrate1_H_neg"; cyl.Parent = model
2802	end
2803	else
2804	cyl.Name = "FloorCrate1_H_neg"; cyl.Parent = model
2805	end
2806	end
2807	do
2808	local rightV = Vector3.new(0,-1,0).Unit
2809	local upV = (Vector3.new(1,0,0) - Vector3.new(1,0,0):Dot(rightV)*rightV).Unit
2810	local normalV = upV:Cross(rightV)
2811	local pos = Vector3.new(7.5, 1, -13)
2812	local cyl = Instance.new("Part")
2813	cyl.Shape = Enum.PartType.Cylinder
2814	cyl.Size = Vector3.new(0.08, 0.3, 0.3)
2815	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2816	cyl.BrickColor = BrickColor.new("Nougat")
2817	cyl.Material = Enum.Material.Glacier
2818	cyl.MaterialVariant = "2022 Stud"
2819	cyl.Anchored = true; cyl.Parent = workspace
2820	local cuts = {}
2821	local hole = Instance.new("Part")
2822	hole.Shape = Enum.PartType.Cylinder
2823	hole.Size = Vector3.new(0.28, 0.2, 0.2)
2824	hole.CFrame = cyl.CFrame
2825	hole.BrickColor = BrickColor.new("Nougat")
2826	hole.Material = Enum.Material.Glacier
2827	hole.MaterialVariant = "2022 Stud"
2828	hole.Anchored = true; hole.Parent = workspace
2829	table.insert(cuts, hole)
2830	local angBoxes = {}
2831	do
2832	local edgeDir = 1rightV + 0upV
2833	local edgePerp = 0rightV + 1upV
2834	local cut = Instance.new("Part")
2835	cut.Size = Vector3.new(0.6, 0.28, 0.6)
2836	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.3 * edgePerp, edgeDir, normalV)
2837	cut.BrickColor = BrickColor.new("Nougat")
2838	cut.Material = Enum.Material.Glacier
2839	cut.MaterialVariant = "2022 Stud"
2840	cut.Anchored = true; cut.Parent = workspace
2841	table.insert(angBoxes, cut)
2842	end
2843	do
2844	local edgeDir = -1rightV + 0upV
2845	local edgePerp = 0rightV + -1upV
2846	local cut = Instance.new("Part")
2847	cut.Size = Vector3.new(0.6, 0.28, 0.6)
2848	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.3 * edgePerp, edgeDir, normalV)
2849	cut.BrickColor = BrickColor.new("Nougat")
2850	cut.Material = Enum.Material.Glacier
2851	cut.MaterialVariant = "2022 Stud"
2852	cut.Anchored = true; cut.Parent = workspace
2853	table.insert(angBoxes, cut)
2854	end
2855	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2856	if #cuts > 0 then
2857	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2858	for _, c in ipairs(cuts) do c:Destroy() end
2859	if ok and result then
2860	cyl:Destroy()
2861	result.Name = "FloorCrate2_H_pos"; result.Anchored = true; result.Parent = model
2862	else
2863	cyl.Name = "FloorCrate2_H_pos"; cyl.Parent = model
2864	end
2865	else
2866	cyl.Name = "FloorCrate2_H_pos"; cyl.Parent = model
2867	end
2868	end
2869	do
2870	local rightV = Vector3.new(0,-1,0).Unit
2871	local upV = (Vector3.new(-1,0,0) - Vector3.new(-1,0,0):Dot(rightV)*rightV).Unit
2872	local normalV = upV:Cross(rightV)
2873	local pos = Vector3.new(6.5, 1, -13)
2874	local cyl = Instance.new("Part")
2875	cyl.Shape = Enum.PartType.Cylinder
2876	cyl.Size = Vector3.new(0.08, 0.3, 0.3)
2877	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2878	cyl.BrickColor = BrickColor.new("Nougat")
2879	cyl.Material = Enum.Material.Glacier
2880	cyl.MaterialVariant = "2022 Stud"
2881	cyl.Anchored = true; cyl.Parent = workspace
2882	local cuts = {}
2883	local hole = Instance.new("Part")
2884	hole.Shape = Enum.PartType.Cylinder
2885	hole.Size = Vector3.new(0.28, 0.2, 0.2)
2886	hole.CFrame = cyl.CFrame
2887	hole.BrickColor = BrickColor.new("Nougat")
2888	hole.Material = Enum.Material.Glacier
2889	hole.MaterialVariant = "2022 Stud"
2890	hole.Anchored = true; hole.Parent = workspace
2891	table.insert(cuts, hole)
2892	local angBoxes = {}
2893	do
2894	local edgeDir = 1rightV + 0upV
2895	local edgePerp = 0rightV + 1upV
2896	local cut = Instance.new("Part")
2897	cut.Size = Vector3.new(0.6, 0.28, 0.6)
2898	cut.CFrame = CFrame.fromMatrix(pos + -1 * 0.3 * edgePerp, edgeDir, normalV)
2899	cut.BrickColor = BrickColor.new("Nougat")
2900	cut.Material = Enum.Material.Glacier
2901	cut.MaterialVariant = "2022 Stud"
2902	cut.Anchored = true; cut.Parent = workspace
2903	table.insert(angBoxes, cut)
2904	end
2905	do
2906	local edgeDir = -1rightV + 0upV
2907	local edgePerp = 0rightV + -1upV
2908	local cut = Instance.new("Part")
2909	cut.Size = Vector3.new(0.6, 0.28, 0.6)
2910	cut.CFrame = CFrame.fromMatrix(pos + 1 * 0.3 * edgePerp, edgeDir, normalV)
2911	cut.BrickColor = BrickColor.new("Nougat")
2912	cut.Material = Enum.Material.Glacier
2913	cut.MaterialVariant = "2022 Stud"
2914	cut.Anchored = true; cut.Parent = workspace
2915	table.insert(angBoxes, cut)
2916	end
2917	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2918	if #cuts > 0 then
2919	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2920	for _, c in ipairs(cuts) do c:Destroy() end
2921	if ok and result then
2922	cyl:Destroy()
2923	result.Name = "FloorCrate2_H_neg"; result.Anchored = true; result.Parent = model
2924	else
2925	cyl.Name = "FloorCrate2_H_neg"; cyl.Parent = model
2926	end
2927	else
2928	cyl.Name = "FloorCrate2_H_neg"; cyl.Parent = model
2929	end
2930	end
2931	model.PrimaryPart = model:FindFirstChild("Floor")
2932	print("GymCrateWeights built: " .. #model:GetChildren() .. " parts")

Comments

Loading comments...