ExtensionCord

Ultra

by Prime AirGhost · 9/21/2026

Lua Script

Paste this script into the Command Bar to spawn the model

1	-- Generated with StudForge.org \| AI-powered 3D models for Roblox
2	-- Model: ExtensionCord
3
4	-- Generated with StudForge.org \| AI-powered 3D models for Roblox
5	-- Model: ExtensionCord
6
7	local MS = game:GetService("MaterialService")
8
9	local ok, roots = pcall(game.GetObjects, game, "rbxassetid://13386676607")
10	if not ok then return warn(roots) end
11
12	local tmp = Instance.new("Folder")
13	for _, r in ipairs(roots) do r.Parent = tmp end
14
15	for _, d in ipairs(tmp:GetDescendants()) do
16	if d:IsA("MaterialVariant") then
17	d.Parent = MS
18	end
19	end
20	tmp:Destroy()
21
22	local model = Instance.new("Model")
23	model.Name = "ExtensionCord"
24	model.Parent = workspace
25
26	local variants = {
27	["Black"] = "2022 Glue",
28	["Bright orange"] = "2022 Stud",
29	["Really black"] = "2022 Universal",
30	["Silver"] = "2022 Stud",
31	}
32	do
33	local p = Instance.new("Part")
34	p.Shape = Enum.PartType.Cylinder
35	p.Name = "Wrap_0"
36	p.Size = Vector3.new(5.001, 0.72, 0.72)
37	p.CFrame = CFrame.new(0, 3.15, 5.5) * CFrame.Angles(math.rad(0), math.rad(-36.8699), math.rad(1.14576))
38	p.BrickColor = BrickColor.new("Bright orange")
39	p.Material = Enum.Material.Glacier
40	p.MaterialVariant = "2022 Stud"
41	p.Anchored = true
42	p.Parent = model
43	end
44	do
45	local p = Instance.new("Part")
46	p.Shape = Enum.PartType.Cylinder
47	p.Name = "Wrap_1"
48	p.Size = Vector3.new(6.12291, 0.68, 0.68)
49	p.CFrame = CFrame.new(5, 2.85, 6.5) * CFrame.Angles(math.rad(0), math.rad(9.46232), math.rad(-6.56468))
50	p.BrickColor = BrickColor.new("Bright orange")
51	p.Material = Enum.Material.Glacier
52	p.MaterialVariant = "2022 Stud"
53	p.Anchored = true
54	p.Parent = model
55	end
56	do
57	local p = Instance.new("Part")
58	p.Shape = Enum.PartType.Ball
59	p.Name = "WrapJoint_1"
60	p.Size = Vector3.new(0.8, 0.8, 0.8)
61	p.CFrame = CFrame.new(2, 3.2, 7)
62	p.BrickColor = BrickColor.new("Bright orange")
63	p.Material = Enum.Material.Glacier
64	p.MaterialVariant = "2022 Stud"
65	p.Anchored = true
66	p.Parent = model
67	end
68	do
69	local p = Instance.new("Part")
70	p.Shape = Enum.PartType.Cylinder
71	p.Name = "Wrap_2"
72	p.Size = Vector3.new(6.67083, 0.64, 0.64)
73	p.CFrame = CFrame.new(9.25, 1.75, 3) * CFrame.Angles(math.rad(0), math.rad(67.3801), math.rad(-12.9946))
74	p.BrickColor = BrickColor.new("Bright orange")
75	p.Material = Enum.Material.Glacier
76	p.MaterialVariant = "2022 Stud"
77	p.Anchored = true
78	p.Parent = model
79	end
80	do
81	local p = Instance.new("Part")
82	p.Shape = Enum.PartType.Ball
83	p.Name = "WrapJoint_2"
84	p.Size = Vector3.new(0.8, 0.8, 0.8)
85	p.CFrame = CFrame.new(8, 2.5, 6)
86	p.BrickColor = BrickColor.new("Bright orange")
87	p.Material = Enum.Material.Glacier
88	p.MaterialVariant = "2022 Stud"
89	p.Anchored = true
90	p.Parent = model
91	end
92	do
93	local p = Instance.new("Part")
94	p.Shape = Enum.PartType.Cylinder
95	p.Name = "Wrap_3"
96	p.Size = Vector3.new(6.20484, 0.68, 0.68)
97	p.CFrame = CFrame.new(10.25, 0.25, -3) * CFrame.Angles(math.rad(-180), math.rad(85.2364), math.rad(166.01))
98	p.BrickColor = BrickColor.new("Bright orange")
99	p.Material = Enum.Material.Glacier
100	p.MaterialVariant = "2022 Stud"
101	p.Anchored = true
102	p.Parent = model
103	end
104	do
105	local p = Instance.new("Part")
106	p.Shape = Enum.PartType.Ball
107	p.Name = "WrapJoint_3"
108	p.Size = Vector3.new(0.8, 0.8, 0.8)
109	p.CFrame = CFrame.new(10.5, 1, 0)
110	p.BrickColor = BrickColor.new("Bright orange")
111	p.Material = Enum.Material.Glacier
112	p.MaterialVariant = "2022 Stud"
113	p.Anchored = true
114	p.Parent = model
115	end
116	do
117	local p = Instance.new("Part")
118	p.Shape = Enum.PartType.Cylinder
119	p.Name = "Wrap_4"
120	p.Size = Vector3.new(4.5, 0.72, 0.72)
121	p.CFrame = CFrame.new(8.5, -1.25, -7.5) * CFrame.Angles(math.rad(-180), math.rad(45), math.rad(160.529))
122	p.BrickColor = BrickColor.new("Bright orange")
123	p.Material = Enum.Material.Glacier
124	p.MaterialVariant = "2022 Stud"
125	p.Anchored = true
126	p.Parent = model
127	end
128	do
129	local p = Instance.new("Part")
130	p.Shape = Enum.PartType.Ball
131	p.Name = "WrapJoint_4"
132	p.Size = Vector3.new(0.8, 0.8, 0.8)
133	p.CFrame = CFrame.new(10, -0.5, -6)
134	p.BrickColor = BrickColor.new("Bright orange")
135	p.Material = Enum.Material.Glacier
136	p.MaterialVariant = "2022 Stud"
137	p.Anchored = true
138	p.Parent = model
139	end
140	do
141	local p = Instance.new("Part")
142	p.Shape = Enum.PartType.Cylinder
143	p.Name = "Wrap_5"
144	p.Size = Vector3.new(3.08058, 0.76, 0.76)
145	p.CFrame = CFrame.new(5.5, -2.35, -9) * CFrame.Angles(math.rad(-180), math.rad(0), math.rad(166.866))
146	p.BrickColor = BrickColor.new("Bright orange")
147	p.Material = Enum.Material.Glacier
148	p.MaterialVariant = "2022 Stud"
149	p.Anchored = true
150	p.Parent = model
151	end
152	do
153	local p = Instance.new("Part")
154	p.Shape = Enum.PartType.Ball
155	p.Name = "WrapJoint_5"
156	p.Size = Vector3.new(0.8, 0.8, 0.8)
157	p.CFrame = CFrame.new(7, -2, -9)
158	p.BrickColor = BrickColor.new("Bright orange")
159	p.Material = Enum.Material.Glacier
160	p.MaterialVariant = "2022 Stud"
161	p.Anchored = true
162	p.Parent = model
163	end
164	do
165	local p = Instance.new("Part")
166	p.Shape = Enum.PartType.Cylinder
167	p.Name = "MaleCable"
168	p.Size = Vector3.new(2.31517, 0.76, 0.76)
169	p.CFrame = CFrame.new(-1, 3.4, 4.5) * CFrame.Angles(math.rad(0), math.rad(-26.5651), math.rad(15.0203))
170	p.BrickColor = BrickColor.new("Bright orange")
171	p.Material = Enum.Material.Glacier
172	p.MaterialVariant = "2022 Stud"
173	p.Anchored = true
174	p.Parent = model
175	end
176	do
177	local p = Instance.new("Part")
178	p.Shape = Enum.PartType.Ball
179	p.Name = "MaleCableJoint"
180	p.Size = Vector3.new(0.8, 0.8, 0.8)
181	p.CFrame = CFrame.new(0, 3.7, 5)
182	p.BrickColor = BrickColor.new("Bright orange")
183	p.Material = Enum.Material.Glacier
184	p.MaterialVariant = "2022 Stud"
185	p.Anchored = true
186	p.Parent = model
187	end
188	do
189	local p = Instance.new("Part")
190	p.Shape = Enum.PartType.Cylinder
191	p.Name = "MaleSR_Base"
192	p.Size = Vector3.new(1.53297, 1, 1)
193	p.CFrame = CFrame.new(0.75, 3.75, 5.15) * CFrame.Angles(math.rad(0), math.rad(-11.3099), math.rad(3.74022))
194	p.BrickColor = BrickColor.new("Black")
195	p.Material = Enum.Material.Glacier
196	p.MaterialVariant = "2022 Glue"
197	p.Anchored = true
198	p.Parent = model
199	end
200	do
201	local p = Instance.new("Part")
202	p.Shape = Enum.PartType.Cylinder
203	p.Name = "MaleSR_Rib_0"
204	p.Size = Vector3.new(0.122638, 1.11, 1.11)
205	p.CFrame = CFrame.new(0.15, 3.71, 5.03) * CFrame.Angles(math.rad(0), math.rad(-11.3099), math.rad(3.74022))
206	p.BrickColor = BrickColor.new("Black")
207	p.Material = Enum.Material.Glacier
208	p.MaterialVariant = "2022 Glue"
209	p.Anchored = true
210	p.Parent = model
211	end
212	do
213	local p = Instance.new("Part")
214	p.Shape = Enum.PartType.Cylinder
215	p.Name = "MaleSR_Rib_1"
216	p.Size = Vector3.new(0.122638, 1.15, 1.15)
217	p.CFrame = CFrame.new(0.54, 3.736, 5.108) * CFrame.Angles(math.rad(0), math.rad(-11.3099), math.rad(3.74022))
218	p.BrickColor = BrickColor.new("Black")
219	p.Material = Enum.Material.Glacier
220	p.MaterialVariant = "2022 Glue"
221	p.Anchored = true
222	p.Parent = model
223	end
224	do
225	local p = Instance.new("Part")
226	p.Shape = Enum.PartType.Cylinder
227	p.Name = "MaleSR_Rib_2"
228	p.Size = Vector3.new(0.122638, 1.11, 1.11)
229	p.CFrame = CFrame.new(0.93, 3.762, 5.186) * CFrame.Angles(math.rad(0), math.rad(-11.3099), math.rad(3.74022))
230	p.BrickColor = BrickColor.new("Black")
231	p.Material = Enum.Material.Glacier
232	p.MaterialVariant = "2022 Glue"
233	p.Anchored = true
234	p.Parent = model
235	end
236	do
237	local p = Instance.new("Part")
238	p.Shape = Enum.PartType.Cylinder
239	p.Name = "MaleSR_Rib_3"
240	p.Size = Vector3.new(0.122638, 1.15, 1.15)
241	p.CFrame = CFrame.new(1.32, 3.788, 5.264) * CFrame.Angles(math.rad(0), math.rad(-11.3099), math.rad(3.74022))
242	p.BrickColor = BrickColor.new("Black")
243	p.Material = Enum.Material.Glacier
244	p.MaterialVariant = "2022 Glue"
245	p.Anchored = true
246	p.Parent = model
247	end
248	do
249	local p = Instance.new("Part")
250	p.Name = "MaleBody_1"
251	p.Size = Vector3.new(1.02103, 1.2, 1.4)
252	p.CFrame = CFrame.new(2, 3.825, 5.4) * CFrame.Angles(math.rad(0), math.rad(-11.3099), math.rad(2.80691))
253	p.BrickColor = BrickColor.new("Black")
254	p.Material = Enum.Material.Glacier
255	p.MaterialVariant = "2022 Glue"
256	p.Anchored = true
257	p.Parent = model
258	end
259	do
260	local p = Instance.new("Part")
261	p.Name = "MaleBody_2"
262	p.Size = Vector3.new(1.02103, 1.4, 1.8)
263	p.CFrame = CFrame.new(3, 3.875, 5.6) * CFrame.Angles(math.rad(0), math.rad(-11.3099), math.rad(2.80691))
264	p.BrickColor = BrickColor.new("Black")
265	p.Material = Enum.Material.Glacier
266	p.MaterialVariant = "2022 Glue"
267	p.Anchored = true
268	p.Parent = model
269	end
270	do
271	local p = Instance.new("Part")
272	p.Name = "Prong_L"
273	p.Size = Vector3.new(1.2, 0.3, 0.1)
274	p.CFrame = CFrame.new(3.99959, 4.14873, 6.28619) * CFrame.Angles(math.rad(0), math.rad(-11.3099), math.rad(2.80691))
275	p.BrickColor = BrickColor.new("Silver")
276	p.Material = Enum.Material.Glacier
277	p.MaterialVariant = "2022 Stud"
278	p.Anchored = true
279	p.Parent = model
280	end
281	do
282	local p = Instance.new("Part")
283	p.Name = "Prong_R"
284	p.Size = Vector3.new(1.2, 0.3, 0.1)
285	p.CFrame = CFrame.new(4.15648, 4.14873, 5.50173) * CFrame.Angles(math.rad(0), math.rad(-11.3099), math.rad(2.80691))
286	p.BrickColor = BrickColor.new("Silver")
287	p.Material = Enum.Material.Glacier
288	p.MaterialVariant = "2022 Stud"
289	p.Anchored = true
290	p.Parent = model
291	end
292	do
293	local p = Instance.new("Part")
294	p.Shape = Enum.PartType.Cylinder
295	p.Name = "Prong_G"
296	p.Size = Vector3.new(1.2, 0.25, 0.25)
297	p.CFrame = CFrame.new(4.14123, 3.6317, 5.82824) * CFrame.Angles(math.rad(0), math.rad(-11.3099), math.rad(2.80691))
298	p.BrickColor = BrickColor.new("Silver")
299	p.Material = Enum.Material.Glacier
300	p.MaterialVariant = "2022 Stud"
301	p.Anchored = true
302	p.Parent = model
303	end
304	do
305	local p = Instance.new("Part")
306	p.Shape = Enum.PartType.Cylinder
307	p.Name = "FemCable"
308	p.Size = Vector3.new(2.27156, 0.72, 0.72)
309	p.CFrame = CFrame.new(3, -2.9, -9.5) * CFrame.Angles(math.rad(-180), math.rad(26.5651), math.rad(169.858))
310	p.BrickColor = BrickColor.new("Bright orange")
311	p.Material = Enum.Material.Glacier
312	p.MaterialVariant = "2022 Stud"
313	p.Anchored = true
314	p.Parent = model
315	end
316	do
317	local p = Instance.new("Part")
318	p.Shape = Enum.PartType.Ball
319	p.Name = "FemCableJoint"
320	p.Size = Vector3.new(0.8, 0.8, 0.8)
321	p.CFrame = CFrame.new(2, -3.1, -10)
322	p.BrickColor = BrickColor.new("Bright orange")
323	p.Material = Enum.Material.Glacier
324	p.MaterialVariant = "2022 Stud"
325	p.Anchored = true
326	p.Parent = model
327	end
328	do
329	local p = Instance.new("Part")
330	p.Shape = Enum.PartType.Cylinder
331	p.Name = "FemSR_Base"
332	p.Size = Vector3.new(1.5, 1, 1)
333	p.CFrame = CFrame.new(1.29, -3.1, -10) * CFrame.Angles(math.rad(-180), math.rad(0), math.rad(-180))
334	p.BrickColor = BrickColor.new("Black")
335	p.Material = Enum.Material.Glacier
336	p.MaterialVariant = "2022 Glue"
337	p.Anchored = true
338	p.Parent = model
339	end
340	do
341	local p = Instance.new("Part")
342	p.Shape = Enum.PartType.Cylinder
343	p.Name = "FemSR_Rib_0"
344	p.Size = Vector3.new(0.12, 1.15, 1.15)
345	p.CFrame = CFrame.new(1.85, -3.1, -10) * CFrame.Angles(math.rad(-180), math.rad(0), math.rad(-180))
346	p.BrickColor = BrickColor.new("Black")
347	p.Material = Enum.Material.Glacier
348	p.MaterialVariant = "2022 Glue"
349	p.Anchored = true
350	p.Parent = model
351	end
352	do
353	local p = Instance.new("Part")
354	p.Shape = Enum.PartType.Cylinder
355	p.Name = "FemSR_Rib_1"
356	p.Size = Vector3.new(0.12, 1.15, 1.15)
357	p.CFrame = CFrame.new(1.46, -3.1, -10) * CFrame.Angles(math.rad(-180), math.rad(0), math.rad(-180))
358	p.BrickColor = BrickColor.new("Black")
359	p.Material = Enum.Material.Glacier
360	p.MaterialVariant = "2022 Glue"
361	p.Anchored = true
362	p.Parent = model
363	end
364	do
365	local p = Instance.new("Part")
366	p.Shape = Enum.PartType.Cylinder
367	p.Name = "FemSR_Rib_2"
368	p.Size = Vector3.new(0.12, 1.15, 1.15)
369	p.CFrame = CFrame.new(1.07, -3.1, -10) * CFrame.Angles(math.rad(-180), math.rad(0), math.rad(-180))
370	p.BrickColor = BrickColor.new("Black")
371	p.Material = Enum.Material.Glacier
372	p.MaterialVariant = "2022 Glue"
373	p.Anchored = true
374	p.Parent = model
375	end
376	do
377	local p = Instance.new("Part")
378	p.Shape = Enum.PartType.Cylinder
379	p.Name = "FemSR_Rib_3"
380	p.Size = Vector3.new(0.12, 1.15, 1.15)
381	p.CFrame = CFrame.new(0.68, -3.1, -10) * CFrame.Angles(math.rad(-180), math.rad(0), math.rad(-180))
382	p.BrickColor = BrickColor.new("Black")
383	p.Material = Enum.Material.Glacier
384	p.MaterialVariant = "2022 Glue"
385	p.Anchored = true
386	p.Parent = model
387	end
388	do
389	local p = Instance.new("Part")
390	p.Name = "FemBody_1"
391	p.Size = Vector3.new(1, 1.4, 1.6)
392	p.CFrame = CFrame.new(0, -3.1, -10) * CFrame.Angles(math.rad(-180), math.rad(0), math.rad(-180))
393	p.BrickColor = BrickColor.new("Black")
394	p.Material = Enum.Material.Glacier
395	p.MaterialVariant = "2022 Glue"
396	p.Anchored = true
397	p.Parent = model
398	end
399	do
400	local p = Instance.new("Part")
401	p.Name = "FemBody_2"
402	p.Size = Vector3.new(1, 1.8, 2)
403	p.CFrame = CFrame.new(-1, -3.1, -10) * CFrame.Angles(math.rad(-180), math.rad(0), math.rad(-180))
404	p.BrickColor = BrickColor.new("Black")
405	p.Material = Enum.Material.Glacier
406	p.MaterialVariant = "2022 Glue"
407	p.Anchored = true
408	p.Parent = model
409	end
410	do
411	local p = Instance.new("Part")
412	p.Name = "FemBody_3"
413	p.Size = Vector3.new(1, 1.4, 1.6)
414	p.CFrame = CFrame.new(-2, -3.1, -10) * CFrame.Angles(math.rad(-180), math.rad(0), math.rad(-180))
415	p.BrickColor = BrickColor.new("Black")
416	p.Material = Enum.Material.Glacier
417	p.MaterialVariant = "2022 Glue"
418	p.Anchored = true
419	p.Parent = model
420	end
421	do
422	local p = Instance.new("Part")
423	p.Name = "FemSlot_L"
424	p.Size = Vector3.new(0.05, 0.4, 0.1)
425	p.CFrame = CFrame.new(-2.51, -2.9, -10.4)
426	p.BrickColor = BrickColor.new("Really black")
427	p.Material = Enum.Material.Glacier
428	p.MaterialVariant = "2022 Universal"
429	p.Anchored = true
430	p.Parent = model
431	end
432	do
433	local p = Instance.new("Part")
434	p.Name = "FemSlot_R"
435	p.Size = Vector3.new(0.05, 0.4, 0.1)
436	p.CFrame = CFrame.new(-2.51, -2.9, -9.6)
437	p.BrickColor = BrickColor.new("Really black")
438	p.Material = Enum.Material.Glacier
439	p.MaterialVariant = "2022 Universal"
440	p.Anchored = true
441	p.Parent = model
442	end
443	do
444	local p = Instance.new("Part")
445	p.Shape = Enum.PartType.Cylinder
446	p.Name = "FemSlot_G"
447	p.Size = Vector3.new(0.05, 0.3, 0.3)
448	p.CFrame = CFrame.new(-2.55, -3.5, -10)
449	p.BrickColor = BrickColor.new("Really black")
450	p.Material = Enum.Material.Glacier
451	p.MaterialVariant = "2022 Universal"
452	p.Anchored = true
453	p.Parent = model
454	end
455	do
456	local rightV = Vector3.new(1,0,0).Unit
457	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
458	local normalV = upV:Cross(rightV)
459	local pos = Vector3.new(0, -3.06, 0.04)
460	local cyl = Instance.new("Part")
461	cyl.Shape = Enum.PartType.Cylinder
462	cyl.Size = Vector3.new(0.8, 9.44, 9.44)
463	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
464	cyl.BrickColor = BrickColor.new("Bright orange")
465	cyl.Material = Enum.Material.Glacier
466	cyl.MaterialVariant = "2022 Stud"
467	cyl.Anchored = true; cyl.Parent = workspace
468	local cuts = {}
469	local hole = Instance.new("Part")
470	hole.Shape = Enum.PartType.Cylinder
471	hole.Size = Vector3.new(1, 7.84, 7.84)
472	hole.CFrame = cyl.CFrame
473	hole.BrickColor = BrickColor.new("Bright orange")
474	hole.Material = Enum.Material.Glacier
475	hole.MaterialVariant = "2022 Stud"
476	hole.Anchored = true; hole.Parent = workspace
477	table.insert(cuts, hole)
478	local angBoxes = {}
479	do
480	local edgeDir = 1rightV + 0upV
481	local edgePerp = 0rightV + 1upV
482	local cut = Instance.new("Part")
483	cut.Size = Vector3.new(18.88, 1, 18.88)
484	cut.CFrame = CFrame.fromMatrix(pos + -1 * 9.44 * edgePerp, edgeDir, normalV)
485	cut.BrickColor = BrickColor.new("Bright orange")
486	cut.Material = Enum.Material.Glacier
487	cut.MaterialVariant = "2022 Stud"
488	cut.Anchored = true; cut.Parent = workspace
489	table.insert(angBoxes, cut)
490	end
491	do
492	local edgeDir = -1rightV + 0upV
493	local edgePerp = 0rightV + -1upV
494	local cut = Instance.new("Part")
495	cut.Size = Vector3.new(18.88, 1, 18.88)
496	cut.CFrame = CFrame.fromMatrix(pos + 1 * 9.44 * edgePerp, edgeDir, normalV)
497	cut.BrickColor = BrickColor.new("Bright orange")
498	cut.Material = Enum.Material.Glacier
499	cut.MaterialVariant = "2022 Stud"
500	cut.Anchored = true; cut.Parent = workspace
501	table.insert(angBoxes, cut)
502	end
503	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
504	if #cuts > 0 then
505	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
506	for _, c in ipairs(cuts) do c:Destroy() end
507	if ok and result then
508	cyl:Destroy()
509	result.Name = "Coil_0_0_A"; result.Anchored = true; result.Parent = model
510	else
511	cyl.Name = "Coil_0_0_A"; cyl.Parent = model
512	end
513	else
514	cyl.Name = "Coil_0_0_A"; cyl.Parent = model
515	end
516	end
517	do
518	local rightV = Vector3.new(1,0,0).Unit
519	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
520	local normalV = upV:Cross(rightV)
521	local pos = Vector3.new(0, -3.02, 0)
522	local cyl = Instance.new("Part")
523	cyl.Shape = Enum.PartType.Cylinder
524	cyl.Size = Vector3.new(0.8, 9.44, 9.44)
525	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
526	cyl.BrickColor = BrickColor.new("Bright orange")
527	cyl.Material = Enum.Material.Glacier
528	cyl.MaterialVariant = "2022 Stud"
529	cyl.Anchored = true; cyl.Parent = workspace
530	local cuts = {}
531	local hole = Instance.new("Part")
532	hole.Shape = Enum.PartType.Cylinder
533	hole.Size = Vector3.new(1, 7.84, 7.84)
534	hole.CFrame = cyl.CFrame
535	hole.BrickColor = BrickColor.new("Bright orange")
536	hole.Material = Enum.Material.Glacier
537	hole.MaterialVariant = "2022 Stud"
538	hole.Anchored = true; hole.Parent = workspace
539	table.insert(cuts, hole)
540	local angBoxes = {}
541	do
542	local edgeDir = -1rightV + 0upV
543	local edgePerp = 0rightV + -1upV
544	local cut = Instance.new("Part")
545	cut.Size = Vector3.new(18.88, 1, 18.88)
546	cut.CFrame = CFrame.fromMatrix(pos + -1 * 9.44 * edgePerp, edgeDir, normalV)
547	cut.BrickColor = BrickColor.new("Bright orange")
548	cut.Material = Enum.Material.Glacier
549	cut.MaterialVariant = "2022 Stud"
550	cut.Anchored = true; cut.Parent = workspace
551	table.insert(angBoxes, cut)
552	end
553	do
554	local edgeDir = 1rightV + 0upV
555	local edgePerp = 0rightV + 1upV
556	local cut = Instance.new("Part")
557	cut.Size = Vector3.new(18.88, 1, 18.88)
558	cut.CFrame = CFrame.fromMatrix(pos + 1 * 9.44 * edgePerp, edgeDir, normalV)
559	cut.BrickColor = BrickColor.new("Bright orange")
560	cut.Material = Enum.Material.Glacier
561	cut.MaterialVariant = "2022 Stud"
562	cut.Anchored = true; cut.Parent = workspace
563	table.insert(angBoxes, cut)
564	end
565	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
566	if #cuts > 0 then
567	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
568	for _, c in ipairs(cuts) do c:Destroy() end
569	if ok and result then
570	cyl:Destroy()
571	result.Name = "Coil_0_0_B"; result.Anchored = true; result.Parent = model
572	else
573	cyl.Name = "Coil_0_0_B"; cyl.Parent = model
574	end
575	else
576	cyl.Name = "Coil_0_0_B"; cyl.Parent = model
577	end
578	end
579	do
580	local rightV = Vector3.new(1,0,0).Unit
581	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
582	local normalV = upV:Cross(rightV)
583	local pos = Vector3.new(0, -2.98, 0.04)
584	local cyl = Instance.new("Part")
585	cyl.Shape = Enum.PartType.Cylinder
586	cyl.Size = Vector3.new(0.8, 11.4, 11.4)
587	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
588	cyl.BrickColor = BrickColor.new("Bright orange")
589	cyl.Material = Enum.Material.Glacier
590	cyl.MaterialVariant = "2022 Stud"
591	cyl.Anchored = true; cyl.Parent = workspace
592	local cuts = {}
593	local hole = Instance.new("Part")
594	hole.Shape = Enum.PartType.Cylinder
595	hole.Size = Vector3.new(1, 9.8, 9.8)
596	hole.CFrame = cyl.CFrame
597	hole.BrickColor = BrickColor.new("Bright orange")
598	hole.Material = Enum.Material.Glacier
599	hole.MaterialVariant = "2022 Stud"
600	hole.Anchored = true; hole.Parent = workspace
601	table.insert(cuts, hole)
602	local angBoxes = {}
603	do
604	local edgeDir = 1rightV + 0upV
605	local edgePerp = 0rightV + 1upV
606	local cut = Instance.new("Part")
607	cut.Size = Vector3.new(22.8, 1, 22.8)
608	cut.CFrame = CFrame.fromMatrix(pos + -1 * 11.4 * edgePerp, edgeDir, normalV)
609	cut.BrickColor = BrickColor.new("Bright orange")
610	cut.Material = Enum.Material.Glacier
611	cut.MaterialVariant = "2022 Stud"
612	cut.Anchored = true; cut.Parent = workspace
613	table.insert(angBoxes, cut)
614	end
615	do
616	local edgeDir = -1rightV + 0upV
617	local edgePerp = 0rightV + -1upV
618	local cut = Instance.new("Part")
619	cut.Size = Vector3.new(22.8, 1, 22.8)
620	cut.CFrame = CFrame.fromMatrix(pos + 1 * 11.4 * edgePerp, edgeDir, normalV)
621	cut.BrickColor = BrickColor.new("Bright orange")
622	cut.Material = Enum.Material.Glacier
623	cut.MaterialVariant = "2022 Stud"
624	cut.Anchored = true; cut.Parent = workspace
625	table.insert(angBoxes, cut)
626	end
627	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
628	if #cuts > 0 then
629	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
630	for _, c in ipairs(cuts) do c:Destroy() end
631	if ok and result then
632	cyl:Destroy()
633	result.Name = "Coil_0_1_A"; result.Anchored = true; result.Parent = model
634	else
635	cyl.Name = "Coil_0_1_A"; cyl.Parent = model
636	end
637	else
638	cyl.Name = "Coil_0_1_A"; cyl.Parent = model
639	end
640	end
641	do
642	local rightV = Vector3.new(1,0,0).Unit
643	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
644	local normalV = upV:Cross(rightV)
645	local pos = Vector3.new(0, -2.94, 0)
646	local cyl = Instance.new("Part")
647	cyl.Shape = Enum.PartType.Cylinder
648	cyl.Size = Vector3.new(0.8, 11.4, 11.4)
649	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
650	cyl.BrickColor = BrickColor.new("Bright orange")
651	cyl.Material = Enum.Material.Glacier
652	cyl.MaterialVariant = "2022 Stud"
653	cyl.Anchored = true; cyl.Parent = workspace
654	local cuts = {}
655	local hole = Instance.new("Part")
656	hole.Shape = Enum.PartType.Cylinder
657	hole.Size = Vector3.new(1, 9.8, 9.8)
658	hole.CFrame = cyl.CFrame
659	hole.BrickColor = BrickColor.new("Bright orange")
660	hole.Material = Enum.Material.Glacier
661	hole.MaterialVariant = "2022 Stud"
662	hole.Anchored = true; hole.Parent = workspace
663	table.insert(cuts, hole)
664	local angBoxes = {}
665	do
666	local edgeDir = -1rightV + 0upV
667	local edgePerp = 0rightV + -1upV
668	local cut = Instance.new("Part")
669	cut.Size = Vector3.new(22.8, 1, 22.8)
670	cut.CFrame = CFrame.fromMatrix(pos + -1 * 11.4 * edgePerp, edgeDir, normalV)
671	cut.BrickColor = BrickColor.new("Bright orange")
672	cut.Material = Enum.Material.Glacier
673	cut.MaterialVariant = "2022 Stud"
674	cut.Anchored = true; cut.Parent = workspace
675	table.insert(angBoxes, cut)
676	end
677	do
678	local edgeDir = 1rightV + 0upV
679	local edgePerp = 0rightV + 1upV
680	local cut = Instance.new("Part")
681	cut.Size = Vector3.new(22.8, 1, 22.8)
682	cut.CFrame = CFrame.fromMatrix(pos + 1 * 11.4 * edgePerp, edgeDir, normalV)
683	cut.BrickColor = BrickColor.new("Bright orange")
684	cut.Material = Enum.Material.Glacier
685	cut.MaterialVariant = "2022 Stud"
686	cut.Anchored = true; cut.Parent = workspace
687	table.insert(angBoxes, cut)
688	end
689	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
690	if #cuts > 0 then
691	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
692	for _, c in ipairs(cuts) do c:Destroy() end
693	if ok and result then
694	cyl:Destroy()
695	result.Name = "Coil_0_1_B"; result.Anchored = true; result.Parent = model
696	else
697	cyl.Name = "Coil_0_1_B"; cyl.Parent = model
698	end
699	else
700	cyl.Name = "Coil_0_1_B"; cyl.Parent = model
701	end
702	end
703	do
704	local rightV = Vector3.new(1,0,0).Unit
705	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
706	local normalV = upV:Cross(rightV)
707	local pos = Vector3.new(0, -2.9, 0.12)
708	local cyl = Instance.new("Part")
709	cyl.Shape = Enum.PartType.Cylinder
710	cyl.Size = Vector3.new(0.8, 13.36, 13.36)
711	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
712	cyl.BrickColor = BrickColor.new("Bright orange")
713	cyl.Material = Enum.Material.Glacier
714	cyl.MaterialVariant = "2022 Stud"
715	cyl.Anchored = true; cyl.Parent = workspace
716	local cuts = {}
717	local hole = Instance.new("Part")
718	hole.Shape = Enum.PartType.Cylinder
719	hole.Size = Vector3.new(1, 11.76, 11.76)
720	hole.CFrame = cyl.CFrame
721	hole.BrickColor = BrickColor.new("Bright orange")
722	hole.Material = Enum.Material.Glacier
723	hole.MaterialVariant = "2022 Stud"
724	hole.Anchored = true; hole.Parent = workspace
725	table.insert(cuts, hole)
726	local angBoxes = {}
727	do
728	local edgeDir = 1rightV + 0upV
729	local edgePerp = 0rightV + 1upV
730	local cut = Instance.new("Part")
731	cut.Size = Vector3.new(26.72, 1, 26.72)
732	cut.CFrame = CFrame.fromMatrix(pos + -1 * 13.36 * edgePerp, edgeDir, normalV)
733	cut.BrickColor = BrickColor.new("Bright orange")
734	cut.Material = Enum.Material.Glacier
735	cut.MaterialVariant = "2022 Stud"
736	cut.Anchored = true; cut.Parent = workspace
737	table.insert(angBoxes, cut)
738	end
739	do
740	local edgeDir = -1rightV + 0upV
741	local edgePerp = 0rightV + -1upV
742	local cut = Instance.new("Part")
743	cut.Size = Vector3.new(26.72, 1, 26.72)
744	cut.CFrame = CFrame.fromMatrix(pos + 1 * 13.36 * edgePerp, edgeDir, normalV)
745	cut.BrickColor = BrickColor.new("Bright orange")
746	cut.Material = Enum.Material.Glacier
747	cut.MaterialVariant = "2022 Stud"
748	cut.Anchored = true; cut.Parent = workspace
749	table.insert(angBoxes, cut)
750	end
751	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
752	if #cuts > 0 then
753	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
754	for _, c in ipairs(cuts) do c:Destroy() end
755	if ok and result then
756	cyl:Destroy()
757	result.Name = "Coil_0_2_A"; result.Anchored = true; result.Parent = model
758	else
759	cyl.Name = "Coil_0_2_A"; cyl.Parent = model
760	end
761	else
762	cyl.Name = "Coil_0_2_A"; cyl.Parent = model
763	end
764	end
765	do
766	local rightV = Vector3.new(1,0,0).Unit
767	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
768	local normalV = upV:Cross(rightV)
769	local pos = Vector3.new(0, -2.86, 0.08)
770	local cyl = Instance.new("Part")
771	cyl.Shape = Enum.PartType.Cylinder
772	cyl.Size = Vector3.new(0.8, 13.36, 13.36)
773	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
774	cyl.BrickColor = BrickColor.new("Bright orange")
775	cyl.Material = Enum.Material.Glacier
776	cyl.MaterialVariant = "2022 Stud"
777	cyl.Anchored = true; cyl.Parent = workspace
778	local cuts = {}
779	local hole = Instance.new("Part")
780	hole.Shape = Enum.PartType.Cylinder
781	hole.Size = Vector3.new(1, 11.76, 11.76)
782	hole.CFrame = cyl.CFrame
783	hole.BrickColor = BrickColor.new("Bright orange")
784	hole.Material = Enum.Material.Glacier
785	hole.MaterialVariant = "2022 Stud"
786	hole.Anchored = true; hole.Parent = workspace
787	table.insert(cuts, hole)
788	local angBoxes = {}
789	do
790	local edgeDir = -1rightV + 0upV
791	local edgePerp = 0rightV + -1upV
792	local cut = Instance.new("Part")
793	cut.Size = Vector3.new(26.72, 1, 26.72)
794	cut.CFrame = CFrame.fromMatrix(pos + -1 * 13.36 * edgePerp, edgeDir, normalV)
795	cut.BrickColor = BrickColor.new("Bright orange")
796	cut.Material = Enum.Material.Glacier
797	cut.MaterialVariant = "2022 Stud"
798	cut.Anchored = true; cut.Parent = workspace
799	table.insert(angBoxes, cut)
800	end
801	do
802	local edgeDir = 1rightV + 0upV
803	local edgePerp = 0rightV + 1upV
804	local cut = Instance.new("Part")
805	cut.Size = Vector3.new(26.72, 1, 26.72)
806	cut.CFrame = CFrame.fromMatrix(pos + 1 * 13.36 * edgePerp, edgeDir, normalV)
807	cut.BrickColor = BrickColor.new("Bright orange")
808	cut.Material = Enum.Material.Glacier
809	cut.MaterialVariant = "2022 Stud"
810	cut.Anchored = true; cut.Parent = workspace
811	table.insert(angBoxes, cut)
812	end
813	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
814	if #cuts > 0 then
815	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
816	for _, c in ipairs(cuts) do c:Destroy() end
817	if ok and result then
818	cyl:Destroy()
819	result.Name = "Coil_0_2_B"; result.Anchored = true; result.Parent = model
820	else
821	cyl.Name = "Coil_0_2_B"; cyl.Parent = model
822	end
823	else
824	cyl.Name = "Coil_0_2_B"; cyl.Parent = model
825	end
826	end
827	do
828	local rightV = Vector3.new(1,0,0).Unit
829	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
830	local normalV = upV:Cross(rightV)
831	local pos = Vector3.new(0, -2.86, 0.04)
832	local cyl = Instance.new("Part")
833	cyl.Shape = Enum.PartType.Cylinder
834	cyl.Size = Vector3.new(0.8, 14.92, 14.92)
835	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
836	cyl.BrickColor = BrickColor.new("Bright orange")
837	cyl.Material = Enum.Material.Glacier
838	cyl.MaterialVariant = "2022 Stud"
839	cyl.Anchored = true; cyl.Parent = workspace
840	local cuts = {}
841	local hole = Instance.new("Part")
842	hole.Shape = Enum.PartType.Cylinder
843	hole.Size = Vector3.new(1, 13.32, 13.32)
844	hole.CFrame = cyl.CFrame
845	hole.BrickColor = BrickColor.new("Bright orange")
846	hole.Material = Enum.Material.Glacier
847	hole.MaterialVariant = "2022 Stud"
848	hole.Anchored = true; hole.Parent = workspace
849	table.insert(cuts, hole)
850	local angBoxes = {}
851	do
852	local edgeDir = 1rightV + 0upV
853	local edgePerp = 0rightV + 1upV
854	local cut = Instance.new("Part")
855	cut.Size = Vector3.new(29.84, 1, 29.84)
856	cut.CFrame = CFrame.fromMatrix(pos + -1 * 14.92 * edgePerp, edgeDir, normalV)
857	cut.BrickColor = BrickColor.new("Bright orange")
858	cut.Material = Enum.Material.Glacier
859	cut.MaterialVariant = "2022 Stud"
860	cut.Anchored = true; cut.Parent = workspace
861	table.insert(angBoxes, cut)
862	end
863	do
864	local edgeDir = -1rightV + 0upV
865	local edgePerp = 0rightV + -1upV
866	local cut = Instance.new("Part")
867	cut.Size = Vector3.new(29.84, 1, 29.84)
868	cut.CFrame = CFrame.fromMatrix(pos + 1 * 14.92 * edgePerp, edgeDir, normalV)
869	cut.BrickColor = BrickColor.new("Bright orange")
870	cut.Material = Enum.Material.Glacier
871	cut.MaterialVariant = "2022 Stud"
872	cut.Anchored = true; cut.Parent = workspace
873	table.insert(angBoxes, cut)
874	end
875	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
876	if #cuts > 0 then
877	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
878	for _, c in ipairs(cuts) do c:Destroy() end
879	if ok and result then
880	cyl:Destroy()
881	result.Name = "Coil_0_3_A"; result.Anchored = true; result.Parent = model
882	else
883	cyl.Name = "Coil_0_3_A"; cyl.Parent = model
884	end
885	else
886	cyl.Name = "Coil_0_3_A"; cyl.Parent = model
887	end
888	end
889	do
890	local rightV = Vector3.new(1,0,0).Unit
891	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
892	local normalV = upV:Cross(rightV)
893	local pos = Vector3.new(0, -2.82, 0)
894	local cyl = Instance.new("Part")
895	cyl.Shape = Enum.PartType.Cylinder
896	cyl.Size = Vector3.new(0.8, 14.92, 14.92)
897	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
898	cyl.BrickColor = BrickColor.new("Bright orange")
899	cyl.Material = Enum.Material.Glacier
900	cyl.MaterialVariant = "2022 Stud"
901	cyl.Anchored = true; cyl.Parent = workspace
902	local cuts = {}
903	local hole = Instance.new("Part")
904	hole.Shape = Enum.PartType.Cylinder
905	hole.Size = Vector3.new(1, 13.32, 13.32)
906	hole.CFrame = cyl.CFrame
907	hole.BrickColor = BrickColor.new("Bright orange")
908	hole.Material = Enum.Material.Glacier
909	hole.MaterialVariant = "2022 Stud"
910	hole.Anchored = true; hole.Parent = workspace
911	table.insert(cuts, hole)
912	local angBoxes = {}
913	do
914	local edgeDir = -1rightV + 0upV
915	local edgePerp = 0rightV + -1upV
916	local cut = Instance.new("Part")
917	cut.Size = Vector3.new(29.84, 1, 29.84)
918	cut.CFrame = CFrame.fromMatrix(pos + -1 * 14.92 * edgePerp, edgeDir, normalV)
919	cut.BrickColor = BrickColor.new("Bright orange")
920	cut.Material = Enum.Material.Glacier
921	cut.MaterialVariant = "2022 Stud"
922	cut.Anchored = true; cut.Parent = workspace
923	table.insert(angBoxes, cut)
924	end
925	do
926	local edgeDir = 1rightV + 0upV
927	local edgePerp = 0rightV + 1upV
928	local cut = Instance.new("Part")
929	cut.Size = Vector3.new(29.84, 1, 29.84)
930	cut.CFrame = CFrame.fromMatrix(pos + 1 * 14.92 * edgePerp, edgeDir, normalV)
931	cut.BrickColor = BrickColor.new("Bright orange")
932	cut.Material = Enum.Material.Glacier
933	cut.MaterialVariant = "2022 Stud"
934	cut.Anchored = true; cut.Parent = workspace
935	table.insert(angBoxes, cut)
936	end
937	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
938	if #cuts > 0 then
939	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
940	for _, c in ipairs(cuts) do c:Destroy() end
941	if ok and result then
942	cyl:Destroy()
943	result.Name = "Coil_0_3_B"; result.Anchored = true; result.Parent = model
944	else
945	cyl.Name = "Coil_0_3_B"; cyl.Parent = model
946	end
947	else
948	cyl.Name = "Coil_0_3_B"; cyl.Parent = model
949	end
950	end
951	do
952	local rightV = Vector3.new(1,0,0).Unit
953	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
954	local normalV = upV:Cross(rightV)
955	local pos = Vector3.new(0, -2.7, 0.12)
956	local cyl = Instance.new("Part")
957	cyl.Shape = Enum.PartType.Cylinder
958	cyl.Size = Vector3.new(0.8, 16.88, 16.88)
959	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
960	cyl.BrickColor = BrickColor.new("Bright orange")
961	cyl.Material = Enum.Material.Glacier
962	cyl.MaterialVariant = "2022 Stud"
963	cyl.Anchored = true; cyl.Parent = workspace
964	local cuts = {}
965	local hole = Instance.new("Part")
966	hole.Shape = Enum.PartType.Cylinder
967	hole.Size = Vector3.new(1, 15.28, 15.28)
968	hole.CFrame = cyl.CFrame
969	hole.BrickColor = BrickColor.new("Bright orange")
970	hole.Material = Enum.Material.Glacier
971	hole.MaterialVariant = "2022 Stud"
972	hole.Anchored = true; hole.Parent = workspace
973	table.insert(cuts, hole)
974	local angBoxes = {}
975	do
976	local edgeDir = 1rightV + 0upV
977	local edgePerp = 0rightV + 1upV
978	local cut = Instance.new("Part")
979	cut.Size = Vector3.new(33.76, 1, 33.76)
980	cut.CFrame = CFrame.fromMatrix(pos + -1 * 16.88 * edgePerp, edgeDir, normalV)
981	cut.BrickColor = BrickColor.new("Bright orange")
982	cut.Material = Enum.Material.Glacier
983	cut.MaterialVariant = "2022 Stud"
984	cut.Anchored = true; cut.Parent = workspace
985	table.insert(angBoxes, cut)
986	end
987	do
988	local edgeDir = -1rightV + 0upV
989	local edgePerp = 0rightV + -1upV
990	local cut = Instance.new("Part")
991	cut.Size = Vector3.new(33.76, 1, 33.76)
992	cut.CFrame = CFrame.fromMatrix(pos + 1 * 16.88 * edgePerp, edgeDir, normalV)
993	cut.BrickColor = BrickColor.new("Bright orange")
994	cut.Material = Enum.Material.Glacier
995	cut.MaterialVariant = "2022 Stud"
996	cut.Anchored = true; cut.Parent = workspace
997	table.insert(angBoxes, cut)
998	end
999	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1000	if #cuts > 0 then
1001	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1002	for _, c in ipairs(cuts) do c:Destroy() end
1003	if ok and result then
1004	cyl:Destroy()
1005	result.Name = "Coil_0_4_A"; result.Anchored = true; result.Parent = model
1006	else
1007	cyl.Name = "Coil_0_4_A"; cyl.Parent = model
1008	end
1009	else
1010	cyl.Name = "Coil_0_4_A"; cyl.Parent = model
1011	end
1012	end
1013	do
1014	local rightV = Vector3.new(1,0,0).Unit
1015	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1016	local normalV = upV:Cross(rightV)
1017	local pos = Vector3.new(0, -2.62, 0.08)
1018	local cyl = Instance.new("Part")
1019	cyl.Shape = Enum.PartType.Cylinder
1020	cyl.Size = Vector3.new(0.8, 16.88, 16.88)
1021	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1022	cyl.BrickColor = BrickColor.new("Bright orange")
1023	cyl.Material = Enum.Material.Glacier
1024	cyl.MaterialVariant = "2022 Stud"
1025	cyl.Anchored = true; cyl.Parent = workspace
1026	local cuts = {}
1027	local hole = Instance.new("Part")
1028	hole.Shape = Enum.PartType.Cylinder
1029	hole.Size = Vector3.new(1, 15.28, 15.28)
1030	hole.CFrame = cyl.CFrame
1031	hole.BrickColor = BrickColor.new("Bright orange")
1032	hole.Material = Enum.Material.Glacier
1033	hole.MaterialVariant = "2022 Stud"
1034	hole.Anchored = true; hole.Parent = workspace
1035	table.insert(cuts, hole)
1036	local angBoxes = {}
1037	do
1038	local edgeDir = -1rightV + 0upV
1039	local edgePerp = 0rightV + -1upV
1040	local cut = Instance.new("Part")
1041	cut.Size = Vector3.new(33.76, 1, 33.76)
1042	cut.CFrame = CFrame.fromMatrix(pos + -1 * 16.88 * edgePerp, edgeDir, normalV)
1043	cut.BrickColor = BrickColor.new("Bright orange")
1044	cut.Material = Enum.Material.Glacier
1045	cut.MaterialVariant = "2022 Stud"
1046	cut.Anchored = true; cut.Parent = workspace
1047	table.insert(angBoxes, cut)
1048	end
1049	do
1050	local edgeDir = 1rightV + 0upV
1051	local edgePerp = 0rightV + 1upV
1052	local cut = Instance.new("Part")
1053	cut.Size = Vector3.new(33.76, 1, 33.76)
1054	cut.CFrame = CFrame.fromMatrix(pos + 1 * 16.88 * edgePerp, edgeDir, normalV)
1055	cut.BrickColor = BrickColor.new("Bright orange")
1056	cut.Material = Enum.Material.Glacier
1057	cut.MaterialVariant = "2022 Stud"
1058	cut.Anchored = true; cut.Parent = workspace
1059	table.insert(angBoxes, cut)
1060	end
1061	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1062	if #cuts > 0 then
1063	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1064	for _, c in ipairs(cuts) do c:Destroy() end
1065	if ok and result then
1066	cyl:Destroy()
1067	result.Name = "Coil_0_4_B"; result.Anchored = true; result.Parent = model
1068	else
1069	cyl.Name = "Coil_0_4_B"; cyl.Parent = model
1070	end
1071	else
1072	cyl.Name = "Coil_0_4_B"; cyl.Parent = model
1073	end
1074	end
1075	do
1076	local rightV = Vector3.new(1,0,0).Unit
1077	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1078	local normalV = upV:Cross(rightV)
1079	local pos = Vector3.new(0, -2.74, 0.04)
1080	local cyl = Instance.new("Part")
1081	cyl.Shape = Enum.PartType.Cylinder
1082	cyl.Size = Vector3.new(0.8, 18.44, 18.44)
1083	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1084	cyl.BrickColor = BrickColor.new("Bright orange")
1085	cyl.Material = Enum.Material.Glacier
1086	cyl.MaterialVariant = "2022 Stud"
1087	cyl.Anchored = true; cyl.Parent = workspace
1088	local cuts = {}
1089	local hole = Instance.new("Part")
1090	hole.Shape = Enum.PartType.Cylinder
1091	hole.Size = Vector3.new(1, 16.84, 16.84)
1092	hole.CFrame = cyl.CFrame
1093	hole.BrickColor = BrickColor.new("Bright orange")
1094	hole.Material = Enum.Material.Glacier
1095	hole.MaterialVariant = "2022 Stud"
1096	hole.Anchored = true; hole.Parent = workspace
1097	table.insert(cuts, hole)
1098	local angBoxes = {}
1099	do
1100	local edgeDir = 1rightV + 0upV
1101	local edgePerp = 0rightV + 1upV
1102	local cut = Instance.new("Part")
1103	cut.Size = Vector3.new(36.88, 1, 36.88)
1104	cut.CFrame = CFrame.fromMatrix(pos + -1 * 18.44 * edgePerp, edgeDir, normalV)
1105	cut.BrickColor = BrickColor.new("Bright orange")
1106	cut.Material = Enum.Material.Glacier
1107	cut.MaterialVariant = "2022 Stud"
1108	cut.Anchored = true; cut.Parent = workspace
1109	table.insert(angBoxes, cut)
1110	end
1111	do
1112	local edgeDir = -1rightV + 0upV
1113	local edgePerp = 0rightV + -1upV
1114	local cut = Instance.new("Part")
1115	cut.Size = Vector3.new(36.88, 1, 36.88)
1116	cut.CFrame = CFrame.fromMatrix(pos + 1 * 18.44 * edgePerp, edgeDir, normalV)
1117	cut.BrickColor = BrickColor.new("Bright orange")
1118	cut.Material = Enum.Material.Glacier
1119	cut.MaterialVariant = "2022 Stud"
1120	cut.Anchored = true; cut.Parent = workspace
1121	table.insert(angBoxes, cut)
1122	end
1123	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1124	if #cuts > 0 then
1125	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1126	for _, c in ipairs(cuts) do c:Destroy() end
1127	if ok and result then
1128	cyl:Destroy()
1129	result.Name = "Coil_0_5_A"; result.Anchored = true; result.Parent = model
1130	else
1131	cyl.Name = "Coil_0_5_A"; cyl.Parent = model
1132	end
1133	else
1134	cyl.Name = "Coil_0_5_A"; cyl.Parent = model
1135	end
1136	end
1137	do
1138	local rightV = Vector3.new(1,0,0).Unit
1139	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1140	local normalV = upV:Cross(rightV)
1141	local pos = Vector3.new(0, -2.78, 0)
1142	local cyl = Instance.new("Part")
1143	cyl.Shape = Enum.PartType.Cylinder
1144	cyl.Size = Vector3.new(0.8, 18.44, 18.44)
1145	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1146	cyl.BrickColor = BrickColor.new("Bright orange")
1147	cyl.Material = Enum.Material.Glacier
1148	cyl.MaterialVariant = "2022 Stud"
1149	cyl.Anchored = true; cyl.Parent = workspace
1150	local cuts = {}
1151	local hole = Instance.new("Part")
1152	hole.Shape = Enum.PartType.Cylinder
1153	hole.Size = Vector3.new(1, 16.84, 16.84)
1154	hole.CFrame = cyl.CFrame
1155	hole.BrickColor = BrickColor.new("Bright orange")
1156	hole.Material = Enum.Material.Glacier
1157	hole.MaterialVariant = "2022 Stud"
1158	hole.Anchored = true; hole.Parent = workspace
1159	table.insert(cuts, hole)
1160	local angBoxes = {}
1161	do
1162	local edgeDir = -1rightV + 0upV
1163	local edgePerp = 0rightV + -1upV
1164	local cut = Instance.new("Part")
1165	cut.Size = Vector3.new(36.88, 1, 36.88)
1166	cut.CFrame = CFrame.fromMatrix(pos + -1 * 18.44 * edgePerp, edgeDir, normalV)
1167	cut.BrickColor = BrickColor.new("Bright orange")
1168	cut.Material = Enum.Material.Glacier
1169	cut.MaterialVariant = "2022 Stud"
1170	cut.Anchored = true; cut.Parent = workspace
1171	table.insert(angBoxes, cut)
1172	end
1173	do
1174	local edgeDir = 1rightV + 0upV
1175	local edgePerp = 0rightV + 1upV
1176	local cut = Instance.new("Part")
1177	cut.Size = Vector3.new(36.88, 1, 36.88)
1178	cut.CFrame = CFrame.fromMatrix(pos + 1 * 18.44 * edgePerp, edgeDir, normalV)
1179	cut.BrickColor = BrickColor.new("Bright orange")
1180	cut.Material = Enum.Material.Glacier
1181	cut.MaterialVariant = "2022 Stud"
1182	cut.Anchored = true; cut.Parent = workspace
1183	table.insert(angBoxes, cut)
1184	end
1185	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1186	if #cuts > 0 then
1187	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1188	for _, c in ipairs(cuts) do c:Destroy() end
1189	if ok and result then
1190	cyl:Destroy()
1191	result.Name = "Coil_0_5_B"; result.Anchored = true; result.Parent = model
1192	else
1193	cyl.Name = "Coil_0_5_B"; cyl.Parent = model
1194	end
1195	else
1196	cyl.Name = "Coil_0_5_B"; cyl.Parent = model
1197	end
1198	end
1199	do
1200	local rightV = Vector3.new(1,0,0).Unit
1201	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1202	local normalV = upV:Cross(rightV)
1203	local pos = Vector3.new(0, -1.52, 0.12)
1204	local cyl = Instance.new("Part")
1205	cyl.Shape = Enum.PartType.Cylinder
1206	cyl.Size = Vector3.new(0.8, 9.68, 9.68)
1207	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1208	cyl.BrickColor = BrickColor.new("Bright orange")
1209	cyl.Material = Enum.Material.Glacier
1210	cyl.MaterialVariant = "2022 Stud"
1211	cyl.Anchored = true; cyl.Parent = workspace
1212	local cuts = {}
1213	local hole = Instance.new("Part")
1214	hole.Shape = Enum.PartType.Cylinder
1215	hole.Size = Vector3.new(1, 8.08, 8.08)
1216	hole.CFrame = cyl.CFrame
1217	hole.BrickColor = BrickColor.new("Bright orange")
1218	hole.Material = Enum.Material.Glacier
1219	hole.MaterialVariant = "2022 Stud"
1220	hole.Anchored = true; hole.Parent = workspace
1221	table.insert(cuts, hole)
1222	local angBoxes = {}
1223	do
1224	local edgeDir = 1rightV + 0upV
1225	local edgePerp = 0rightV + 1upV
1226	local cut = Instance.new("Part")
1227	cut.Size = Vector3.new(19.36, 1, 19.36)
1228	cut.CFrame = CFrame.fromMatrix(pos + -1 * 9.68 * edgePerp, edgeDir, normalV)
1229	cut.BrickColor = BrickColor.new("Bright orange")
1230	cut.Material = Enum.Material.Glacier
1231	cut.MaterialVariant = "2022 Stud"
1232	cut.Anchored = true; cut.Parent = workspace
1233	table.insert(angBoxes, cut)
1234	end
1235	do
1236	local edgeDir = -1rightV + 0upV
1237	local edgePerp = 0rightV + -1upV
1238	local cut = Instance.new("Part")
1239	cut.Size = Vector3.new(19.36, 1, 19.36)
1240	cut.CFrame = CFrame.fromMatrix(pos + 1 * 9.68 * edgePerp, edgeDir, normalV)
1241	cut.BrickColor = BrickColor.new("Bright orange")
1242	cut.Material = Enum.Material.Glacier
1243	cut.MaterialVariant = "2022 Stud"
1244	cut.Anchored = true; cut.Parent = workspace
1245	table.insert(angBoxes, cut)
1246	end
1247	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1248	if #cuts > 0 then
1249	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1250	for _, c in ipairs(cuts) do c:Destroy() end
1251	if ok and result then
1252	cyl:Destroy()
1253	result.Name = "Coil_1_0_A"; result.Anchored = true; result.Parent = model
1254	else
1255	cyl.Name = "Coil_1_0_A"; cyl.Parent = model
1256	end
1257	else
1258	cyl.Name = "Coil_1_0_A"; cyl.Parent = model
1259	end
1260	end
1261	do
1262	local rightV = Vector3.new(1,0,0).Unit
1263	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1264	local normalV = upV:Cross(rightV)
1265	local pos = Vector3.new(0, -1.92, 0.08)
1266	local cyl = Instance.new("Part")
1267	cyl.Shape = Enum.PartType.Cylinder
1268	cyl.Size = Vector3.new(0.8, 9.68, 9.68)
1269	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1270	cyl.BrickColor = BrickColor.new("Bright orange")
1271	cyl.Material = Enum.Material.Glacier
1272	cyl.MaterialVariant = "2022 Stud"
1273	cyl.Anchored = true; cyl.Parent = workspace
1274	local cuts = {}
1275	local hole = Instance.new("Part")
1276	hole.Shape = Enum.PartType.Cylinder
1277	hole.Size = Vector3.new(1, 8.08, 8.08)
1278	hole.CFrame = cyl.CFrame
1279	hole.BrickColor = BrickColor.new("Bright orange")
1280	hole.Material = Enum.Material.Glacier
1281	hole.MaterialVariant = "2022 Stud"
1282	hole.Anchored = true; hole.Parent = workspace
1283	table.insert(cuts, hole)
1284	local angBoxes = {}
1285	do
1286	local edgeDir = -1rightV + 0upV
1287	local edgePerp = 0rightV + -1upV
1288	local cut = Instance.new("Part")
1289	cut.Size = Vector3.new(19.36, 1, 19.36)
1290	cut.CFrame = CFrame.fromMatrix(pos + -1 * 9.68 * edgePerp, edgeDir, normalV)
1291	cut.BrickColor = BrickColor.new("Bright orange")
1292	cut.Material = Enum.Material.Glacier
1293	cut.MaterialVariant = "2022 Stud"
1294	cut.Anchored = true; cut.Parent = workspace
1295	table.insert(angBoxes, cut)
1296	end
1297	do
1298	local edgeDir = 1rightV + 0upV
1299	local edgePerp = 0rightV + 1upV
1300	local cut = Instance.new("Part")
1301	cut.Size = Vector3.new(19.36, 1, 19.36)
1302	cut.CFrame = CFrame.fromMatrix(pos + 1 * 9.68 * edgePerp, edgeDir, normalV)
1303	cut.BrickColor = BrickColor.new("Bright orange")
1304	cut.Material = Enum.Material.Glacier
1305	cut.MaterialVariant = "2022 Stud"
1306	cut.Anchored = true; cut.Parent = workspace
1307	table.insert(angBoxes, cut)
1308	end
1309	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1310	if #cuts > 0 then
1311	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1312	for _, c in ipairs(cuts) do c:Destroy() end
1313	if ok and result then
1314	cyl:Destroy()
1315	result.Name = "Coil_1_0_B"; result.Anchored = true; result.Parent = model
1316	else
1317	cyl.Name = "Coil_1_0_B"; cyl.Parent = model
1318	end
1319	else
1320	cyl.Name = "Coil_1_0_B"; cyl.Parent = model
1321	end
1322	end
1323	do
1324	local rightV = Vector3.new(1,0,0).Unit
1325	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1326	local normalV = upV:Cross(rightV)
1327	local pos = Vector3.new(0, -1.56, 0.04)
1328	local cyl = Instance.new("Part")
1329	cyl.Shape = Enum.PartType.Cylinder
1330	cyl.Size = Vector3.new(0.8, 11.24, 11.24)
1331	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1332	cyl.BrickColor = BrickColor.new("Bright orange")
1333	cyl.Material = Enum.Material.Glacier
1334	cyl.MaterialVariant = "2022 Stud"
1335	cyl.Anchored = true; cyl.Parent = workspace
1336	local cuts = {}
1337	local hole = Instance.new("Part")
1338	hole.Shape = Enum.PartType.Cylinder
1339	hole.Size = Vector3.new(1, 9.64, 9.64)
1340	hole.CFrame = cyl.CFrame
1341	hole.BrickColor = BrickColor.new("Bright orange")
1342	hole.Material = Enum.Material.Glacier
1343	hole.MaterialVariant = "2022 Stud"
1344	hole.Anchored = true; hole.Parent = workspace
1345	table.insert(cuts, hole)
1346	local angBoxes = {}
1347	do
1348	local edgeDir = 1rightV + 0upV
1349	local edgePerp = 0rightV + 1upV
1350	local cut = Instance.new("Part")
1351	cut.Size = Vector3.new(22.48, 1, 22.48)
1352	cut.CFrame = CFrame.fromMatrix(pos + -1 * 11.24 * edgePerp, edgeDir, normalV)
1353	cut.BrickColor = BrickColor.new("Bright orange")
1354	cut.Material = Enum.Material.Glacier
1355	cut.MaterialVariant = "2022 Stud"
1356	cut.Anchored = true; cut.Parent = workspace
1357	table.insert(angBoxes, cut)
1358	end
1359	do
1360	local edgeDir = -1rightV + 0upV
1361	local edgePerp = 0rightV + -1upV
1362	local cut = Instance.new("Part")
1363	cut.Size = Vector3.new(22.48, 1, 22.48)
1364	cut.CFrame = CFrame.fromMatrix(pos + 1 * 11.24 * edgePerp, edgeDir, normalV)
1365	cut.BrickColor = BrickColor.new("Bright orange")
1366	cut.Material = Enum.Material.Glacier
1367	cut.MaterialVariant = "2022 Stud"
1368	cut.Anchored = true; cut.Parent = workspace
1369	table.insert(angBoxes, cut)
1370	end
1371	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1372	if #cuts > 0 then
1373	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1374	for _, c in ipairs(cuts) do c:Destroy() end
1375	if ok and result then
1376	cyl:Destroy()
1377	result.Name = "Coil_1_1_A"; result.Anchored = true; result.Parent = model
1378	else
1379	cyl.Name = "Coil_1_1_A"; cyl.Parent = model
1380	end
1381	else
1382	cyl.Name = "Coil_1_1_A"; cyl.Parent = model
1383	end
1384	end
1385	do
1386	local rightV = Vector3.new(1,0,0).Unit
1387	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1388	local normalV = upV:Cross(rightV)
1389	local pos = Vector3.new(0, -1.6, 0)
1390	local cyl = Instance.new("Part")
1391	cyl.Shape = Enum.PartType.Cylinder
1392	cyl.Size = Vector3.new(0.8, 11.24, 11.24)
1393	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1394	cyl.BrickColor = BrickColor.new("Bright orange")
1395	cyl.Material = Enum.Material.Glacier
1396	cyl.MaterialVariant = "2022 Stud"
1397	cyl.Anchored = true; cyl.Parent = workspace
1398	local cuts = {}
1399	local hole = Instance.new("Part")
1400	hole.Shape = Enum.PartType.Cylinder
1401	hole.Size = Vector3.new(1, 9.64, 9.64)
1402	hole.CFrame = cyl.CFrame
1403	hole.BrickColor = BrickColor.new("Bright orange")
1404	hole.Material = Enum.Material.Glacier
1405	hole.MaterialVariant = "2022 Stud"
1406	hole.Anchored = true; hole.Parent = workspace
1407	table.insert(cuts, hole)
1408	local angBoxes = {}
1409	do
1410	local edgeDir = -1rightV + 0upV
1411	local edgePerp = 0rightV + -1upV
1412	local cut = Instance.new("Part")
1413	cut.Size = Vector3.new(22.48, 1, 22.48)
1414	cut.CFrame = CFrame.fromMatrix(pos + -1 * 11.24 * edgePerp, edgeDir, normalV)
1415	cut.BrickColor = BrickColor.new("Bright orange")
1416	cut.Material = Enum.Material.Glacier
1417	cut.MaterialVariant = "2022 Stud"
1418	cut.Anchored = true; cut.Parent = workspace
1419	table.insert(angBoxes, cut)
1420	end
1421	do
1422	local edgeDir = 1rightV + 0upV
1423	local edgePerp = 0rightV + 1upV
1424	local cut = Instance.new("Part")
1425	cut.Size = Vector3.new(22.48, 1, 22.48)
1426	cut.CFrame = CFrame.fromMatrix(pos + 1 * 11.24 * edgePerp, edgeDir, normalV)
1427	cut.BrickColor = BrickColor.new("Bright orange")
1428	cut.Material = Enum.Material.Glacier
1429	cut.MaterialVariant = "2022 Stud"
1430	cut.Anchored = true; cut.Parent = workspace
1431	table.insert(angBoxes, cut)
1432	end
1433	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1434	if #cuts > 0 then
1435	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1436	for _, c in ipairs(cuts) do c:Destroy() end
1437	if ok and result then
1438	cyl:Destroy()
1439	result.Name = "Coil_1_1_B"; result.Anchored = true; result.Parent = model
1440	else
1441	cyl.Name = "Coil_1_1_B"; cyl.Parent = model
1442	end
1443	else
1444	cyl.Name = "Coil_1_1_B"; cyl.Parent = model
1445	end
1446	end
1447	do
1448	local rightV = Vector3.new(1,0,0).Unit
1449	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1450	local normalV = upV:Cross(rightV)
1451	local pos = Vector3.new(0, -1.64, 0.04)
1452	local cyl = Instance.new("Part")
1453	cyl.Shape = Enum.PartType.Cylinder
1454	cyl.Size = Vector3.new(0.8, 13.2, 13.2)
1455	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1456	cyl.BrickColor = BrickColor.new("Bright orange")
1457	cyl.Material = Enum.Material.Glacier
1458	cyl.MaterialVariant = "2022 Stud"
1459	cyl.Anchored = true; cyl.Parent = workspace
1460	local cuts = {}
1461	local hole = Instance.new("Part")
1462	hole.Shape = Enum.PartType.Cylinder
1463	hole.Size = Vector3.new(1, 11.6, 11.6)
1464	hole.CFrame = cyl.CFrame
1465	hole.BrickColor = BrickColor.new("Bright orange")
1466	hole.Material = Enum.Material.Glacier
1467	hole.MaterialVariant = "2022 Stud"
1468	hole.Anchored = true; hole.Parent = workspace
1469	table.insert(cuts, hole)
1470	local angBoxes = {}
1471	do
1472	local edgeDir = 1rightV + 0upV
1473	local edgePerp = 0rightV + 1upV
1474	local cut = Instance.new("Part")
1475	cut.Size = Vector3.new(26.4, 1, 26.4)
1476	cut.CFrame = CFrame.fromMatrix(pos + -1 * 13.2 * edgePerp, edgeDir, normalV)
1477	cut.BrickColor = BrickColor.new("Bright orange")
1478	cut.Material = Enum.Material.Glacier
1479	cut.MaterialVariant = "2022 Stud"
1480	cut.Anchored = true; cut.Parent = workspace
1481	table.insert(angBoxes, cut)
1482	end
1483	do
1484	local edgeDir = -1rightV + 0upV
1485	local edgePerp = 0rightV + -1upV
1486	local cut = Instance.new("Part")
1487	cut.Size = Vector3.new(26.4, 1, 26.4)
1488	cut.CFrame = CFrame.fromMatrix(pos + 1 * 13.2 * edgePerp, edgeDir, normalV)
1489	cut.BrickColor = BrickColor.new("Bright orange")
1490	cut.Material = Enum.Material.Glacier
1491	cut.MaterialVariant = "2022 Stud"
1492	cut.Anchored = true; cut.Parent = workspace
1493	table.insert(angBoxes, cut)
1494	end
1495	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1496	if #cuts > 0 then
1497	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1498	for _, c in ipairs(cuts) do c:Destroy() end
1499	if ok and result then
1500	cyl:Destroy()
1501	result.Name = "Coil_1_2_A"; result.Anchored = true; result.Parent = model
1502	else
1503	cyl.Name = "Coil_1_2_A"; cyl.Parent = model
1504	end
1505	else
1506	cyl.Name = "Coil_1_2_A"; cyl.Parent = model
1507	end
1508	end
1509	do
1510	local rightV = Vector3.new(1,0,0).Unit
1511	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1512	local normalV = upV:Cross(rightV)
1513	local pos = Vector3.new(0, -1.68, 0)
1514	local cyl = Instance.new("Part")
1515	cyl.Shape = Enum.PartType.Cylinder
1516	cyl.Size = Vector3.new(0.8, 13.2, 13.2)
1517	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1518	cyl.BrickColor = BrickColor.new("Bright orange")
1519	cyl.Material = Enum.Material.Glacier
1520	cyl.MaterialVariant = "2022 Stud"
1521	cyl.Anchored = true; cyl.Parent = workspace
1522	local cuts = {}
1523	local hole = Instance.new("Part")
1524	hole.Shape = Enum.PartType.Cylinder
1525	hole.Size = Vector3.new(1, 11.6, 11.6)
1526	hole.CFrame = cyl.CFrame
1527	hole.BrickColor = BrickColor.new("Bright orange")
1528	hole.Material = Enum.Material.Glacier
1529	hole.MaterialVariant = "2022 Stud"
1530	hole.Anchored = true; hole.Parent = workspace
1531	table.insert(cuts, hole)
1532	local angBoxes = {}
1533	do
1534	local edgeDir = -1rightV + 0upV
1535	local edgePerp = 0rightV + -1upV
1536	local cut = Instance.new("Part")
1537	cut.Size = Vector3.new(26.4, 1, 26.4)
1538	cut.CFrame = CFrame.fromMatrix(pos + -1 * 13.2 * edgePerp, edgeDir, normalV)
1539	cut.BrickColor = BrickColor.new("Bright orange")
1540	cut.Material = Enum.Material.Glacier
1541	cut.MaterialVariant = "2022 Stud"
1542	cut.Anchored = true; cut.Parent = workspace
1543	table.insert(angBoxes, cut)
1544	end
1545	do
1546	local edgeDir = 1rightV + 0upV
1547	local edgePerp = 0rightV + 1upV
1548	local cut = Instance.new("Part")
1549	cut.Size = Vector3.new(26.4, 1, 26.4)
1550	cut.CFrame = CFrame.fromMatrix(pos + 1 * 13.2 * edgePerp, edgeDir, normalV)
1551	cut.BrickColor = BrickColor.new("Bright orange")
1552	cut.Material = Enum.Material.Glacier
1553	cut.MaterialVariant = "2022 Stud"
1554	cut.Anchored = true; cut.Parent = workspace
1555	table.insert(angBoxes, cut)
1556	end
1557	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1558	if #cuts > 0 then
1559	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1560	for _, c in ipairs(cuts) do c:Destroy() end
1561	if ok and result then
1562	cyl:Destroy()
1563	result.Name = "Coil_1_2_B"; result.Anchored = true; result.Parent = model
1564	else
1565	cyl.Name = "Coil_1_2_B"; cyl.Parent = model
1566	end
1567	else
1568	cyl.Name = "Coil_1_2_B"; cyl.Parent = model
1569	end
1570	end
1571	do
1572	local rightV = Vector3.new(1,0,0).Unit
1573	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1574	local normalV = upV:Cross(rightV)
1575	local pos = Vector3.new(0, -1.76, 0.12)
1576	local cyl = Instance.new("Part")
1577	cyl.Shape = Enum.PartType.Cylinder
1578	cyl.Size = Vector3.new(0.8, 15.16, 15.16)
1579	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1580	cyl.BrickColor = BrickColor.new("Bright orange")
1581	cyl.Material = Enum.Material.Glacier
1582	cyl.MaterialVariant = "2022 Stud"
1583	cyl.Anchored = true; cyl.Parent = workspace
1584	local cuts = {}
1585	local hole = Instance.new("Part")
1586	hole.Shape = Enum.PartType.Cylinder
1587	hole.Size = Vector3.new(1, 13.56, 13.56)
1588	hole.CFrame = cyl.CFrame
1589	hole.BrickColor = BrickColor.new("Bright orange")
1590	hole.Material = Enum.Material.Glacier
1591	hole.MaterialVariant = "2022 Stud"
1592	hole.Anchored = true; hole.Parent = workspace
1593	table.insert(cuts, hole)
1594	local angBoxes = {}
1595	do
1596	local edgeDir = 1rightV + 0upV
1597	local edgePerp = 0rightV + 1upV
1598	local cut = Instance.new("Part")
1599	cut.Size = Vector3.new(30.32, 1, 30.32)
1600	cut.CFrame = CFrame.fromMatrix(pos + -1 * 15.16 * edgePerp, edgeDir, normalV)
1601	cut.BrickColor = BrickColor.new("Bright orange")
1602	cut.Material = Enum.Material.Glacier
1603	cut.MaterialVariant = "2022 Stud"
1604	cut.Anchored = true; cut.Parent = workspace
1605	table.insert(angBoxes, cut)
1606	end
1607	do
1608	local edgeDir = -1rightV + 0upV
1609	local edgePerp = 0rightV + -1upV
1610	local cut = Instance.new("Part")
1611	cut.Size = Vector3.new(30.32, 1, 30.32)
1612	cut.CFrame = CFrame.fromMatrix(pos + 1 * 15.16 * edgePerp, edgeDir, normalV)
1613	cut.BrickColor = BrickColor.new("Bright orange")
1614	cut.Material = Enum.Material.Glacier
1615	cut.MaterialVariant = "2022 Stud"
1616	cut.Anchored = true; cut.Parent = workspace
1617	table.insert(angBoxes, cut)
1618	end
1619	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1620	if #cuts > 0 then
1621	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1622	for _, c in ipairs(cuts) do c:Destroy() end
1623	if ok and result then
1624	cyl:Destroy()
1625	result.Name = "Coil_1_3_A"; result.Anchored = true; result.Parent = model
1626	else
1627	cyl.Name = "Coil_1_3_A"; cyl.Parent = model
1628	end
1629	else
1630	cyl.Name = "Coil_1_3_A"; cyl.Parent = model
1631	end
1632	end
1633	do
1634	local rightV = Vector3.new(1,0,0).Unit
1635	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1636	local normalV = upV:Cross(rightV)
1637	local pos = Vector3.new(0, -1.84, 0.08)
1638	local cyl = Instance.new("Part")
1639	cyl.Shape = Enum.PartType.Cylinder
1640	cyl.Size = Vector3.new(0.8, 15.16, 15.16)
1641	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1642	cyl.BrickColor = BrickColor.new("Bright orange")
1643	cyl.Material = Enum.Material.Glacier
1644	cyl.MaterialVariant = "2022 Stud"
1645	cyl.Anchored = true; cyl.Parent = workspace
1646	local cuts = {}
1647	local hole = Instance.new("Part")
1648	hole.Shape = Enum.PartType.Cylinder
1649	hole.Size = Vector3.new(1, 13.56, 13.56)
1650	hole.CFrame = cyl.CFrame
1651	hole.BrickColor = BrickColor.new("Bright orange")
1652	hole.Material = Enum.Material.Glacier
1653	hole.MaterialVariant = "2022 Stud"
1654	hole.Anchored = true; hole.Parent = workspace
1655	table.insert(cuts, hole)
1656	local angBoxes = {}
1657	do
1658	local edgeDir = -1rightV + 0upV
1659	local edgePerp = 0rightV + -1upV
1660	local cut = Instance.new("Part")
1661	cut.Size = Vector3.new(30.32, 1, 30.32)
1662	cut.CFrame = CFrame.fromMatrix(pos + -1 * 15.16 * edgePerp, edgeDir, normalV)
1663	cut.BrickColor = BrickColor.new("Bright orange")
1664	cut.Material = Enum.Material.Glacier
1665	cut.MaterialVariant = "2022 Stud"
1666	cut.Anchored = true; cut.Parent = workspace
1667	table.insert(angBoxes, cut)
1668	end
1669	do
1670	local edgeDir = 1rightV + 0upV
1671	local edgePerp = 0rightV + 1upV
1672	local cut = Instance.new("Part")
1673	cut.Size = Vector3.new(30.32, 1, 30.32)
1674	cut.CFrame = CFrame.fromMatrix(pos + 1 * 15.16 * edgePerp, edgeDir, normalV)
1675	cut.BrickColor = BrickColor.new("Bright orange")
1676	cut.Material = Enum.Material.Glacier
1677	cut.MaterialVariant = "2022 Stud"
1678	cut.Anchored = true; cut.Parent = workspace
1679	table.insert(angBoxes, cut)
1680	end
1681	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1682	if #cuts > 0 then
1683	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1684	for _, c in ipairs(cuts) do c:Destroy() end
1685	if ok and result then
1686	cyl:Destroy()
1687	result.Name = "Coil_1_3_B"; result.Anchored = true; result.Parent = model
1688	else
1689	cyl.Name = "Coil_1_3_B"; cyl.Parent = model
1690	end
1691	else
1692	cyl.Name = "Coil_1_3_B"; cyl.Parent = model
1693	end
1694	end
1695	do
1696	local rightV = Vector3.new(1,0,0).Unit
1697	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1698	local normalV = upV:Cross(rightV)
1699	local pos = Vector3.new(0, -1.72, 0.04)
1700	local cyl = Instance.new("Part")
1701	cyl.Shape = Enum.PartType.Cylinder
1702	cyl.Size = Vector3.new(0.8, 16.72, 16.72)
1703	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1704	cyl.BrickColor = BrickColor.new("Bright orange")
1705	cyl.Material = Enum.Material.Glacier
1706	cyl.MaterialVariant = "2022 Stud"
1707	cyl.Anchored = true; cyl.Parent = workspace
1708	local cuts = {}
1709	local hole = Instance.new("Part")
1710	hole.Shape = Enum.PartType.Cylinder
1711	hole.Size = Vector3.new(1, 15.12, 15.12)
1712	hole.CFrame = cyl.CFrame
1713	hole.BrickColor = BrickColor.new("Bright orange")
1714	hole.Material = Enum.Material.Glacier
1715	hole.MaterialVariant = "2022 Stud"
1716	hole.Anchored = true; hole.Parent = workspace
1717	table.insert(cuts, hole)
1718	local angBoxes = {}
1719	do
1720	local edgeDir = 1rightV + 0upV
1721	local edgePerp = 0rightV + 1upV
1722	local cut = Instance.new("Part")
1723	cut.Size = Vector3.new(33.44, 1, 33.44)
1724	cut.CFrame = CFrame.fromMatrix(pos + -1 * 16.72 * edgePerp, edgeDir, normalV)
1725	cut.BrickColor = BrickColor.new("Bright orange")
1726	cut.Material = Enum.Material.Glacier
1727	cut.MaterialVariant = "2022 Stud"
1728	cut.Anchored = true; cut.Parent = workspace
1729	table.insert(angBoxes, cut)
1730	end
1731	do
1732	local edgeDir = -1rightV + 0upV
1733	local edgePerp = 0rightV + -1upV
1734	local cut = Instance.new("Part")
1735	cut.Size = Vector3.new(33.44, 1, 33.44)
1736	cut.CFrame = CFrame.fromMatrix(pos + 1 * 16.72 * edgePerp, edgeDir, normalV)
1737	cut.BrickColor = BrickColor.new("Bright orange")
1738	cut.Material = Enum.Material.Glacier
1739	cut.MaterialVariant = "2022 Stud"
1740	cut.Anchored = true; cut.Parent = workspace
1741	table.insert(angBoxes, cut)
1742	end
1743	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1744	if #cuts > 0 then
1745	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1746	for _, c in ipairs(cuts) do c:Destroy() end
1747	if ok and result then
1748	cyl:Destroy()
1749	result.Name = "Coil_1_4_A"; result.Anchored = true; result.Parent = model
1750	else
1751	cyl.Name = "Coil_1_4_A"; cyl.Parent = model
1752	end
1753	else
1754	cyl.Name = "Coil_1_4_A"; cyl.Parent = model
1755	end
1756	end
1757	do
1758	local rightV = Vector3.new(1,0,0).Unit
1759	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1760	local normalV = upV:Cross(rightV)
1761	local pos = Vector3.new(0, -1.8, 0)
1762	local cyl = Instance.new("Part")
1763	cyl.Shape = Enum.PartType.Cylinder
1764	cyl.Size = Vector3.new(0.8, 16.72, 16.72)
1765	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1766	cyl.BrickColor = BrickColor.new("Bright orange")
1767	cyl.Material = Enum.Material.Glacier
1768	cyl.MaterialVariant = "2022 Stud"
1769	cyl.Anchored = true; cyl.Parent = workspace
1770	local cuts = {}
1771	local hole = Instance.new("Part")
1772	hole.Shape = Enum.PartType.Cylinder
1773	hole.Size = Vector3.new(1, 15.12, 15.12)
1774	hole.CFrame = cyl.CFrame
1775	hole.BrickColor = BrickColor.new("Bright orange")
1776	hole.Material = Enum.Material.Glacier
1777	hole.MaterialVariant = "2022 Stud"
1778	hole.Anchored = true; hole.Parent = workspace
1779	table.insert(cuts, hole)
1780	local angBoxes = {}
1781	do
1782	local edgeDir = -1rightV + 0upV
1783	local edgePerp = 0rightV + -1upV
1784	local cut = Instance.new("Part")
1785	cut.Size = Vector3.new(33.44, 1, 33.44)
1786	cut.CFrame = CFrame.fromMatrix(pos + -1 * 16.72 * edgePerp, edgeDir, normalV)
1787	cut.BrickColor = BrickColor.new("Bright orange")
1788	cut.Material = Enum.Material.Glacier
1789	cut.MaterialVariant = "2022 Stud"
1790	cut.Anchored = true; cut.Parent = workspace
1791	table.insert(angBoxes, cut)
1792	end
1793	do
1794	local edgeDir = 1rightV + 0upV
1795	local edgePerp = 0rightV + 1upV
1796	local cut = Instance.new("Part")
1797	cut.Size = Vector3.new(33.44, 1, 33.44)
1798	cut.CFrame = CFrame.fromMatrix(pos + 1 * 16.72 * edgePerp, edgeDir, normalV)
1799	cut.BrickColor = BrickColor.new("Bright orange")
1800	cut.Material = Enum.Material.Glacier
1801	cut.MaterialVariant = "2022 Stud"
1802	cut.Anchored = true; cut.Parent = workspace
1803	table.insert(angBoxes, cut)
1804	end
1805	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1806	if #cuts > 0 then
1807	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1808	for _, c in ipairs(cuts) do c:Destroy() end
1809	if ok and result then
1810	cyl:Destroy()
1811	result.Name = "Coil_1_4_B"; result.Anchored = true; result.Parent = model
1812	else
1813	cyl.Name = "Coil_1_4_B"; cyl.Parent = model
1814	end
1815	else
1816	cyl.Name = "Coil_1_4_B"; cyl.Parent = model
1817	end
1818	end
1819	do
1820	local rightV = Vector3.new(1,0,0).Unit
1821	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1822	local normalV = upV:Cross(rightV)
1823	local pos = Vector3.new(0, -1.84, 0.04)
1824	local cyl = Instance.new("Part")
1825	cyl.Shape = Enum.PartType.Cylinder
1826	cyl.Size = Vector3.new(0.8, 18.68, 18.68)
1827	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1828	cyl.BrickColor = BrickColor.new("Bright orange")
1829	cyl.Material = Enum.Material.Glacier
1830	cyl.MaterialVariant = "2022 Stud"
1831	cyl.Anchored = true; cyl.Parent = workspace
1832	local cuts = {}
1833	local hole = Instance.new("Part")
1834	hole.Shape = Enum.PartType.Cylinder
1835	hole.Size = Vector3.new(1, 17.08, 17.08)
1836	hole.CFrame = cyl.CFrame
1837	hole.BrickColor = BrickColor.new("Bright orange")
1838	hole.Material = Enum.Material.Glacier
1839	hole.MaterialVariant = "2022 Stud"
1840	hole.Anchored = true; hole.Parent = workspace
1841	table.insert(cuts, hole)
1842	local angBoxes = {}
1843	do
1844	local edgeDir = 1rightV + 0upV
1845	local edgePerp = 0rightV + 1upV
1846	local cut = Instance.new("Part")
1847	cut.Size = Vector3.new(37.36, 1, 37.36)
1848	cut.CFrame = CFrame.fromMatrix(pos + -1 * 18.68 * edgePerp, edgeDir, normalV)
1849	cut.BrickColor = BrickColor.new("Bright orange")
1850	cut.Material = Enum.Material.Glacier
1851	cut.MaterialVariant = "2022 Stud"
1852	cut.Anchored = true; cut.Parent = workspace
1853	table.insert(angBoxes, cut)
1854	end
1855	do
1856	local edgeDir = -1rightV + 0upV
1857	local edgePerp = 0rightV + -1upV
1858	local cut = Instance.new("Part")
1859	cut.Size = Vector3.new(37.36, 1, 37.36)
1860	cut.CFrame = CFrame.fromMatrix(pos + 1 * 18.68 * edgePerp, edgeDir, normalV)
1861	cut.BrickColor = BrickColor.new("Bright orange")
1862	cut.Material = Enum.Material.Glacier
1863	cut.MaterialVariant = "2022 Stud"
1864	cut.Anchored = true; cut.Parent = workspace
1865	table.insert(angBoxes, cut)
1866	end
1867	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1868	if #cuts > 0 then
1869	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1870	for _, c in ipairs(cuts) do c:Destroy() end
1871	if ok and result then
1872	cyl:Destroy()
1873	result.Name = "Coil_1_5_A"; result.Anchored = true; result.Parent = model
1874	else
1875	cyl.Name = "Coil_1_5_A"; cyl.Parent = model
1876	end
1877	else
1878	cyl.Name = "Coil_1_5_A"; cyl.Parent = model
1879	end
1880	end
1881	do
1882	local rightV = Vector3.new(1,0,0).Unit
1883	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1884	local normalV = upV:Cross(rightV)
1885	local pos = Vector3.new(0, -1.88, 0)
1886	local cyl = Instance.new("Part")
1887	cyl.Shape = Enum.PartType.Cylinder
1888	cyl.Size = Vector3.new(0.8, 18.68, 18.68)
1889	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1890	cyl.BrickColor = BrickColor.new("Bright orange")
1891	cyl.Material = Enum.Material.Glacier
1892	cyl.MaterialVariant = "2022 Stud"
1893	cyl.Anchored = true; cyl.Parent = workspace
1894	local cuts = {}
1895	local hole = Instance.new("Part")
1896	hole.Shape = Enum.PartType.Cylinder
1897	hole.Size = Vector3.new(1, 17.08, 17.08)
1898	hole.CFrame = cyl.CFrame
1899	hole.BrickColor = BrickColor.new("Bright orange")
1900	hole.Material = Enum.Material.Glacier
1901	hole.MaterialVariant = "2022 Stud"
1902	hole.Anchored = true; hole.Parent = workspace
1903	table.insert(cuts, hole)
1904	local angBoxes = {}
1905	do
1906	local edgeDir = -1rightV + 0upV
1907	local edgePerp = 0rightV + -1upV
1908	local cut = Instance.new("Part")
1909	cut.Size = Vector3.new(37.36, 1, 37.36)
1910	cut.CFrame = CFrame.fromMatrix(pos + -1 * 18.68 * edgePerp, edgeDir, normalV)
1911	cut.BrickColor = BrickColor.new("Bright orange")
1912	cut.Material = Enum.Material.Glacier
1913	cut.MaterialVariant = "2022 Stud"
1914	cut.Anchored = true; cut.Parent = workspace
1915	table.insert(angBoxes, cut)
1916	end
1917	do
1918	local edgeDir = 1rightV + 0upV
1919	local edgePerp = 0rightV + 1upV
1920	local cut = Instance.new("Part")
1921	cut.Size = Vector3.new(37.36, 1, 37.36)
1922	cut.CFrame = CFrame.fromMatrix(pos + 1 * 18.68 * edgePerp, edgeDir, normalV)
1923	cut.BrickColor = BrickColor.new("Bright orange")
1924	cut.Material = Enum.Material.Glacier
1925	cut.MaterialVariant = "2022 Stud"
1926	cut.Anchored = true; cut.Parent = workspace
1927	table.insert(angBoxes, cut)
1928	end
1929	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1930	if #cuts > 0 then
1931	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1932	for _, c in ipairs(cuts) do c:Destroy() end
1933	if ok and result then
1934	cyl:Destroy()
1935	result.Name = "Coil_1_5_B"; result.Anchored = true; result.Parent = model
1936	else
1937	cyl.Name = "Coil_1_5_B"; cyl.Parent = model
1938	end
1939	else
1940	cyl.Name = "Coil_1_5_B"; cyl.Parent = model
1941	end
1942	end
1943	do
1944	local rightV = Vector3.new(1,0,0).Unit
1945	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
1946	local normalV = upV:Cross(rightV)
1947	local pos = Vector3.new(0, -1.22, 0.04)
1948	local cyl = Instance.new("Part")
1949	cyl.Shape = Enum.PartType.Cylinder
1950	cyl.Size = Vector3.new(0.8, 9.52, 9.52)
1951	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
1952	cyl.BrickColor = BrickColor.new("Bright orange")
1953	cyl.Material = Enum.Material.Glacier
1954	cyl.MaterialVariant = "2022 Stud"
1955	cyl.Anchored = true; cyl.Parent = workspace
1956	local cuts = {}
1957	local hole = Instance.new("Part")
1958	hole.Shape = Enum.PartType.Cylinder
1959	hole.Size = Vector3.new(1, 7.92, 7.92)
1960	hole.CFrame = cyl.CFrame
1961	hole.BrickColor = BrickColor.new("Bright orange")
1962	hole.Material = Enum.Material.Glacier
1963	hole.MaterialVariant = "2022 Stud"
1964	hole.Anchored = true; hole.Parent = workspace
1965	table.insert(cuts, hole)
1966	local angBoxes = {}
1967	do
1968	local edgeDir = 1rightV + 0upV
1969	local edgePerp = 0rightV + 1upV
1970	local cut = Instance.new("Part")
1971	cut.Size = Vector3.new(19.04, 1, 19.04)
1972	cut.CFrame = CFrame.fromMatrix(pos + -1 * 9.52 * edgePerp, edgeDir, normalV)
1973	cut.BrickColor = BrickColor.new("Bright orange")
1974	cut.Material = Enum.Material.Glacier
1975	cut.MaterialVariant = "2022 Stud"
1976	cut.Anchored = true; cut.Parent = workspace
1977	table.insert(angBoxes, cut)
1978	end
1979	do
1980	local edgeDir = -1rightV + 0upV
1981	local edgePerp = 0rightV + -1upV
1982	local cut = Instance.new("Part")
1983	cut.Size = Vector3.new(19.04, 1, 19.04)
1984	cut.CFrame = CFrame.fromMatrix(pos + 1 * 9.52 * edgePerp, edgeDir, normalV)
1985	cut.BrickColor = BrickColor.new("Bright orange")
1986	cut.Material = Enum.Material.Glacier
1987	cut.MaterialVariant = "2022 Stud"
1988	cut.Anchored = true; cut.Parent = workspace
1989	table.insert(angBoxes, cut)
1990	end
1991	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
1992	if #cuts > 0 then
1993	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
1994	for _, c in ipairs(cuts) do c:Destroy() end
1995	if ok and result then
1996	cyl:Destroy()
1997	result.Name = "Coil_2_0_A"; result.Anchored = true; result.Parent = model
1998	else
1999	cyl.Name = "Coil_2_0_A"; cyl.Parent = model
2000	end
2001	else
2002	cyl.Name = "Coil_2_0_A"; cyl.Parent = model
2003	end
2004	end
2005	do
2006	local rightV = Vector3.new(1,0,0).Unit
2007	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2008	local normalV = upV:Cross(rightV)
2009	local pos = Vector3.new(0, -1.18, 0)
2010	local cyl = Instance.new("Part")
2011	cyl.Shape = Enum.PartType.Cylinder
2012	cyl.Size = Vector3.new(0.8, 9.52, 9.52)
2013	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2014	cyl.BrickColor = BrickColor.new("Bright orange")
2015	cyl.Material = Enum.Material.Glacier
2016	cyl.MaterialVariant = "2022 Stud"
2017	cyl.Anchored = true; cyl.Parent = workspace
2018	local cuts = {}
2019	local hole = Instance.new("Part")
2020	hole.Shape = Enum.PartType.Cylinder
2021	hole.Size = Vector3.new(1, 7.92, 7.92)
2022	hole.CFrame = cyl.CFrame
2023	hole.BrickColor = BrickColor.new("Bright orange")
2024	hole.Material = Enum.Material.Glacier
2025	hole.MaterialVariant = "2022 Stud"
2026	hole.Anchored = true; hole.Parent = workspace
2027	table.insert(cuts, hole)
2028	local angBoxes = {}
2029	do
2030	local edgeDir = -1rightV + 0upV
2031	local edgePerp = 0rightV + -1upV
2032	local cut = Instance.new("Part")
2033	cut.Size = Vector3.new(19.04, 1, 19.04)
2034	cut.CFrame = CFrame.fromMatrix(pos + -1 * 9.52 * edgePerp, edgeDir, normalV)
2035	cut.BrickColor = BrickColor.new("Bright orange")
2036	cut.Material = Enum.Material.Glacier
2037	cut.MaterialVariant = "2022 Stud"
2038	cut.Anchored = true; cut.Parent = workspace
2039	table.insert(angBoxes, cut)
2040	end
2041	do
2042	local edgeDir = 1rightV + 0upV
2043	local edgePerp = 0rightV + 1upV
2044	local cut = Instance.new("Part")
2045	cut.Size = Vector3.new(19.04, 1, 19.04)
2046	cut.CFrame = CFrame.fromMatrix(pos + 1 * 9.52 * edgePerp, edgeDir, normalV)
2047	cut.BrickColor = BrickColor.new("Bright orange")
2048	cut.Material = Enum.Material.Glacier
2049	cut.MaterialVariant = "2022 Stud"
2050	cut.Anchored = true; cut.Parent = workspace
2051	table.insert(angBoxes, cut)
2052	end
2053	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2054	if #cuts > 0 then
2055	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2056	for _, c in ipairs(cuts) do c:Destroy() end
2057	if ok and result then
2058	cyl:Destroy()
2059	result.Name = "Coil_2_0_B"; result.Anchored = true; result.Parent = model
2060	else
2061	cyl.Name = "Coil_2_0_B"; cyl.Parent = model
2062	end
2063	else
2064	cyl.Name = "Coil_2_0_B"; cyl.Parent = model
2065	end
2066	end
2067	do
2068	local rightV = Vector3.new(1,0,0).Unit
2069	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2070	local normalV = upV:Cross(rightV)
2071	local pos = Vector3.new(0, -1.14, 0.12)
2072	local cyl = Instance.new("Part")
2073	cyl.Shape = Enum.PartType.Cylinder
2074	cyl.Size = Vector3.new(0.8, 11.48, 11.48)
2075	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2076	cyl.BrickColor = BrickColor.new("Bright orange")
2077	cyl.Material = Enum.Material.Glacier
2078	cyl.MaterialVariant = "2022 Stud"
2079	cyl.Anchored = true; cyl.Parent = workspace
2080	local cuts = {}
2081	local hole = Instance.new("Part")
2082	hole.Shape = Enum.PartType.Cylinder
2083	hole.Size = Vector3.new(1, 9.88, 9.88)
2084	hole.CFrame = cyl.CFrame
2085	hole.BrickColor = BrickColor.new("Bright orange")
2086	hole.Material = Enum.Material.Glacier
2087	hole.MaterialVariant = "2022 Stud"
2088	hole.Anchored = true; hole.Parent = workspace
2089	table.insert(cuts, hole)
2090	local angBoxes = {}
2091	do
2092	local edgeDir = 1rightV + 0upV
2093	local edgePerp = 0rightV + 1upV
2094	local cut = Instance.new("Part")
2095	cut.Size = Vector3.new(22.96, 1, 22.96)
2096	cut.CFrame = CFrame.fromMatrix(pos + -1 * 11.48 * edgePerp, edgeDir, normalV)
2097	cut.BrickColor = BrickColor.new("Bright orange")
2098	cut.Material = Enum.Material.Glacier
2099	cut.MaterialVariant = "2022 Stud"
2100	cut.Anchored = true; cut.Parent = workspace
2101	table.insert(angBoxes, cut)
2102	end
2103	do
2104	local edgeDir = -1rightV + 0upV
2105	local edgePerp = 0rightV + -1upV
2106	local cut = Instance.new("Part")
2107	cut.Size = Vector3.new(22.96, 1, 22.96)
2108	cut.CFrame = CFrame.fromMatrix(pos + 1 * 11.48 * edgePerp, edgeDir, normalV)
2109	cut.BrickColor = BrickColor.new("Bright orange")
2110	cut.Material = Enum.Material.Glacier
2111	cut.MaterialVariant = "2022 Stud"
2112	cut.Anchored = true; cut.Parent = workspace
2113	table.insert(angBoxes, cut)
2114	end
2115	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2116	if #cuts > 0 then
2117	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2118	for _, c in ipairs(cuts) do c:Destroy() end
2119	if ok and result then
2120	cyl:Destroy()
2121	result.Name = "Coil_2_1_A"; result.Anchored = true; result.Parent = model
2122	else
2123	cyl.Name = "Coil_2_1_A"; cyl.Parent = model
2124	end
2125	else
2126	cyl.Name = "Coil_2_1_A"; cyl.Parent = model
2127	end
2128	end
2129	do
2130	local rightV = Vector3.new(1,0,0).Unit
2131	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2132	local normalV = upV:Cross(rightV)
2133	local pos = Vector3.new(0, -1.1, 0.08)
2134	local cyl = Instance.new("Part")
2135	cyl.Shape = Enum.PartType.Cylinder
2136	cyl.Size = Vector3.new(0.8, 11.48, 11.48)
2137	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2138	cyl.BrickColor = BrickColor.new("Bright orange")
2139	cyl.Material = Enum.Material.Glacier
2140	cyl.MaterialVariant = "2022 Stud"
2141	cyl.Anchored = true; cyl.Parent = workspace
2142	local cuts = {}
2143	local hole = Instance.new("Part")
2144	hole.Shape = Enum.PartType.Cylinder
2145	hole.Size = Vector3.new(1, 9.88, 9.88)
2146	hole.CFrame = cyl.CFrame
2147	hole.BrickColor = BrickColor.new("Bright orange")
2148	hole.Material = Enum.Material.Glacier
2149	hole.MaterialVariant = "2022 Stud"
2150	hole.Anchored = true; hole.Parent = workspace
2151	table.insert(cuts, hole)
2152	local angBoxes = {}
2153	do
2154	local edgeDir = -1rightV + 0upV
2155	local edgePerp = 0rightV + -1upV
2156	local cut = Instance.new("Part")
2157	cut.Size = Vector3.new(22.96, 1, 22.96)
2158	cut.CFrame = CFrame.fromMatrix(pos + -1 * 11.48 * edgePerp, edgeDir, normalV)
2159	cut.BrickColor = BrickColor.new("Bright orange")
2160	cut.Material = Enum.Material.Glacier
2161	cut.MaterialVariant = "2022 Stud"
2162	cut.Anchored = true; cut.Parent = workspace
2163	table.insert(angBoxes, cut)
2164	end
2165	do
2166	local edgeDir = 1rightV + 0upV
2167	local edgePerp = 0rightV + 1upV
2168	local cut = Instance.new("Part")
2169	cut.Size = Vector3.new(22.96, 1, 22.96)
2170	cut.CFrame = CFrame.fromMatrix(pos + 1 * 11.48 * edgePerp, edgeDir, normalV)
2171	cut.BrickColor = BrickColor.new("Bright orange")
2172	cut.Material = Enum.Material.Glacier
2173	cut.MaterialVariant = "2022 Stud"
2174	cut.Anchored = true; cut.Parent = workspace
2175	table.insert(angBoxes, cut)
2176	end
2177	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2178	if #cuts > 0 then
2179	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2180	for _, c in ipairs(cuts) do c:Destroy() end
2181	if ok and result then
2182	cyl:Destroy()
2183	result.Name = "Coil_2_1_B"; result.Anchored = true; result.Parent = model
2184	else
2185	cyl.Name = "Coil_2_1_B"; cyl.Parent = model
2186	end
2187	else
2188	cyl.Name = "Coil_2_1_B"; cyl.Parent = model
2189	end
2190	end
2191	do
2192	local rightV = Vector3.new(1,0,0).Unit
2193	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2194	local normalV = upV:Cross(rightV)
2195	local pos = Vector3.new(0, -0.82, 0.04)
2196	local cyl = Instance.new("Part")
2197	cyl.Shape = Enum.PartType.Cylinder
2198	cyl.Size = Vector3.new(0.8, 13.04, 13.04)
2199	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2200	cyl.BrickColor = BrickColor.new("Bright orange")
2201	cyl.Material = Enum.Material.Glacier
2202	cyl.MaterialVariant = "2022 Stud"
2203	cyl.Anchored = true; cyl.Parent = workspace
2204	local cuts = {}
2205	local hole = Instance.new("Part")
2206	hole.Shape = Enum.PartType.Cylinder
2207	hole.Size = Vector3.new(1, 11.44, 11.44)
2208	hole.CFrame = cyl.CFrame
2209	hole.BrickColor = BrickColor.new("Bright orange")
2210	hole.Material = Enum.Material.Glacier
2211	hole.MaterialVariant = "2022 Stud"
2212	hole.Anchored = true; hole.Parent = workspace
2213	table.insert(cuts, hole)
2214	local angBoxes = {}
2215	do
2216	local edgeDir = 1rightV + 0upV
2217	local edgePerp = 0rightV + 1upV
2218	local cut = Instance.new("Part")
2219	cut.Size = Vector3.new(26.08, 1, 26.08)
2220	cut.CFrame = CFrame.fromMatrix(pos + -1 * 13.04 * edgePerp, edgeDir, normalV)
2221	cut.BrickColor = BrickColor.new("Bright orange")
2222	cut.Material = Enum.Material.Glacier
2223	cut.MaterialVariant = "2022 Stud"
2224	cut.Anchored = true; cut.Parent = workspace
2225	table.insert(angBoxes, cut)
2226	end
2227	do
2228	local edgeDir = -1rightV + 0upV
2229	local edgePerp = 0rightV + -1upV
2230	local cut = Instance.new("Part")
2231	cut.Size = Vector3.new(26.08, 1, 26.08)
2232	cut.CFrame = CFrame.fromMatrix(pos + 1 * 13.04 * edgePerp, edgeDir, normalV)
2233	cut.BrickColor = BrickColor.new("Bright orange")
2234	cut.Material = Enum.Material.Glacier
2235	cut.MaterialVariant = "2022 Stud"
2236	cut.Anchored = true; cut.Parent = workspace
2237	table.insert(angBoxes, cut)
2238	end
2239	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2240	if #cuts > 0 then
2241	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2242	for _, c in ipairs(cuts) do c:Destroy() end
2243	if ok and result then
2244	cyl:Destroy()
2245	result.Name = "Coil_2_2_A"; result.Anchored = true; result.Parent = model
2246	else
2247	cyl.Name = "Coil_2_2_A"; cyl.Parent = model
2248	end
2249	else
2250	cyl.Name = "Coil_2_2_A"; cyl.Parent = model
2251	end
2252	end
2253	do
2254	local rightV = Vector3.new(1,0,0).Unit
2255	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2256	local normalV = upV:Cross(rightV)
2257	local pos = Vector3.new(0, -1.06, -0.04)
2258	local cyl = Instance.new("Part")
2259	cyl.Shape = Enum.PartType.Cylinder
2260	cyl.Size = Vector3.new(0.8, 13.04, 13.04)
2261	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2262	cyl.BrickColor = BrickColor.new("Bright orange")
2263	cyl.Material = Enum.Material.Glacier
2264	cyl.MaterialVariant = "2022 Stud"
2265	cyl.Anchored = true; cyl.Parent = workspace
2266	local cuts = {}
2267	local hole = Instance.new("Part")
2268	hole.Shape = Enum.PartType.Cylinder
2269	hole.Size = Vector3.new(1, 11.44, 11.44)
2270	hole.CFrame = cyl.CFrame
2271	hole.BrickColor = BrickColor.new("Bright orange")
2272	hole.Material = Enum.Material.Glacier
2273	hole.MaterialVariant = "2022 Stud"
2274	hole.Anchored = true; hole.Parent = workspace
2275	table.insert(cuts, hole)
2276	local angBoxes = {}
2277	do
2278	local edgeDir = -1rightV + 0upV
2279	local edgePerp = 0rightV + -1upV
2280	local cut = Instance.new("Part")
2281	cut.Size = Vector3.new(26.08, 1, 26.08)
2282	cut.CFrame = CFrame.fromMatrix(pos + -1 * 13.04 * edgePerp, edgeDir, normalV)
2283	cut.BrickColor = BrickColor.new("Bright orange")
2284	cut.Material = Enum.Material.Glacier
2285	cut.MaterialVariant = "2022 Stud"
2286	cut.Anchored = true; cut.Parent = workspace
2287	table.insert(angBoxes, cut)
2288	end
2289	do
2290	local edgeDir = 1rightV + 0upV
2291	local edgePerp = 0rightV + 1upV
2292	local cut = Instance.new("Part")
2293	cut.Size = Vector3.new(26.08, 1, 26.08)
2294	cut.CFrame = CFrame.fromMatrix(pos + 1 * 13.04 * edgePerp, edgeDir, normalV)
2295	cut.BrickColor = BrickColor.new("Bright orange")
2296	cut.Material = Enum.Material.Glacier
2297	cut.MaterialVariant = "2022 Stud"
2298	cut.Anchored = true; cut.Parent = workspace
2299	table.insert(angBoxes, cut)
2300	end
2301	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2302	if #cuts > 0 then
2303	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2304	for _, c in ipairs(cuts) do c:Destroy() end
2305	if ok and result then
2306	cyl:Destroy()
2307	result.Name = "Coil_2_2_B"; result.Anchored = true; result.Parent = model
2308	else
2309	cyl.Name = "Coil_2_2_B"; cyl.Parent = model
2310	end
2311	else
2312	cyl.Name = "Coil_2_2_B"; cyl.Parent = model
2313	end
2314	end
2315	do
2316	local rightV = Vector3.new(1,0,0).Unit
2317	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2318	local normalV = upV:Cross(rightV)
2319	local pos = Vector3.new(0, -1.02, 0.04)
2320	local cyl = Instance.new("Part")
2321	cyl.Shape = Enum.PartType.Cylinder
2322	cyl.Size = Vector3.new(0.8, 15, 15)
2323	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2324	cyl.BrickColor = BrickColor.new("Bright orange")
2325	cyl.Material = Enum.Material.Glacier
2326	cyl.MaterialVariant = "2022 Stud"
2327	cyl.Anchored = true; cyl.Parent = workspace
2328	local cuts = {}
2329	local hole = Instance.new("Part")
2330	hole.Shape = Enum.PartType.Cylinder
2331	hole.Size = Vector3.new(1, 13.4, 13.4)
2332	hole.CFrame = cyl.CFrame
2333	hole.BrickColor = BrickColor.new("Bright orange")
2334	hole.Material = Enum.Material.Glacier
2335	hole.MaterialVariant = "2022 Stud"
2336	hole.Anchored = true; hole.Parent = workspace
2337	table.insert(cuts, hole)
2338	local angBoxes = {}
2339	do
2340	local edgeDir = 1rightV + 0upV
2341	local edgePerp = 0rightV + 1upV
2342	local cut = Instance.new("Part")
2343	cut.Size = Vector3.new(30, 1, 30)
2344	cut.CFrame = CFrame.fromMatrix(pos + -1 * 15 * edgePerp, edgeDir, normalV)
2345	cut.BrickColor = BrickColor.new("Bright orange")
2346	cut.Material = Enum.Material.Glacier
2347	cut.MaterialVariant = "2022 Stud"
2348	cut.Anchored = true; cut.Parent = workspace
2349	table.insert(angBoxes, cut)
2350	end
2351	do
2352	local edgeDir = -1rightV + 0upV
2353	local edgePerp = 0rightV + -1upV
2354	local cut = Instance.new("Part")
2355	cut.Size = Vector3.new(30, 1, 30)
2356	cut.CFrame = CFrame.fromMatrix(pos + 1 * 15 * edgePerp, edgeDir, normalV)
2357	cut.BrickColor = BrickColor.new("Bright orange")
2358	cut.Material = Enum.Material.Glacier
2359	cut.MaterialVariant = "2022 Stud"
2360	cut.Anchored = true; cut.Parent = workspace
2361	table.insert(angBoxes, cut)
2362	end
2363	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2364	if #cuts > 0 then
2365	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2366	for _, c in ipairs(cuts) do c:Destroy() end
2367	if ok and result then
2368	cyl:Destroy()
2369	result.Name = "Coil_2_3_A"; result.Anchored = true; result.Parent = model
2370	else
2371	cyl.Name = "Coil_2_3_A"; cyl.Parent = model
2372	end
2373	else
2374	cyl.Name = "Coil_2_3_A"; cyl.Parent = model
2375	end
2376	end
2377	do
2378	local rightV = Vector3.new(1,0,0).Unit
2379	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2380	local normalV = upV:Cross(rightV)
2381	local pos = Vector3.new(0, -0.86, 0)
2382	local cyl = Instance.new("Part")
2383	cyl.Shape = Enum.PartType.Cylinder
2384	cyl.Size = Vector3.new(0.8, 15, 15)
2385	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2386	cyl.BrickColor = BrickColor.new("Bright orange")
2387	cyl.Material = Enum.Material.Glacier
2388	cyl.MaterialVariant = "2022 Stud"
2389	cyl.Anchored = true; cyl.Parent = workspace
2390	local cuts = {}
2391	local hole = Instance.new("Part")
2392	hole.Shape = Enum.PartType.Cylinder
2393	hole.Size = Vector3.new(1, 13.4, 13.4)
2394	hole.CFrame = cyl.CFrame
2395	hole.BrickColor = BrickColor.new("Bright orange")
2396	hole.Material = Enum.Material.Glacier
2397	hole.MaterialVariant = "2022 Stud"
2398	hole.Anchored = true; hole.Parent = workspace
2399	table.insert(cuts, hole)
2400	local angBoxes = {}
2401	do
2402	local edgeDir = -1rightV + 0upV
2403	local edgePerp = 0rightV + -1upV
2404	local cut = Instance.new("Part")
2405	cut.Size = Vector3.new(30, 1, 30)
2406	cut.CFrame = CFrame.fromMatrix(pos + -1 * 15 * edgePerp, edgeDir, normalV)
2407	cut.BrickColor = BrickColor.new("Bright orange")
2408	cut.Material = Enum.Material.Glacier
2409	cut.MaterialVariant = "2022 Stud"
2410	cut.Anchored = true; cut.Parent = workspace
2411	table.insert(angBoxes, cut)
2412	end
2413	do
2414	local edgeDir = 1rightV + 0upV
2415	local edgePerp = 0rightV + 1upV
2416	local cut = Instance.new("Part")
2417	cut.Size = Vector3.new(30, 1, 30)
2418	cut.CFrame = CFrame.fromMatrix(pos + 1 * 15 * edgePerp, edgeDir, normalV)
2419	cut.BrickColor = BrickColor.new("Bright orange")
2420	cut.Material = Enum.Material.Glacier
2421	cut.MaterialVariant = "2022 Stud"
2422	cut.Anchored = true; cut.Parent = workspace
2423	table.insert(angBoxes, cut)
2424	end
2425	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2426	if #cuts > 0 then
2427	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2428	for _, c in ipairs(cuts) do c:Destroy() end
2429	if ok and result then
2430	cyl:Destroy()
2431	result.Name = "Coil_2_3_B"; result.Anchored = true; result.Parent = model
2432	else
2433	cyl.Name = "Coil_2_3_B"; cyl.Parent = model
2434	end
2435	else
2436	cyl.Name = "Coil_2_3_B"; cyl.Parent = model
2437	end
2438	end
2439	do
2440	local rightV = Vector3.new(1,0,0).Unit
2441	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2442	local normalV = upV:Cross(rightV)
2443	local pos = Vector3.new(0, -0.9, 0.12)
2444	local cyl = Instance.new("Part")
2445	cyl.Shape = Enum.PartType.Cylinder
2446	cyl.Size = Vector3.new(0.8, 16.96, 16.96)
2447	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2448	cyl.BrickColor = BrickColor.new("Bright orange")
2449	cyl.Material = Enum.Material.Glacier
2450	cyl.MaterialVariant = "2022 Stud"
2451	cyl.Anchored = true; cyl.Parent = workspace
2452	local cuts = {}
2453	local hole = Instance.new("Part")
2454	hole.Shape = Enum.PartType.Cylinder
2455	hole.Size = Vector3.new(1, 15.36, 15.36)
2456	hole.CFrame = cyl.CFrame
2457	hole.BrickColor = BrickColor.new("Bright orange")
2458	hole.Material = Enum.Material.Glacier
2459	hole.MaterialVariant = "2022 Stud"
2460	hole.Anchored = true; hole.Parent = workspace
2461	table.insert(cuts, hole)
2462	local angBoxes = {}
2463	do
2464	local edgeDir = 1rightV + 0upV
2465	local edgePerp = 0rightV + 1upV
2466	local cut = Instance.new("Part")
2467	cut.Size = Vector3.new(33.92, 1, 33.92)
2468	cut.CFrame = CFrame.fromMatrix(pos + -1 * 16.96 * edgePerp, edgeDir, normalV)
2469	cut.BrickColor = BrickColor.new("Bright orange")
2470	cut.Material = Enum.Material.Glacier
2471	cut.MaterialVariant = "2022 Stud"
2472	cut.Anchored = true; cut.Parent = workspace
2473	table.insert(angBoxes, cut)
2474	end
2475	do
2476	local edgeDir = -1rightV + 0upV
2477	local edgePerp = 0rightV + -1upV
2478	local cut = Instance.new("Part")
2479	cut.Size = Vector3.new(33.92, 1, 33.92)
2480	cut.CFrame = CFrame.fromMatrix(pos + 1 * 16.96 * edgePerp, edgeDir, normalV)
2481	cut.BrickColor = BrickColor.new("Bright orange")
2482	cut.Material = Enum.Material.Glacier
2483	cut.MaterialVariant = "2022 Stud"
2484	cut.Anchored = true; cut.Parent = workspace
2485	table.insert(angBoxes, cut)
2486	end
2487	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2488	if #cuts > 0 then
2489	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2490	for _, c in ipairs(cuts) do c:Destroy() end
2491	if ok and result then
2492	cyl:Destroy()
2493	result.Name = "Coil_2_4_A"; result.Anchored = true; result.Parent = model
2494	else
2495	cyl.Name = "Coil_2_4_A"; cyl.Parent = model
2496	end
2497	else
2498	cyl.Name = "Coil_2_4_A"; cyl.Parent = model
2499	end
2500	end
2501	do
2502	local rightV = Vector3.new(1,0,0).Unit
2503	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2504	local normalV = upV:Cross(rightV)
2505	local pos = Vector3.new(0, -0.82, 0.08)
2506	local cyl = Instance.new("Part")
2507	cyl.Shape = Enum.PartType.Cylinder
2508	cyl.Size = Vector3.new(0.8, 16.96, 16.96)
2509	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2510	cyl.BrickColor = BrickColor.new("Bright orange")
2511	cyl.Material = Enum.Material.Glacier
2512	cyl.MaterialVariant = "2022 Stud"
2513	cyl.Anchored = true; cyl.Parent = workspace
2514	local cuts = {}
2515	local hole = Instance.new("Part")
2516	hole.Shape = Enum.PartType.Cylinder
2517	hole.Size = Vector3.new(1, 15.36, 15.36)
2518	hole.CFrame = cyl.CFrame
2519	hole.BrickColor = BrickColor.new("Bright orange")
2520	hole.Material = Enum.Material.Glacier
2521	hole.MaterialVariant = "2022 Stud"
2522	hole.Anchored = true; hole.Parent = workspace
2523	table.insert(cuts, hole)
2524	local angBoxes = {}
2525	do
2526	local edgeDir = -1rightV + 0upV
2527	local edgePerp = 0rightV + -1upV
2528	local cut = Instance.new("Part")
2529	cut.Size = Vector3.new(33.92, 1, 33.92)
2530	cut.CFrame = CFrame.fromMatrix(pos + -1 * 16.96 * edgePerp, edgeDir, normalV)
2531	cut.BrickColor = BrickColor.new("Bright orange")
2532	cut.Material = Enum.Material.Glacier
2533	cut.MaterialVariant = "2022 Stud"
2534	cut.Anchored = true; cut.Parent = workspace
2535	table.insert(angBoxes, cut)
2536	end
2537	do
2538	local edgeDir = 1rightV + 0upV
2539	local edgePerp = 0rightV + 1upV
2540	local cut = Instance.new("Part")
2541	cut.Size = Vector3.new(33.92, 1, 33.92)
2542	cut.CFrame = CFrame.fromMatrix(pos + 1 * 16.96 * edgePerp, edgeDir, normalV)
2543	cut.BrickColor = BrickColor.new("Bright orange")
2544	cut.Material = Enum.Material.Glacier
2545	cut.MaterialVariant = "2022 Stud"
2546	cut.Anchored = true; cut.Parent = workspace
2547	table.insert(angBoxes, cut)
2548	end
2549	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2550	if #cuts > 0 then
2551	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2552	for _, c in ipairs(cuts) do c:Destroy() end
2553	if ok and result then
2554	cyl:Destroy()
2555	result.Name = "Coil_2_4_B"; result.Anchored = true; result.Parent = model
2556	else
2557	cyl.Name = "Coil_2_4_B"; cyl.Parent = model
2558	end
2559	else
2560	cyl.Name = "Coil_2_4_B"; cyl.Parent = model
2561	end
2562	end
2563	do
2564	local rightV = Vector3.new(1,0,0).Unit
2565	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2566	local normalV = upV:Cross(rightV)
2567	local pos = Vector3.new(0, -0.94, 0.04)
2568	local cyl = Instance.new("Part")
2569	cyl.Shape = Enum.PartType.Cylinder
2570	cyl.Size = Vector3.new(0.8, 18.52, 18.52)
2571	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2572	cyl.BrickColor = BrickColor.new("Bright orange")
2573	cyl.Material = Enum.Material.Glacier
2574	cyl.MaterialVariant = "2022 Stud"
2575	cyl.Anchored = true; cyl.Parent = workspace
2576	local cuts = {}
2577	local hole = Instance.new("Part")
2578	hole.Shape = Enum.PartType.Cylinder
2579	hole.Size = Vector3.new(1, 16.92, 16.92)
2580	hole.CFrame = cyl.CFrame
2581	hole.BrickColor = BrickColor.new("Bright orange")
2582	hole.Material = Enum.Material.Glacier
2583	hole.MaterialVariant = "2022 Stud"
2584	hole.Anchored = true; hole.Parent = workspace
2585	table.insert(cuts, hole)
2586	local angBoxes = {}
2587	do
2588	local edgeDir = 1rightV + 0upV
2589	local edgePerp = 0rightV + 1upV
2590	local cut = Instance.new("Part")
2591	cut.Size = Vector3.new(37.04, 1, 37.04)
2592	cut.CFrame = CFrame.fromMatrix(pos + -1 * 18.52 * edgePerp, edgeDir, normalV)
2593	cut.BrickColor = BrickColor.new("Bright orange")
2594	cut.Material = Enum.Material.Glacier
2595	cut.MaterialVariant = "2022 Stud"
2596	cut.Anchored = true; cut.Parent = workspace
2597	table.insert(angBoxes, cut)
2598	end
2599	do
2600	local edgeDir = -1rightV + 0upV
2601	local edgePerp = 0rightV + -1upV
2602	local cut = Instance.new("Part")
2603	cut.Size = Vector3.new(37.04, 1, 37.04)
2604	cut.CFrame = CFrame.fromMatrix(pos + 1 * 18.52 * edgePerp, edgeDir, normalV)
2605	cut.BrickColor = BrickColor.new("Bright orange")
2606	cut.Material = Enum.Material.Glacier
2607	cut.MaterialVariant = "2022 Stud"
2608	cut.Anchored = true; cut.Parent = workspace
2609	table.insert(angBoxes, cut)
2610	end
2611	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2612	if #cuts > 0 then
2613	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2614	for _, c in ipairs(cuts) do c:Destroy() end
2615	if ok and result then
2616	cyl:Destroy()
2617	result.Name = "Coil_2_5_A"; result.Anchored = true; result.Parent = model
2618	else
2619	cyl.Name = "Coil_2_5_A"; cyl.Parent = model
2620	end
2621	else
2622	cyl.Name = "Coil_2_5_A"; cyl.Parent = model
2623	end
2624	end
2625	do
2626	local rightV = Vector3.new(1,0,0).Unit
2627	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2628	local normalV = upV:Cross(rightV)
2629	local pos = Vector3.new(0, -0.98, 0)
2630	local cyl = Instance.new("Part")
2631	cyl.Shape = Enum.PartType.Cylinder
2632	cyl.Size = Vector3.new(0.8, 18.52, 18.52)
2633	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2634	cyl.BrickColor = BrickColor.new("Bright orange")
2635	cyl.Material = Enum.Material.Glacier
2636	cyl.MaterialVariant = "2022 Stud"
2637	cyl.Anchored = true; cyl.Parent = workspace
2638	local cuts = {}
2639	local hole = Instance.new("Part")
2640	hole.Shape = Enum.PartType.Cylinder
2641	hole.Size = Vector3.new(1, 16.92, 16.92)
2642	hole.CFrame = cyl.CFrame
2643	hole.BrickColor = BrickColor.new("Bright orange")
2644	hole.Material = Enum.Material.Glacier
2645	hole.MaterialVariant = "2022 Stud"
2646	hole.Anchored = true; hole.Parent = workspace
2647	table.insert(cuts, hole)
2648	local angBoxes = {}
2649	do
2650	local edgeDir = -1rightV + 0upV
2651	local edgePerp = 0rightV + -1upV
2652	local cut = Instance.new("Part")
2653	cut.Size = Vector3.new(37.04, 1, 37.04)
2654	cut.CFrame = CFrame.fromMatrix(pos + -1 * 18.52 * edgePerp, edgeDir, normalV)
2655	cut.BrickColor = BrickColor.new("Bright orange")
2656	cut.Material = Enum.Material.Glacier
2657	cut.MaterialVariant = "2022 Stud"
2658	cut.Anchored = true; cut.Parent = workspace
2659	table.insert(angBoxes, cut)
2660	end
2661	do
2662	local edgeDir = 1rightV + 0upV
2663	local edgePerp = 0rightV + 1upV
2664	local cut = Instance.new("Part")
2665	cut.Size = Vector3.new(37.04, 1, 37.04)
2666	cut.CFrame = CFrame.fromMatrix(pos + 1 * 18.52 * edgePerp, edgeDir, normalV)
2667	cut.BrickColor = BrickColor.new("Bright orange")
2668	cut.Material = Enum.Material.Glacier
2669	cut.MaterialVariant = "2022 Stud"
2670	cut.Anchored = true; cut.Parent = workspace
2671	table.insert(angBoxes, cut)
2672	end
2673	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2674	if #cuts > 0 then
2675	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2676	for _, c in ipairs(cuts) do c:Destroy() end
2677	if ok and result then
2678	cyl:Destroy()
2679	result.Name = "Coil_2_5_B"; result.Anchored = true; result.Parent = model
2680	else
2681	cyl.Name = "Coil_2_5_B"; cyl.Parent = model
2682	end
2683	else
2684	cyl.Name = "Coil_2_5_B"; cyl.Parent = model
2685	end
2686	end
2687	do
2688	local rightV = Vector3.new(1,0,0).Unit
2689	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2690	local normalV = upV:Cross(rightV)
2691	local pos = Vector3.new(0, 0.24, 0.12)
2692	local cyl = Instance.new("Part")
2693	cyl.Shape = Enum.PartType.Cylinder
2694	cyl.Size = Vector3.new(0.8, 9.76, 9.76)
2695	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2696	cyl.BrickColor = BrickColor.new("Bright orange")
2697	cyl.Material = Enum.Material.Glacier
2698	cyl.MaterialVariant = "2022 Stud"
2699	cyl.Anchored = true; cyl.Parent = workspace
2700	local cuts = {}
2701	local hole = Instance.new("Part")
2702	hole.Shape = Enum.PartType.Cylinder
2703	hole.Size = Vector3.new(1, 8.16, 8.16)
2704	hole.CFrame = cyl.CFrame
2705	hole.BrickColor = BrickColor.new("Bright orange")
2706	hole.Material = Enum.Material.Glacier
2707	hole.MaterialVariant = "2022 Stud"
2708	hole.Anchored = true; hole.Parent = workspace
2709	table.insert(cuts, hole)
2710	local angBoxes = {}
2711	do
2712	local edgeDir = 1rightV + 0upV
2713	local edgePerp = 0rightV + 1upV
2714	local cut = Instance.new("Part")
2715	cut.Size = Vector3.new(19.52, 1, 19.52)
2716	cut.CFrame = CFrame.fromMatrix(pos + -1 * 9.76 * edgePerp, edgeDir, normalV)
2717	cut.BrickColor = BrickColor.new("Bright orange")
2718	cut.Material = Enum.Material.Glacier
2719	cut.MaterialVariant = "2022 Stud"
2720	cut.Anchored = true; cut.Parent = workspace
2721	table.insert(angBoxes, cut)
2722	end
2723	do
2724	local edgeDir = -1rightV + 0upV
2725	local edgePerp = 0rightV + -1upV
2726	local cut = Instance.new("Part")
2727	cut.Size = Vector3.new(19.52, 1, 19.52)
2728	cut.CFrame = CFrame.fromMatrix(pos + 1 * 9.76 * edgePerp, edgeDir, normalV)
2729	cut.BrickColor = BrickColor.new("Bright orange")
2730	cut.Material = Enum.Material.Glacier
2731	cut.MaterialVariant = "2022 Stud"
2732	cut.Anchored = true; cut.Parent = workspace
2733	table.insert(angBoxes, cut)
2734	end
2735	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2736	if #cuts > 0 then
2737	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2738	for _, c in ipairs(cuts) do c:Destroy() end
2739	if ok and result then
2740	cyl:Destroy()
2741	result.Name = "Coil_3_0_A"; result.Anchored = true; result.Parent = model
2742	else
2743	cyl.Name = "Coil_3_0_A"; cyl.Parent = model
2744	end
2745	else
2746	cyl.Name = "Coil_3_0_A"; cyl.Parent = model
2747	end
2748	end
2749	do
2750	local rightV = Vector3.new(1,0,0).Unit
2751	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2752	local normalV = upV:Cross(rightV)
2753	local pos = Vector3.new(0, -0.16, 0.08)
2754	local cyl = Instance.new("Part")
2755	cyl.Shape = Enum.PartType.Cylinder
2756	cyl.Size = Vector3.new(0.8, 9.76, 9.76)
2757	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2758	cyl.BrickColor = BrickColor.new("Bright orange")
2759	cyl.Material = Enum.Material.Glacier
2760	cyl.MaterialVariant = "2022 Stud"
2761	cyl.Anchored = true; cyl.Parent = workspace
2762	local cuts = {}
2763	local hole = Instance.new("Part")
2764	hole.Shape = Enum.PartType.Cylinder
2765	hole.Size = Vector3.new(1, 8.16, 8.16)
2766	hole.CFrame = cyl.CFrame
2767	hole.BrickColor = BrickColor.new("Bright orange")
2768	hole.Material = Enum.Material.Glacier
2769	hole.MaterialVariant = "2022 Stud"
2770	hole.Anchored = true; hole.Parent = workspace
2771	table.insert(cuts, hole)
2772	local angBoxes = {}
2773	do
2774	local edgeDir = -1rightV + 0upV
2775	local edgePerp = 0rightV + -1upV
2776	local cut = Instance.new("Part")
2777	cut.Size = Vector3.new(19.52, 1, 19.52)
2778	cut.CFrame = CFrame.fromMatrix(pos + -1 * 9.76 * edgePerp, edgeDir, normalV)
2779	cut.BrickColor = BrickColor.new("Bright orange")
2780	cut.Material = Enum.Material.Glacier
2781	cut.MaterialVariant = "2022 Stud"
2782	cut.Anchored = true; cut.Parent = workspace
2783	table.insert(angBoxes, cut)
2784	end
2785	do
2786	local edgeDir = 1rightV + 0upV
2787	local edgePerp = 0rightV + 1upV
2788	local cut = Instance.new("Part")
2789	cut.Size = Vector3.new(19.52, 1, 19.52)
2790	cut.CFrame = CFrame.fromMatrix(pos + 1 * 9.76 * edgePerp, edgeDir, normalV)
2791	cut.BrickColor = BrickColor.new("Bright orange")
2792	cut.Material = Enum.Material.Glacier
2793	cut.MaterialVariant = "2022 Stud"
2794	cut.Anchored = true; cut.Parent = workspace
2795	table.insert(angBoxes, cut)
2796	end
2797	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2798	if #cuts > 0 then
2799	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2800	for _, c in ipairs(cuts) do c:Destroy() end
2801	if ok and result then
2802	cyl:Destroy()
2803	result.Name = "Coil_3_0_B"; result.Anchored = true; result.Parent = model
2804	else
2805	cyl.Name = "Coil_3_0_B"; cyl.Parent = model
2806	end
2807	else
2808	cyl.Name = "Coil_3_0_B"; cyl.Parent = model
2809	end
2810	end
2811	do
2812	local rightV = Vector3.new(1,0,0).Unit
2813	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2814	local normalV = upV:Cross(rightV)
2815	local pos = Vector3.new(0, 0.2, 0.04)
2816	local cyl = Instance.new("Part")
2817	cyl.Shape = Enum.PartType.Cylinder
2818	cyl.Size = Vector3.new(0.8, 11.32, 11.32)
2819	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2820	cyl.BrickColor = BrickColor.new("Bright orange")
2821	cyl.Material = Enum.Material.Glacier
2822	cyl.MaterialVariant = "2022 Stud"
2823	cyl.Anchored = true; cyl.Parent = workspace
2824	local cuts = {}
2825	local hole = Instance.new("Part")
2826	hole.Shape = Enum.PartType.Cylinder
2827	hole.Size = Vector3.new(1, 9.72, 9.72)
2828	hole.CFrame = cyl.CFrame
2829	hole.BrickColor = BrickColor.new("Bright orange")
2830	hole.Material = Enum.Material.Glacier
2831	hole.MaterialVariant = "2022 Stud"
2832	hole.Anchored = true; hole.Parent = workspace
2833	table.insert(cuts, hole)
2834	local angBoxes = {}
2835	do
2836	local edgeDir = 1rightV + 0upV
2837	local edgePerp = 0rightV + 1upV
2838	local cut = Instance.new("Part")
2839	cut.Size = Vector3.new(22.64, 1, 22.64)
2840	cut.CFrame = CFrame.fromMatrix(pos + -1 * 11.32 * edgePerp, edgeDir, normalV)
2841	cut.BrickColor = BrickColor.new("Bright orange")
2842	cut.Material = Enum.Material.Glacier
2843	cut.MaterialVariant = "2022 Stud"
2844	cut.Anchored = true; cut.Parent = workspace
2845	table.insert(angBoxes, cut)
2846	end
2847	do
2848	local edgeDir = -1rightV + 0upV
2849	local edgePerp = 0rightV + -1upV
2850	local cut = Instance.new("Part")
2851	cut.Size = Vector3.new(22.64, 1, 22.64)
2852	cut.CFrame = CFrame.fromMatrix(pos + 1 * 11.32 * edgePerp, edgeDir, normalV)
2853	cut.BrickColor = BrickColor.new("Bright orange")
2854	cut.Material = Enum.Material.Glacier
2855	cut.MaterialVariant = "2022 Stud"
2856	cut.Anchored = true; cut.Parent = workspace
2857	table.insert(angBoxes, cut)
2858	end
2859	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2860	if #cuts > 0 then
2861	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2862	for _, c in ipairs(cuts) do c:Destroy() end
2863	if ok and result then
2864	cyl:Destroy()
2865	result.Name = "Coil_3_1_A"; result.Anchored = true; result.Parent = model
2866	else
2867	cyl.Name = "Coil_3_1_A"; cyl.Parent = model
2868	end
2869	else
2870	cyl.Name = "Coil_3_1_A"; cyl.Parent = model
2871	end
2872	end
2873	do
2874	local rightV = Vector3.new(1,0,0).Unit
2875	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2876	local normalV = upV:Cross(rightV)
2877	local pos = Vector3.new(0, 0.16, 0)
2878	local cyl = Instance.new("Part")
2879	cyl.Shape = Enum.PartType.Cylinder
2880	cyl.Size = Vector3.new(0.8, 11.32, 11.32)
2881	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2882	cyl.BrickColor = BrickColor.new("Bright orange")
2883	cyl.Material = Enum.Material.Glacier
2884	cyl.MaterialVariant = "2022 Stud"
2885	cyl.Anchored = true; cyl.Parent = workspace
2886	local cuts = {}
2887	local hole = Instance.new("Part")
2888	hole.Shape = Enum.PartType.Cylinder
2889	hole.Size = Vector3.new(1, 9.72, 9.72)
2890	hole.CFrame = cyl.CFrame
2891	hole.BrickColor = BrickColor.new("Bright orange")
2892	hole.Material = Enum.Material.Glacier
2893	hole.MaterialVariant = "2022 Stud"
2894	hole.Anchored = true; hole.Parent = workspace
2895	table.insert(cuts, hole)
2896	local angBoxes = {}
2897	do
2898	local edgeDir = -1rightV + 0upV
2899	local edgePerp = 0rightV + -1upV
2900	local cut = Instance.new("Part")
2901	cut.Size = Vector3.new(22.64, 1, 22.64)
2902	cut.CFrame = CFrame.fromMatrix(pos + -1 * 11.32 * edgePerp, edgeDir, normalV)
2903	cut.BrickColor = BrickColor.new("Bright orange")
2904	cut.Material = Enum.Material.Glacier
2905	cut.MaterialVariant = "2022 Stud"
2906	cut.Anchored = true; cut.Parent = workspace
2907	table.insert(angBoxes, cut)
2908	end
2909	do
2910	local edgeDir = 1rightV + 0upV
2911	local edgePerp = 0rightV + 1upV
2912	local cut = Instance.new("Part")
2913	cut.Size = Vector3.new(22.64, 1, 22.64)
2914	cut.CFrame = CFrame.fromMatrix(pos + 1 * 11.32 * edgePerp, edgeDir, normalV)
2915	cut.BrickColor = BrickColor.new("Bright orange")
2916	cut.Material = Enum.Material.Glacier
2917	cut.MaterialVariant = "2022 Stud"
2918	cut.Anchored = true; cut.Parent = workspace
2919	table.insert(angBoxes, cut)
2920	end
2921	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2922	if #cuts > 0 then
2923	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2924	for _, c in ipairs(cuts) do c:Destroy() end
2925	if ok and result then
2926	cyl:Destroy()
2927	result.Name = "Coil_3_1_B"; result.Anchored = true; result.Parent = model
2928	else
2929	cyl.Name = "Coil_3_1_B"; cyl.Parent = model
2930	end
2931	else
2932	cyl.Name = "Coil_3_1_B"; cyl.Parent = model
2933	end
2934	end
2935	do
2936	local rightV = Vector3.new(1,0,0).Unit
2937	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
2938	local normalV = upV:Cross(rightV)
2939	local pos = Vector3.new(0, 0.08, 0.12)
2940	local cyl = Instance.new("Part")
2941	cyl.Shape = Enum.PartType.Cylinder
2942	cyl.Size = Vector3.new(0.8, 13.28, 13.28)
2943	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
2944	cyl.BrickColor = BrickColor.new("Bright orange")
2945	cyl.Material = Enum.Material.Glacier
2946	cyl.MaterialVariant = "2022 Stud"
2947	cyl.Anchored = true; cyl.Parent = workspace
2948	local cuts = {}
2949	local hole = Instance.new("Part")
2950	hole.Shape = Enum.PartType.Cylinder
2951	hole.Size = Vector3.new(1, 11.68, 11.68)
2952	hole.CFrame = cyl.CFrame
2953	hole.BrickColor = BrickColor.new("Bright orange")
2954	hole.Material = Enum.Material.Glacier
2955	hole.MaterialVariant = "2022 Stud"
2956	hole.Anchored = true; hole.Parent = workspace
2957	table.insert(cuts, hole)
2958	local angBoxes = {}
2959	do
2960	local edgeDir = 1rightV + 0upV
2961	local edgePerp = 0rightV + 1upV
2962	local cut = Instance.new("Part")
2963	cut.Size = Vector3.new(26.56, 1, 26.56)
2964	cut.CFrame = CFrame.fromMatrix(pos + -1 * 13.28 * edgePerp, edgeDir, normalV)
2965	cut.BrickColor = BrickColor.new("Bright orange")
2966	cut.Material = Enum.Material.Glacier
2967	cut.MaterialVariant = "2022 Stud"
2968	cut.Anchored = true; cut.Parent = workspace
2969	table.insert(angBoxes, cut)
2970	end
2971	do
2972	local edgeDir = -1rightV + 0upV
2973	local edgePerp = 0rightV + -1upV
2974	local cut = Instance.new("Part")
2975	cut.Size = Vector3.new(26.56, 1, 26.56)
2976	cut.CFrame = CFrame.fromMatrix(pos + 1 * 13.28 * edgePerp, edgeDir, normalV)
2977	cut.BrickColor = BrickColor.new("Bright orange")
2978	cut.Material = Enum.Material.Glacier
2979	cut.MaterialVariant = "2022 Stud"
2980	cut.Anchored = true; cut.Parent = workspace
2981	table.insert(angBoxes, cut)
2982	end
2983	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
2984	if #cuts > 0 then
2985	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
2986	for _, c in ipairs(cuts) do c:Destroy() end
2987	if ok and result then
2988	cyl:Destroy()
2989	result.Name = "Coil_3_2_A"; result.Anchored = true; result.Parent = model
2990	else
2991	cyl.Name = "Coil_3_2_A"; cyl.Parent = model
2992	end
2993	else
2994	cyl.Name = "Coil_3_2_A"; cyl.Parent = model
2995	end
2996	end
2997	do
2998	local rightV = Vector3.new(1,0,0).Unit
2999	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3000	local normalV = upV:Cross(rightV)
3001	local pos = Vector3.new(0, 0.04, 0.08)
3002	local cyl = Instance.new("Part")
3003	cyl.Shape = Enum.PartType.Cylinder
3004	cyl.Size = Vector3.new(0.8, 13.28, 13.28)
3005	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3006	cyl.BrickColor = BrickColor.new("Bright orange")
3007	cyl.Material = Enum.Material.Glacier
3008	cyl.MaterialVariant = "2022 Stud"
3009	cyl.Anchored = true; cyl.Parent = workspace
3010	local cuts = {}
3011	local hole = Instance.new("Part")
3012	hole.Shape = Enum.PartType.Cylinder
3013	hole.Size = Vector3.new(1, 11.68, 11.68)
3014	hole.CFrame = cyl.CFrame
3015	hole.BrickColor = BrickColor.new("Bright orange")
3016	hole.Material = Enum.Material.Glacier
3017	hole.MaterialVariant = "2022 Stud"
3018	hole.Anchored = true; hole.Parent = workspace
3019	table.insert(cuts, hole)
3020	local angBoxes = {}
3021	do
3022	local edgeDir = -1rightV + 0upV
3023	local edgePerp = 0rightV + -1upV
3024	local cut = Instance.new("Part")
3025	cut.Size = Vector3.new(26.56, 1, 26.56)
3026	cut.CFrame = CFrame.fromMatrix(pos + -1 * 13.28 * edgePerp, edgeDir, normalV)
3027	cut.BrickColor = BrickColor.new("Bright orange")
3028	cut.Material = Enum.Material.Glacier
3029	cut.MaterialVariant = "2022 Stud"
3030	cut.Anchored = true; cut.Parent = workspace
3031	table.insert(angBoxes, cut)
3032	end
3033	do
3034	local edgeDir = 1rightV + 0upV
3035	local edgePerp = 0rightV + 1upV
3036	local cut = Instance.new("Part")
3037	cut.Size = Vector3.new(26.56, 1, 26.56)
3038	cut.CFrame = CFrame.fromMatrix(pos + 1 * 13.28 * edgePerp, edgeDir, normalV)
3039	cut.BrickColor = BrickColor.new("Bright orange")
3040	cut.Material = Enum.Material.Glacier
3041	cut.MaterialVariant = "2022 Stud"
3042	cut.Anchored = true; cut.Parent = workspace
3043	table.insert(angBoxes, cut)
3044	end
3045	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3046	if #cuts > 0 then
3047	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3048	for _, c in ipairs(cuts) do c:Destroy() end
3049	if ok and result then
3050	cyl:Destroy()
3051	result.Name = "Coil_3_2_B"; result.Anchored = true; result.Parent = model
3052	else
3053	cyl.Name = "Coil_3_2_B"; cyl.Parent = model
3054	end
3055	else
3056	cyl.Name = "Coil_3_2_B"; cyl.Parent = model
3057	end
3058	end
3059	do
3060	local rightV = Vector3.new(1,0,0).Unit
3061	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3062	local normalV = upV:Cross(rightV)
3063	local pos = Vector3.new(0, 0.04, 0.04)
3064	local cyl = Instance.new("Part")
3065	cyl.Shape = Enum.PartType.Cylinder
3066	cyl.Size = Vector3.new(0.8, 14.84, 14.84)
3067	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3068	cyl.BrickColor = BrickColor.new("Bright orange")
3069	cyl.Material = Enum.Material.Glacier
3070	cyl.MaterialVariant = "2022 Stud"
3071	cyl.Anchored = true; cyl.Parent = workspace
3072	local cuts = {}
3073	local hole = Instance.new("Part")
3074	hole.Shape = Enum.PartType.Cylinder
3075	hole.Size = Vector3.new(1, 13.24, 13.24)
3076	hole.CFrame = cyl.CFrame
3077	hole.BrickColor = BrickColor.new("Bright orange")
3078	hole.Material = Enum.Material.Glacier
3079	hole.MaterialVariant = "2022 Stud"
3080	hole.Anchored = true; hole.Parent = workspace
3081	table.insert(cuts, hole)
3082	local angBoxes = {}
3083	do
3084	local edgeDir = 1rightV + 0upV
3085	local edgePerp = 0rightV + 1upV
3086	local cut = Instance.new("Part")
3087	cut.Size = Vector3.new(29.68, 1, 29.68)
3088	cut.CFrame = CFrame.fromMatrix(pos + -1 * 14.84 * edgePerp, edgeDir, normalV)
3089	cut.BrickColor = BrickColor.new("Bright orange")
3090	cut.Material = Enum.Material.Glacier
3091	cut.MaterialVariant = "2022 Stud"
3092	cut.Anchored = true; cut.Parent = workspace
3093	table.insert(angBoxes, cut)
3094	end
3095	do
3096	local edgeDir = -1rightV + 0upV
3097	local edgePerp = 0rightV + -1upV
3098	local cut = Instance.new("Part")
3099	cut.Size = Vector3.new(29.68, 1, 29.68)
3100	cut.CFrame = CFrame.fromMatrix(pos + 1 * 14.84 * edgePerp, edgeDir, normalV)
3101	cut.BrickColor = BrickColor.new("Bright orange")
3102	cut.Material = Enum.Material.Glacier
3103	cut.MaterialVariant = "2022 Stud"
3104	cut.Anchored = true; cut.Parent = workspace
3105	table.insert(angBoxes, cut)
3106	end
3107	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3108	if #cuts > 0 then
3109	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3110	for _, c in ipairs(cuts) do c:Destroy() end
3111	if ok and result then
3112	cyl:Destroy()
3113	result.Name = "Coil_3_3_A"; result.Anchored = true; result.Parent = model
3114	else
3115	cyl.Name = "Coil_3_3_A"; cyl.Parent = model
3116	end
3117	else
3118	cyl.Name = "Coil_3_3_A"; cyl.Parent = model
3119	end
3120	end
3121	do
3122	local rightV = Vector3.new(1,0,0).Unit
3123	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3124	local normalV = upV:Cross(rightV)
3125	local pos = Vector3.new(0, -0.12, -0.04)
3126	local cyl = Instance.new("Part")
3127	cyl.Shape = Enum.PartType.Cylinder
3128	cyl.Size = Vector3.new(0.8, 14.84, 14.84)
3129	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3130	cyl.BrickColor = BrickColor.new("Bright orange")
3131	cyl.Material = Enum.Material.Glacier
3132	cyl.MaterialVariant = "2022 Stud"
3133	cyl.Anchored = true; cyl.Parent = workspace
3134	local cuts = {}
3135	local hole = Instance.new("Part")
3136	hole.Shape = Enum.PartType.Cylinder
3137	hole.Size = Vector3.new(1, 13.24, 13.24)
3138	hole.CFrame = cyl.CFrame
3139	hole.BrickColor = BrickColor.new("Bright orange")
3140	hole.Material = Enum.Material.Glacier
3141	hole.MaterialVariant = "2022 Stud"
3142	hole.Anchored = true; hole.Parent = workspace
3143	table.insert(cuts, hole)
3144	local angBoxes = {}
3145	do
3146	local edgeDir = -1rightV + 0upV
3147	local edgePerp = 0rightV + -1upV
3148	local cut = Instance.new("Part")
3149	cut.Size = Vector3.new(29.68, 1, 29.68)
3150	cut.CFrame = CFrame.fromMatrix(pos + -1 * 14.84 * edgePerp, edgeDir, normalV)
3151	cut.BrickColor = BrickColor.new("Bright orange")
3152	cut.Material = Enum.Material.Glacier
3153	cut.MaterialVariant = "2022 Stud"
3154	cut.Anchored = true; cut.Parent = workspace
3155	table.insert(angBoxes, cut)
3156	end
3157	do
3158	local edgeDir = 1rightV + 0upV
3159	local edgePerp = 0rightV + 1upV
3160	local cut = Instance.new("Part")
3161	cut.Size = Vector3.new(29.68, 1, 29.68)
3162	cut.CFrame = CFrame.fromMatrix(pos + 1 * 14.84 * edgePerp, edgeDir, normalV)
3163	cut.BrickColor = BrickColor.new("Bright orange")
3164	cut.Material = Enum.Material.Glacier
3165	cut.MaterialVariant = "2022 Stud"
3166	cut.Anchored = true; cut.Parent = workspace
3167	table.insert(angBoxes, cut)
3168	end
3169	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3170	if #cuts > 0 then
3171	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3172	for _, c in ipairs(cuts) do c:Destroy() end
3173	if ok and result then
3174	cyl:Destroy()
3175	result.Name = "Coil_3_3_B"; result.Anchored = true; result.Parent = model
3176	else
3177	cyl.Name = "Coil_3_3_B"; cyl.Parent = model
3178	end
3179	else
3180	cyl.Name = "Coil_3_3_B"; cyl.Parent = model
3181	end
3182	end
3183	do
3184	local rightV = Vector3.new(1,0,0).Unit
3185	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3186	local normalV = upV:Cross(rightV)
3187	local pos = Vector3.new(0, 0.12, 0.04)
3188	local cyl = Instance.new("Part")
3189	cyl.Shape = Enum.PartType.Cylinder
3190	cyl.Size = Vector3.new(0.8, 16.8, 16.8)
3191	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3192	cyl.BrickColor = BrickColor.new("Bright orange")
3193	cyl.Material = Enum.Material.Glacier
3194	cyl.MaterialVariant = "2022 Stud"
3195	cyl.Anchored = true; cyl.Parent = workspace
3196	local cuts = {}
3197	local hole = Instance.new("Part")
3198	hole.Shape = Enum.PartType.Cylinder
3199	hole.Size = Vector3.new(1, 15.2, 15.2)
3200	hole.CFrame = cyl.CFrame
3201	hole.BrickColor = BrickColor.new("Bright orange")
3202	hole.Material = Enum.Material.Glacier
3203	hole.MaterialVariant = "2022 Stud"
3204	hole.Anchored = true; hole.Parent = workspace
3205	table.insert(cuts, hole)
3206	local angBoxes = {}
3207	do
3208	local edgeDir = 1rightV + 0upV
3209	local edgePerp = 0rightV + 1upV
3210	local cut = Instance.new("Part")
3211	cut.Size = Vector3.new(33.6, 1, 33.6)
3212	cut.CFrame = CFrame.fromMatrix(pos + -1 * 16.8 * edgePerp, edgeDir, normalV)
3213	cut.BrickColor = BrickColor.new("Bright orange")
3214	cut.Material = Enum.Material.Glacier
3215	cut.MaterialVariant = "2022 Stud"
3216	cut.Anchored = true; cut.Parent = workspace
3217	table.insert(angBoxes, cut)
3218	end
3219	do
3220	local edgeDir = -1rightV + 0upV
3221	local edgePerp = 0rightV + -1upV
3222	local cut = Instance.new("Part")
3223	cut.Size = Vector3.new(33.6, 1, 33.6)
3224	cut.CFrame = CFrame.fromMatrix(pos + 1 * 16.8 * edgePerp, edgeDir, normalV)
3225	cut.BrickColor = BrickColor.new("Bright orange")
3226	cut.Material = Enum.Material.Glacier
3227	cut.MaterialVariant = "2022 Stud"
3228	cut.Anchored = true; cut.Parent = workspace
3229	table.insert(angBoxes, cut)
3230	end
3231	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3232	if #cuts > 0 then
3233	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3234	for _, c in ipairs(cuts) do c:Destroy() end
3235	if ok and result then
3236	cyl:Destroy()
3237	result.Name = "Coil_3_4_A"; result.Anchored = true; result.Parent = model
3238	else
3239	cyl.Name = "Coil_3_4_A"; cyl.Parent = model
3240	end
3241	else
3242	cyl.Name = "Coil_3_4_A"; cyl.Parent = model
3243	end
3244	end
3245	do
3246	local rightV = Vector3.new(1,0,0).Unit
3247	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3248	local normalV = upV:Cross(rightV)
3249	local pos = Vector3.new(0, 0, 0)
3250	local cyl = Instance.new("Part")
3251	cyl.Shape = Enum.PartType.Cylinder
3252	cyl.Size = Vector3.new(0.8, 16.8, 16.8)
3253	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3254	cyl.BrickColor = BrickColor.new("Bright orange")
3255	cyl.Material = Enum.Material.Glacier
3256	cyl.MaterialVariant = "2022 Stud"
3257	cyl.Anchored = true; cyl.Parent = workspace
3258	local cuts = {}
3259	local hole = Instance.new("Part")
3260	hole.Shape = Enum.PartType.Cylinder
3261	hole.Size = Vector3.new(1, 15.2, 15.2)
3262	hole.CFrame = cyl.CFrame
3263	hole.BrickColor = BrickColor.new("Bright orange")
3264	hole.Material = Enum.Material.Glacier
3265	hole.MaterialVariant = "2022 Stud"
3266	hole.Anchored = true; hole.Parent = workspace
3267	table.insert(cuts, hole)
3268	local angBoxes = {}
3269	do
3270	local edgeDir = -1rightV + 0upV
3271	local edgePerp = 0rightV + -1upV
3272	local cut = Instance.new("Part")
3273	cut.Size = Vector3.new(33.6, 1, 33.6)
3274	cut.CFrame = CFrame.fromMatrix(pos + -1 * 16.8 * edgePerp, edgeDir, normalV)
3275	cut.BrickColor = BrickColor.new("Bright orange")
3276	cut.Material = Enum.Material.Glacier
3277	cut.MaterialVariant = "2022 Stud"
3278	cut.Anchored = true; cut.Parent = workspace
3279	table.insert(angBoxes, cut)
3280	end
3281	do
3282	local edgeDir = 1rightV + 0upV
3283	local edgePerp = 0rightV + 1upV
3284	local cut = Instance.new("Part")
3285	cut.Size = Vector3.new(33.6, 1, 33.6)
3286	cut.CFrame = CFrame.fromMatrix(pos + 1 * 16.8 * edgePerp, edgeDir, normalV)
3287	cut.BrickColor = BrickColor.new("Bright orange")
3288	cut.Material = Enum.Material.Glacier
3289	cut.MaterialVariant = "2022 Stud"
3290	cut.Anchored = true; cut.Parent = workspace
3291	table.insert(angBoxes, cut)
3292	end
3293	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3294	if #cuts > 0 then
3295	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3296	for _, c in ipairs(cuts) do c:Destroy() end
3297	if ok and result then
3298	cyl:Destroy()
3299	result.Name = "Coil_3_4_B"; result.Anchored = true; result.Parent = model
3300	else
3301	cyl.Name = "Coil_3_4_B"; cyl.Parent = model
3302	end
3303	else
3304	cyl.Name = "Coil_3_4_B"; cyl.Parent = model
3305	end
3306	end
3307	do
3308	local rightV = Vector3.new(1,0,0).Unit
3309	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3310	local normalV = upV:Cross(rightV)
3311	local pos = Vector3.new(0, -0.04, 0.04)
3312	local cyl = Instance.new("Part")
3313	cyl.Shape = Enum.PartType.Cylinder
3314	cyl.Size = Vector3.new(0.8, 18.76, 18.76)
3315	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3316	cyl.BrickColor = BrickColor.new("Bright orange")
3317	cyl.Material = Enum.Material.Glacier
3318	cyl.MaterialVariant = "2022 Stud"
3319	cyl.Anchored = true; cyl.Parent = workspace
3320	local cuts = {}
3321	local hole = Instance.new("Part")
3322	hole.Shape = Enum.PartType.Cylinder
3323	hole.Size = Vector3.new(1, 17.16, 17.16)
3324	hole.CFrame = cyl.CFrame
3325	hole.BrickColor = BrickColor.new("Bright orange")
3326	hole.Material = Enum.Material.Glacier
3327	hole.MaterialVariant = "2022 Stud"
3328	hole.Anchored = true; hole.Parent = workspace
3329	table.insert(cuts, hole)
3330	local angBoxes = {}
3331	do
3332	local edgeDir = 1rightV + 0upV
3333	local edgePerp = 0rightV + 1upV
3334	local cut = Instance.new("Part")
3335	cut.Size = Vector3.new(37.52, 1, 37.52)
3336	cut.CFrame = CFrame.fromMatrix(pos + -1 * 18.76 * edgePerp, edgeDir, normalV)
3337	cut.BrickColor = BrickColor.new("Bright orange")
3338	cut.Material = Enum.Material.Glacier
3339	cut.MaterialVariant = "2022 Stud"
3340	cut.Anchored = true; cut.Parent = workspace
3341	table.insert(angBoxes, cut)
3342	end
3343	do
3344	local edgeDir = -1rightV + 0upV
3345	local edgePerp = 0rightV + -1upV
3346	local cut = Instance.new("Part")
3347	cut.Size = Vector3.new(37.52, 1, 37.52)
3348	cut.CFrame = CFrame.fromMatrix(pos + 1 * 18.76 * edgePerp, edgeDir, normalV)
3349	cut.BrickColor = BrickColor.new("Bright orange")
3350	cut.Material = Enum.Material.Glacier
3351	cut.MaterialVariant = "2022 Stud"
3352	cut.Anchored = true; cut.Parent = workspace
3353	table.insert(angBoxes, cut)
3354	end
3355	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3356	if #cuts > 0 then
3357	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3358	for _, c in ipairs(cuts) do c:Destroy() end
3359	if ok and result then
3360	cyl:Destroy()
3361	result.Name = "Coil_3_5_A"; result.Anchored = true; result.Parent = model
3362	else
3363	cyl.Name = "Coil_3_5_A"; cyl.Parent = model
3364	end
3365	else
3366	cyl.Name = "Coil_3_5_A"; cyl.Parent = model
3367	end
3368	end
3369	do
3370	local rightV = Vector3.new(1,0,0).Unit
3371	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3372	local normalV = upV:Cross(rightV)
3373	local pos = Vector3.new(0, -0.08, 0)
3374	local cyl = Instance.new("Part")
3375	cyl.Shape = Enum.PartType.Cylinder
3376	cyl.Size = Vector3.new(0.8, 18.76, 18.76)
3377	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3378	cyl.BrickColor = BrickColor.new("Bright orange")
3379	cyl.Material = Enum.Material.Glacier
3380	cyl.MaterialVariant = "2022 Stud"
3381	cyl.Anchored = true; cyl.Parent = workspace
3382	local cuts = {}
3383	local hole = Instance.new("Part")
3384	hole.Shape = Enum.PartType.Cylinder
3385	hole.Size = Vector3.new(1, 17.16, 17.16)
3386	hole.CFrame = cyl.CFrame
3387	hole.BrickColor = BrickColor.new("Bright orange")
3388	hole.Material = Enum.Material.Glacier
3389	hole.MaterialVariant = "2022 Stud"
3390	hole.Anchored = true; hole.Parent = workspace
3391	table.insert(cuts, hole)
3392	local angBoxes = {}
3393	do
3394	local edgeDir = -1rightV + 0upV
3395	local edgePerp = 0rightV + -1upV
3396	local cut = Instance.new("Part")
3397	cut.Size = Vector3.new(37.52, 1, 37.52)
3398	cut.CFrame = CFrame.fromMatrix(pos + -1 * 18.76 * edgePerp, edgeDir, normalV)
3399	cut.BrickColor = BrickColor.new("Bright orange")
3400	cut.Material = Enum.Material.Glacier
3401	cut.MaterialVariant = "2022 Stud"
3402	cut.Anchored = true; cut.Parent = workspace
3403	table.insert(angBoxes, cut)
3404	end
3405	do
3406	local edgeDir = 1rightV + 0upV
3407	local edgePerp = 0rightV + 1upV
3408	local cut = Instance.new("Part")
3409	cut.Size = Vector3.new(37.52, 1, 37.52)
3410	cut.CFrame = CFrame.fromMatrix(pos + 1 * 18.76 * edgePerp, edgeDir, normalV)
3411	cut.BrickColor = BrickColor.new("Bright orange")
3412	cut.Material = Enum.Material.Glacier
3413	cut.MaterialVariant = "2022 Stud"
3414	cut.Anchored = true; cut.Parent = workspace
3415	table.insert(angBoxes, cut)
3416	end
3417	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3418	if #cuts > 0 then
3419	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3420	for _, c in ipairs(cuts) do c:Destroy() end
3421	if ok and result then
3422	cyl:Destroy()
3423	result.Name = "Coil_3_5_B"; result.Anchored = true; result.Parent = model
3424	else
3425	cyl.Name = "Coil_3_5_B"; cyl.Parent = model
3426	end
3427	else
3428	cyl.Name = "Coil_3_5_B"; cyl.Parent = model
3429	end
3430	end
3431	do
3432	local rightV = Vector3.new(1,0,0).Unit
3433	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3434	local normalV = upV:Cross(rightV)
3435	local pos = Vector3.new(0, 1.18, 0.08)
3436	local cyl = Instance.new("Part")
3437	cyl.Shape = Enum.PartType.Cylinder
3438	cyl.Size = Vector3.new(0.8, 9.6, 9.6)
3439	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3440	cyl.BrickColor = BrickColor.new("Bright orange")
3441	cyl.Material = Enum.Material.Glacier
3442	cyl.MaterialVariant = "2022 Stud"
3443	cyl.Anchored = true; cyl.Parent = workspace
3444	local cuts = {}
3445	local hole = Instance.new("Part")
3446	hole.Shape = Enum.PartType.Cylinder
3447	hole.Size = Vector3.new(1, 8, 8)
3448	hole.CFrame = cyl.CFrame
3449	hole.BrickColor = BrickColor.new("Bright orange")
3450	hole.Material = Enum.Material.Glacier
3451	hole.MaterialVariant = "2022 Stud"
3452	hole.Anchored = true; hole.Parent = workspace
3453	table.insert(cuts, hole)
3454	local angBoxes = {}
3455	do
3456	local edgeDir = 1rightV + 0upV
3457	local edgePerp = 0rightV + 1upV
3458	local cut = Instance.new("Part")
3459	cut.Size = Vector3.new(19.2, 1, 19.2)
3460	cut.CFrame = CFrame.fromMatrix(pos + -1 * 9.6 * edgePerp, edgeDir, normalV)
3461	cut.BrickColor = BrickColor.new("Bright orange")
3462	cut.Material = Enum.Material.Glacier
3463	cut.MaterialVariant = "2022 Stud"
3464	cut.Anchored = true; cut.Parent = workspace
3465	table.insert(angBoxes, cut)
3466	end
3467	do
3468	local edgeDir = -1rightV + 0upV
3469	local edgePerp = 0rightV + -1upV
3470	local cut = Instance.new("Part")
3471	cut.Size = Vector3.new(19.2, 1, 19.2)
3472	cut.CFrame = CFrame.fromMatrix(pos + 1 * 9.6 * edgePerp, edgeDir, normalV)
3473	cut.BrickColor = BrickColor.new("Bright orange")
3474	cut.Material = Enum.Material.Glacier
3475	cut.MaterialVariant = "2022 Stud"
3476	cut.Anchored = true; cut.Parent = workspace
3477	table.insert(angBoxes, cut)
3478	end
3479	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3480	if #cuts > 0 then
3481	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3482	for _, c in ipairs(cuts) do c:Destroy() end
3483	if ok and result then
3484	cyl:Destroy()
3485	result.Name = "Coil_4_0_A"; result.Anchored = true; result.Parent = model
3486	else
3487	cyl.Name = "Coil_4_0_A"; cyl.Parent = model
3488	end
3489	else
3490	cyl.Name = "Coil_4_0_A"; cyl.Parent = model
3491	end
3492	end
3493	do
3494	local rightV = Vector3.new(1,0,0).Unit
3495	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3496	local normalV = upV:Cross(rightV)
3497	local pos = Vector3.new(0, 1.14, -0.04)
3498	local cyl = Instance.new("Part")
3499	cyl.Shape = Enum.PartType.Cylinder
3500	cyl.Size = Vector3.new(0.8, 9.6, 9.6)
3501	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3502	cyl.BrickColor = BrickColor.new("Bright orange")
3503	cyl.Material = Enum.Material.Glacier
3504	cyl.MaterialVariant = "2022 Stud"
3505	cyl.Anchored = true; cyl.Parent = workspace
3506	local cuts = {}
3507	local hole = Instance.new("Part")
3508	hole.Shape = Enum.PartType.Cylinder
3509	hole.Size = Vector3.new(1, 8, 8)
3510	hole.CFrame = cyl.CFrame
3511	hole.BrickColor = BrickColor.new("Bright orange")
3512	hole.Material = Enum.Material.Glacier
3513	hole.MaterialVariant = "2022 Stud"
3514	hole.Anchored = true; hole.Parent = workspace
3515	table.insert(cuts, hole)
3516	local angBoxes = {}
3517	do
3518	local edgeDir = -1rightV + 0upV
3519	local edgePerp = 0rightV + -1upV
3520	local cut = Instance.new("Part")
3521	cut.Size = Vector3.new(19.2, 1, 19.2)
3522	cut.CFrame = CFrame.fromMatrix(pos + -1 * 9.6 * edgePerp, edgeDir, normalV)
3523	cut.BrickColor = BrickColor.new("Bright orange")
3524	cut.Material = Enum.Material.Glacier
3525	cut.MaterialVariant = "2022 Stud"
3526	cut.Anchored = true; cut.Parent = workspace
3527	table.insert(angBoxes, cut)
3528	end
3529	do
3530	local edgeDir = 1rightV + 0upV
3531	local edgePerp = 0rightV + 1upV
3532	local cut = Instance.new("Part")
3533	cut.Size = Vector3.new(19.2, 1, 19.2)
3534	cut.CFrame = CFrame.fromMatrix(pos + 1 * 9.6 * edgePerp, edgeDir, normalV)
3535	cut.BrickColor = BrickColor.new("Bright orange")
3536	cut.Material = Enum.Material.Glacier
3537	cut.MaterialVariant = "2022 Stud"
3538	cut.Anchored = true; cut.Parent = workspace
3539	table.insert(angBoxes, cut)
3540	end
3541	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3542	if #cuts > 0 then
3543	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3544	for _, c in ipairs(cuts) do c:Destroy() end
3545	if ok and result then
3546	cyl:Destroy()
3547	result.Name = "Coil_4_0_B"; result.Anchored = true; result.Parent = model
3548	else
3549	cyl.Name = "Coil_4_0_B"; cyl.Parent = model
3550	end
3551	else
3552	cyl.Name = "Coil_4_0_B"; cyl.Parent = model
3553	end
3554	end
3555	do
3556	local rightV = Vector3.new(1,0,0).Unit
3557	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3558	local normalV = upV:Cross(rightV)
3559	local pos = Vector3.new(0, 1.1, 0.12)
3560	local cyl = Instance.new("Part")
3561	cyl.Shape = Enum.PartType.Cylinder
3562	cyl.Size = Vector3.new(0.8, 11.56, 11.56)
3563	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3564	cyl.BrickColor = BrickColor.new("Bright orange")
3565	cyl.Material = Enum.Material.Glacier
3566	cyl.MaterialVariant = "2022 Stud"
3567	cyl.Anchored = true; cyl.Parent = workspace
3568	local cuts = {}
3569	local hole = Instance.new("Part")
3570	hole.Shape = Enum.PartType.Cylinder
3571	hole.Size = Vector3.new(1, 9.96, 9.96)
3572	hole.CFrame = cyl.CFrame
3573	hole.BrickColor = BrickColor.new("Bright orange")
3574	hole.Material = Enum.Material.Glacier
3575	hole.MaterialVariant = "2022 Stud"
3576	hole.Anchored = true; hole.Parent = workspace
3577	table.insert(cuts, hole)
3578	local angBoxes = {}
3579	do
3580	local edgeDir = 1rightV + 0upV
3581	local edgePerp = 0rightV + 1upV
3582	local cut = Instance.new("Part")
3583	cut.Size = Vector3.new(23.12, 1, 23.12)
3584	cut.CFrame = CFrame.fromMatrix(pos + -1 * 11.56 * edgePerp, edgeDir, normalV)
3585	cut.BrickColor = BrickColor.new("Bright orange")
3586	cut.Material = Enum.Material.Glacier
3587	cut.MaterialVariant = "2022 Stud"
3588	cut.Anchored = true; cut.Parent = workspace
3589	table.insert(angBoxes, cut)
3590	end
3591	do
3592	local edgeDir = -1rightV + 0upV
3593	local edgePerp = 0rightV + -1upV
3594	local cut = Instance.new("Part")
3595	cut.Size = Vector3.new(23.12, 1, 23.12)
3596	cut.CFrame = CFrame.fromMatrix(pos + 1 * 11.56 * edgePerp, edgeDir, normalV)
3597	cut.BrickColor = BrickColor.new("Bright orange")
3598	cut.Material = Enum.Material.Glacier
3599	cut.MaterialVariant = "2022 Stud"
3600	cut.Anchored = true; cut.Parent = workspace
3601	table.insert(angBoxes, cut)
3602	end
3603	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3604	if #cuts > 0 then
3605	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3606	for _, c in ipairs(cuts) do c:Destroy() end
3607	if ok and result then
3608	cyl:Destroy()
3609	result.Name = "Coil_4_1_A"; result.Anchored = true; result.Parent = model
3610	else
3611	cyl.Name = "Coil_4_1_A"; cyl.Parent = model
3612	end
3613	else
3614	cyl.Name = "Coil_4_1_A"; cyl.Parent = model
3615	end
3616	end
3617	do
3618	local rightV = Vector3.new(1,0,0).Unit
3619	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3620	local normalV = upV:Cross(rightV)
3621	local pos = Vector3.new(0, 0.78, 0.08)
3622	local cyl = Instance.new("Part")
3623	cyl.Shape = Enum.PartType.Cylinder
3624	cyl.Size = Vector3.new(0.8, 11.56, 11.56)
3625	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3626	cyl.BrickColor = BrickColor.new("Bright orange")
3627	cyl.Material = Enum.Material.Glacier
3628	cyl.MaterialVariant = "2022 Stud"
3629	cyl.Anchored = true; cyl.Parent = workspace
3630	local cuts = {}
3631	local hole = Instance.new("Part")
3632	hole.Shape = Enum.PartType.Cylinder
3633	hole.Size = Vector3.new(1, 9.96, 9.96)
3634	hole.CFrame = cyl.CFrame
3635	hole.BrickColor = BrickColor.new("Bright orange")
3636	hole.Material = Enum.Material.Glacier
3637	hole.MaterialVariant = "2022 Stud"
3638	hole.Anchored = true; hole.Parent = workspace
3639	table.insert(cuts, hole)
3640	local angBoxes = {}
3641	do
3642	local edgeDir = -1rightV + 0upV
3643	local edgePerp = 0rightV + -1upV
3644	local cut = Instance.new("Part")
3645	cut.Size = Vector3.new(23.12, 1, 23.12)
3646	cut.CFrame = CFrame.fromMatrix(pos + -1 * 11.56 * edgePerp, edgeDir, normalV)
3647	cut.BrickColor = BrickColor.new("Bright orange")
3648	cut.Material = Enum.Material.Glacier
3649	cut.MaterialVariant = "2022 Stud"
3650	cut.Anchored = true; cut.Parent = workspace
3651	table.insert(angBoxes, cut)
3652	end
3653	do
3654	local edgeDir = 1rightV + 0upV
3655	local edgePerp = 0rightV + 1upV
3656	local cut = Instance.new("Part")
3657	cut.Size = Vector3.new(23.12, 1, 23.12)
3658	cut.CFrame = CFrame.fromMatrix(pos + 1 * 11.56 * edgePerp, edgeDir, normalV)
3659	cut.BrickColor = BrickColor.new("Bright orange")
3660	cut.Material = Enum.Material.Glacier
3661	cut.MaterialVariant = "2022 Stud"
3662	cut.Anchored = true; cut.Parent = workspace
3663	table.insert(angBoxes, cut)
3664	end
3665	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3666	if #cuts > 0 then
3667	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3668	for _, c in ipairs(cuts) do c:Destroy() end
3669	if ok and result then
3670	cyl:Destroy()
3671	result.Name = "Coil_4_1_B"; result.Anchored = true; result.Parent = model
3672	else
3673	cyl.Name = "Coil_4_1_B"; cyl.Parent = model
3674	end
3675	else
3676	cyl.Name = "Coil_4_1_B"; cyl.Parent = model
3677	end
3678	end
3679	do
3680	local rightV = Vector3.new(1,0,0).Unit
3681	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3682	local normalV = upV:Cross(rightV)
3683	local pos = Vector3.new(0, 1.06, 0.04)
3684	local cyl = Instance.new("Part")
3685	cyl.Shape = Enum.PartType.Cylinder
3686	cyl.Size = Vector3.new(0.8, 13.12, 13.12)
3687	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3688	cyl.BrickColor = BrickColor.new("Bright orange")
3689	cyl.Material = Enum.Material.Glacier
3690	cyl.MaterialVariant = "2022 Stud"
3691	cyl.Anchored = true; cyl.Parent = workspace
3692	local cuts = {}
3693	local hole = Instance.new("Part")
3694	hole.Shape = Enum.PartType.Cylinder
3695	hole.Size = Vector3.new(1, 11.52, 11.52)
3696	hole.CFrame = cyl.CFrame
3697	hole.BrickColor = BrickColor.new("Bright orange")
3698	hole.Material = Enum.Material.Glacier
3699	hole.MaterialVariant = "2022 Stud"
3700	hole.Anchored = true; hole.Parent = workspace
3701	table.insert(cuts, hole)
3702	local angBoxes = {}
3703	do
3704	local edgeDir = 1rightV + 0upV
3705	local edgePerp = 0rightV + 1upV
3706	local cut = Instance.new("Part")
3707	cut.Size = Vector3.new(26.24, 1, 26.24)
3708	cut.CFrame = CFrame.fromMatrix(pos + -1 * 13.12 * edgePerp, edgeDir, normalV)
3709	cut.BrickColor = BrickColor.new("Bright orange")
3710	cut.Material = Enum.Material.Glacier
3711	cut.MaterialVariant = "2022 Stud"
3712	cut.Anchored = true; cut.Parent = workspace
3713	table.insert(angBoxes, cut)
3714	end
3715	do
3716	local edgeDir = -1rightV + 0upV
3717	local edgePerp = 0rightV + -1upV
3718	local cut = Instance.new("Part")
3719	cut.Size = Vector3.new(26.24, 1, 26.24)
3720	cut.CFrame = CFrame.fromMatrix(pos + 1 * 13.12 * edgePerp, edgeDir, normalV)
3721	cut.BrickColor = BrickColor.new("Bright orange")
3722	cut.Material = Enum.Material.Glacier
3723	cut.MaterialVariant = "2022 Stud"
3724	cut.Anchored = true; cut.Parent = workspace
3725	table.insert(angBoxes, cut)
3726	end
3727	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3728	if #cuts > 0 then
3729	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3730	for _, c in ipairs(cuts) do c:Destroy() end
3731	if ok and result then
3732	cyl:Destroy()
3733	result.Name = "Coil_4_2_A"; result.Anchored = true; result.Parent = model
3734	else
3735	cyl.Name = "Coil_4_2_A"; cyl.Parent = model
3736	end
3737	else
3738	cyl.Name = "Coil_4_2_A"; cyl.Parent = model
3739	end
3740	end
3741	do
3742	local rightV = Vector3.new(1,0,0).Unit
3743	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3744	local normalV = upV:Cross(rightV)
3745	local pos = Vector3.new(0, 0.9, 0)
3746	local cyl = Instance.new("Part")
3747	cyl.Shape = Enum.PartType.Cylinder
3748	cyl.Size = Vector3.new(0.8, 13.12, 13.12)
3749	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3750	cyl.BrickColor = BrickColor.new("Bright orange")
3751	cyl.Material = Enum.Material.Glacier
3752	cyl.MaterialVariant = "2022 Stud"
3753	cyl.Anchored = true; cyl.Parent = workspace
3754	local cuts = {}
3755	local hole = Instance.new("Part")
3756	hole.Shape = Enum.PartType.Cylinder
3757	hole.Size = Vector3.new(1, 11.52, 11.52)
3758	hole.CFrame = cyl.CFrame
3759	hole.BrickColor = BrickColor.new("Bright orange")
3760	hole.Material = Enum.Material.Glacier
3761	hole.MaterialVariant = "2022 Stud"
3762	hole.Anchored = true; hole.Parent = workspace
3763	table.insert(cuts, hole)
3764	local angBoxes = {}
3765	do
3766	local edgeDir = -1rightV + 0upV
3767	local edgePerp = 0rightV + -1upV
3768	local cut = Instance.new("Part")
3769	cut.Size = Vector3.new(26.24, 1, 26.24)
3770	cut.CFrame = CFrame.fromMatrix(pos + -1 * 13.12 * edgePerp, edgeDir, normalV)
3771	cut.BrickColor = BrickColor.new("Bright orange")
3772	cut.Material = Enum.Material.Glacier
3773	cut.MaterialVariant = "2022 Stud"
3774	cut.Anchored = true; cut.Parent = workspace
3775	table.insert(angBoxes, cut)
3776	end
3777	do
3778	local edgeDir = 1rightV + 0upV
3779	local edgePerp = 0rightV + 1upV
3780	local cut = Instance.new("Part")
3781	cut.Size = Vector3.new(26.24, 1, 26.24)
3782	cut.CFrame = CFrame.fromMatrix(pos + 1 * 13.12 * edgePerp, edgeDir, normalV)
3783	cut.BrickColor = BrickColor.new("Bright orange")
3784	cut.Material = Enum.Material.Glacier
3785	cut.MaterialVariant = "2022 Stud"
3786	cut.Anchored = true; cut.Parent = workspace
3787	table.insert(angBoxes, cut)
3788	end
3789	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3790	if #cuts > 0 then
3791	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3792	for _, c in ipairs(cuts) do c:Destroy() end
3793	if ok and result then
3794	cyl:Destroy()
3795	result.Name = "Coil_4_2_B"; result.Anchored = true; result.Parent = model
3796	else
3797	cyl.Name = "Coil_4_2_B"; cyl.Parent = model
3798	end
3799	else
3800	cyl.Name = "Coil_4_2_B"; cyl.Parent = model
3801	end
3802	end
3803	do
3804	local rightV = Vector3.new(1,0,0).Unit
3805	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3806	local normalV = upV:Cross(rightV)
3807	local pos = Vector3.new(0, 1.02, 0.12)
3808	local cyl = Instance.new("Part")
3809	cyl.Shape = Enum.PartType.Cylinder
3810	cyl.Size = Vector3.new(0.8, 15.08, 15.08)
3811	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3812	cyl.BrickColor = BrickColor.new("Bright orange")
3813	cyl.Material = Enum.Material.Glacier
3814	cyl.MaterialVariant = "2022 Stud"
3815	cyl.Anchored = true; cyl.Parent = workspace
3816	local cuts = {}
3817	local hole = Instance.new("Part")
3818	hole.Shape = Enum.PartType.Cylinder
3819	hole.Size = Vector3.new(1, 13.48, 13.48)
3820	hole.CFrame = cyl.CFrame
3821	hole.BrickColor = BrickColor.new("Bright orange")
3822	hole.Material = Enum.Material.Glacier
3823	hole.MaterialVariant = "2022 Stud"
3824	hole.Anchored = true; hole.Parent = workspace
3825	table.insert(cuts, hole)
3826	local angBoxes = {}
3827	do
3828	local edgeDir = 1rightV + 0upV
3829	local edgePerp = 0rightV + 1upV
3830	local cut = Instance.new("Part")
3831	cut.Size = Vector3.new(30.16, 1, 30.16)
3832	cut.CFrame = CFrame.fromMatrix(pos + -1 * 15.08 * edgePerp, edgeDir, normalV)
3833	cut.BrickColor = BrickColor.new("Bright orange")
3834	cut.Material = Enum.Material.Glacier
3835	cut.MaterialVariant = "2022 Stud"
3836	cut.Anchored = true; cut.Parent = workspace
3837	table.insert(angBoxes, cut)
3838	end
3839	do
3840	local edgeDir = -1rightV + 0upV
3841	local edgePerp = 0rightV + -1upV
3842	local cut = Instance.new("Part")
3843	cut.Size = Vector3.new(30.16, 1, 30.16)
3844	cut.CFrame = CFrame.fromMatrix(pos + 1 * 15.08 * edgePerp, edgeDir, normalV)
3845	cut.BrickColor = BrickColor.new("Bright orange")
3846	cut.Material = Enum.Material.Glacier
3847	cut.MaterialVariant = "2022 Stud"
3848	cut.Anchored = true; cut.Parent = workspace
3849	table.insert(angBoxes, cut)
3850	end
3851	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3852	if #cuts > 0 then
3853	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3854	for _, c in ipairs(cuts) do c:Destroy() end
3855	if ok and result then
3856	cyl:Destroy()
3857	result.Name = "Coil_4_3_A"; result.Anchored = true; result.Parent = model
3858	else
3859	cyl.Name = "Coil_4_3_A"; cyl.Parent = model
3860	end
3861	else
3862	cyl.Name = "Coil_4_3_A"; cyl.Parent = model
3863	end
3864	end
3865	do
3866	local rightV = Vector3.new(1,0,0).Unit
3867	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3868	local normalV = upV:Cross(rightV)
3869	local pos = Vector3.new(0, 0.86, 0.08)
3870	local cyl = Instance.new("Part")
3871	cyl.Shape = Enum.PartType.Cylinder
3872	cyl.Size = Vector3.new(0.8, 15.08, 15.08)
3873	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3874	cyl.BrickColor = BrickColor.new("Bright orange")
3875	cyl.Material = Enum.Material.Glacier
3876	cyl.MaterialVariant = "2022 Stud"
3877	cyl.Anchored = true; cyl.Parent = workspace
3878	local cuts = {}
3879	local hole = Instance.new("Part")
3880	hole.Shape = Enum.PartType.Cylinder
3881	hole.Size = Vector3.new(1, 13.48, 13.48)
3882	hole.CFrame = cyl.CFrame
3883	hole.BrickColor = BrickColor.new("Bright orange")
3884	hole.Material = Enum.Material.Glacier
3885	hole.MaterialVariant = "2022 Stud"
3886	hole.Anchored = true; hole.Parent = workspace
3887	table.insert(cuts, hole)
3888	local angBoxes = {}
3889	do
3890	local edgeDir = -1rightV + 0upV
3891	local edgePerp = 0rightV + -1upV
3892	local cut = Instance.new("Part")
3893	cut.Size = Vector3.new(30.16, 1, 30.16)
3894	cut.CFrame = CFrame.fromMatrix(pos + -1 * 15.08 * edgePerp, edgeDir, normalV)
3895	cut.BrickColor = BrickColor.new("Bright orange")
3896	cut.Material = Enum.Material.Glacier
3897	cut.MaterialVariant = "2022 Stud"
3898	cut.Anchored = true; cut.Parent = workspace
3899	table.insert(angBoxes, cut)
3900	end
3901	do
3902	local edgeDir = 1rightV + 0upV
3903	local edgePerp = 0rightV + 1upV
3904	local cut = Instance.new("Part")
3905	cut.Size = Vector3.new(30.16, 1, 30.16)
3906	cut.CFrame = CFrame.fromMatrix(pos + 1 * 15.08 * edgePerp, edgeDir, normalV)
3907	cut.BrickColor = BrickColor.new("Bright orange")
3908	cut.Material = Enum.Material.Glacier
3909	cut.MaterialVariant = "2022 Stud"
3910	cut.Anchored = true; cut.Parent = workspace
3911	table.insert(angBoxes, cut)
3912	end
3913	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3914	if #cuts > 0 then
3915	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3916	for _, c in ipairs(cuts) do c:Destroy() end
3917	if ok and result then
3918	cyl:Destroy()
3919	result.Name = "Coil_4_3_B"; result.Anchored = true; result.Parent = model
3920	else
3921	cyl.Name = "Coil_4_3_B"; cyl.Parent = model
3922	end
3923	else
3924	cyl.Name = "Coil_4_3_B"; cyl.Parent = model
3925	end
3926	end
3927	do
3928	local rightV = Vector3.new(1,0,0).Unit
3929	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3930	local normalV = upV:Cross(rightV)
3931	local pos = Vector3.new(0, 0.98, 0.04)
3932	local cyl = Instance.new("Part")
3933	cyl.Shape = Enum.PartType.Cylinder
3934	cyl.Size = Vector3.new(0.8, 16.64, 16.64)
3935	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3936	cyl.BrickColor = BrickColor.new("Bright orange")
3937	cyl.Material = Enum.Material.Glacier
3938	cyl.MaterialVariant = "2022 Stud"
3939	cyl.Anchored = true; cyl.Parent = workspace
3940	local cuts = {}
3941	local hole = Instance.new("Part")
3942	hole.Shape = Enum.PartType.Cylinder
3943	hole.Size = Vector3.new(1, 15.04, 15.04)
3944	hole.CFrame = cyl.CFrame
3945	hole.BrickColor = BrickColor.new("Bright orange")
3946	hole.Material = Enum.Material.Glacier
3947	hole.MaterialVariant = "2022 Stud"
3948	hole.Anchored = true; hole.Parent = workspace
3949	table.insert(cuts, hole)
3950	local angBoxes = {}
3951	do
3952	local edgeDir = 1rightV + 0upV
3953	local edgePerp = 0rightV + 1upV
3954	local cut = Instance.new("Part")
3955	cut.Size = Vector3.new(33.28, 1, 33.28)
3956	cut.CFrame = CFrame.fromMatrix(pos + -1 * 16.64 * edgePerp, edgeDir, normalV)
3957	cut.BrickColor = BrickColor.new("Bright orange")
3958	cut.Material = Enum.Material.Glacier
3959	cut.MaterialVariant = "2022 Stud"
3960	cut.Anchored = true; cut.Parent = workspace
3961	table.insert(angBoxes, cut)
3962	end
3963	do
3964	local edgeDir = -1rightV + 0upV
3965	local edgePerp = 0rightV + -1upV
3966	local cut = Instance.new("Part")
3967	cut.Size = Vector3.new(33.28, 1, 33.28)
3968	cut.CFrame = CFrame.fromMatrix(pos + 1 * 16.64 * edgePerp, edgeDir, normalV)
3969	cut.BrickColor = BrickColor.new("Bright orange")
3970	cut.Material = Enum.Material.Glacier
3971	cut.MaterialVariant = "2022 Stud"
3972	cut.Anchored = true; cut.Parent = workspace
3973	table.insert(angBoxes, cut)
3974	end
3975	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
3976	if #cuts > 0 then
3977	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
3978	for _, c in ipairs(cuts) do c:Destroy() end
3979	if ok and result then
3980	cyl:Destroy()
3981	result.Name = "Coil_4_4_A"; result.Anchored = true; result.Parent = model
3982	else
3983	cyl.Name = "Coil_4_4_A"; cyl.Parent = model
3984	end
3985	else
3986	cyl.Name = "Coil_4_4_A"; cyl.Parent = model
3987	end
3988	end
3989	do
3990	local rightV = Vector3.new(1,0,0).Unit
3991	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
3992	local normalV = upV:Cross(rightV)
3993	local pos = Vector3.new(0, 0.94, 0)
3994	local cyl = Instance.new("Part")
3995	cyl.Shape = Enum.PartType.Cylinder
3996	cyl.Size = Vector3.new(0.8, 16.64, 16.64)
3997	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
3998	cyl.BrickColor = BrickColor.new("Bright orange")
3999	cyl.Material = Enum.Material.Glacier
4000	cyl.MaterialVariant = "2022 Stud"
4001	cyl.Anchored = true; cyl.Parent = workspace
4002	local cuts = {}
4003	local hole = Instance.new("Part")
4004	hole.Shape = Enum.PartType.Cylinder
4005	hole.Size = Vector3.new(1, 15.04, 15.04)
4006	hole.CFrame = cyl.CFrame
4007	hole.BrickColor = BrickColor.new("Bright orange")
4008	hole.Material = Enum.Material.Glacier
4009	hole.MaterialVariant = "2022 Stud"
4010	hole.Anchored = true; hole.Parent = workspace
4011	table.insert(cuts, hole)
4012	local angBoxes = {}
4013	do
4014	local edgeDir = -1rightV + 0upV
4015	local edgePerp = 0rightV + -1upV
4016	local cut = Instance.new("Part")
4017	cut.Size = Vector3.new(33.28, 1, 33.28)
4018	cut.CFrame = CFrame.fromMatrix(pos + -1 * 16.64 * edgePerp, edgeDir, normalV)
4019	cut.BrickColor = BrickColor.new("Bright orange")
4020	cut.Material = Enum.Material.Glacier
4021	cut.MaterialVariant = "2022 Stud"
4022	cut.Anchored = true; cut.Parent = workspace
4023	table.insert(angBoxes, cut)
4024	end
4025	do
4026	local edgeDir = 1rightV + 0upV
4027	local edgePerp = 0rightV + 1upV
4028	local cut = Instance.new("Part")
4029	cut.Size = Vector3.new(33.28, 1, 33.28)
4030	cut.CFrame = CFrame.fromMatrix(pos + 1 * 16.64 * edgePerp, edgeDir, normalV)
4031	cut.BrickColor = BrickColor.new("Bright orange")
4032	cut.Material = Enum.Material.Glacier
4033	cut.MaterialVariant = "2022 Stud"
4034	cut.Anchored = true; cut.Parent = workspace
4035	table.insert(angBoxes, cut)
4036	end
4037	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4038	if #cuts > 0 then
4039	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4040	for _, c in ipairs(cuts) do c:Destroy() end
4041	if ok and result then
4042	cyl:Destroy()
4043	result.Name = "Coil_4_4_B"; result.Anchored = true; result.Parent = model
4044	else
4045	cyl.Name = "Coil_4_4_B"; cyl.Parent = model
4046	end
4047	else
4048	cyl.Name = "Coil_4_4_B"; cyl.Parent = model
4049	end
4050	end
4051	do
4052	local rightV = Vector3.new(1,0,0).Unit
4053	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4054	local normalV = upV:Cross(rightV)
4055	local pos = Vector3.new(0, 0.86, 0.04)
4056	local cyl = Instance.new("Part")
4057	cyl.Shape = Enum.PartType.Cylinder
4058	cyl.Size = Vector3.new(0.8, 18.6, 18.6)
4059	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4060	cyl.BrickColor = BrickColor.new("Bright orange")
4061	cyl.Material = Enum.Material.Glacier
4062	cyl.MaterialVariant = "2022 Stud"
4063	cyl.Anchored = true; cyl.Parent = workspace
4064	local cuts = {}
4065	local hole = Instance.new("Part")
4066	hole.Shape = Enum.PartType.Cylinder
4067	hole.Size = Vector3.new(1, 17, 17)
4068	hole.CFrame = cyl.CFrame
4069	hole.BrickColor = BrickColor.new("Bright orange")
4070	hole.Material = Enum.Material.Glacier
4071	hole.MaterialVariant = "2022 Stud"
4072	hole.Anchored = true; hole.Parent = workspace
4073	table.insert(cuts, hole)
4074	local angBoxes = {}
4075	do
4076	local edgeDir = 1rightV + 0upV
4077	local edgePerp = 0rightV + 1upV
4078	local cut = Instance.new("Part")
4079	cut.Size = Vector3.new(37.2, 1, 37.2)
4080	cut.CFrame = CFrame.fromMatrix(pos + -1 * 18.6 * edgePerp, edgeDir, normalV)
4081	cut.BrickColor = BrickColor.new("Bright orange")
4082	cut.Material = Enum.Material.Glacier
4083	cut.MaterialVariant = "2022 Stud"
4084	cut.Anchored = true; cut.Parent = workspace
4085	table.insert(angBoxes, cut)
4086	end
4087	do
4088	local edgeDir = -1rightV + 0upV
4089	local edgePerp = 0rightV + -1upV
4090	local cut = Instance.new("Part")
4091	cut.Size = Vector3.new(37.2, 1, 37.2)
4092	cut.CFrame = CFrame.fromMatrix(pos + 1 * 18.6 * edgePerp, edgeDir, normalV)
4093	cut.BrickColor = BrickColor.new("Bright orange")
4094	cut.Material = Enum.Material.Glacier
4095	cut.MaterialVariant = "2022 Stud"
4096	cut.Anchored = true; cut.Parent = workspace
4097	table.insert(angBoxes, cut)
4098	end
4099	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4100	if #cuts > 0 then
4101	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4102	for _, c in ipairs(cuts) do c:Destroy() end
4103	if ok and result then
4104	cyl:Destroy()
4105	result.Name = "Coil_4_5_A"; result.Anchored = true; result.Parent = model
4106	else
4107	cyl.Name = "Coil_4_5_A"; cyl.Parent = model
4108	end
4109	else
4110	cyl.Name = "Coil_4_5_A"; cyl.Parent = model
4111	end
4112	end
4113	do
4114	local rightV = Vector3.new(1,0,0).Unit
4115	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4116	local normalV = upV:Cross(rightV)
4117	local pos = Vector3.new(0, 0.82, 0)
4118	local cyl = Instance.new("Part")
4119	cyl.Shape = Enum.PartType.Cylinder
4120	cyl.Size = Vector3.new(0.8, 18.6, 18.6)
4121	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4122	cyl.BrickColor = BrickColor.new("Bright orange")
4123	cyl.Material = Enum.Material.Glacier
4124	cyl.MaterialVariant = "2022 Stud"
4125	cyl.Anchored = true; cyl.Parent = workspace
4126	local cuts = {}
4127	local hole = Instance.new("Part")
4128	hole.Shape = Enum.PartType.Cylinder
4129	hole.Size = Vector3.new(1, 17, 17)
4130	hole.CFrame = cyl.CFrame
4131	hole.BrickColor = BrickColor.new("Bright orange")
4132	hole.Material = Enum.Material.Glacier
4133	hole.MaterialVariant = "2022 Stud"
4134	hole.Anchored = true; hole.Parent = workspace
4135	table.insert(cuts, hole)
4136	local angBoxes = {}
4137	do
4138	local edgeDir = -1rightV + 0upV
4139	local edgePerp = 0rightV + -1upV
4140	local cut = Instance.new("Part")
4141	cut.Size = Vector3.new(37.2, 1, 37.2)
4142	cut.CFrame = CFrame.fromMatrix(pos + -1 * 18.6 * edgePerp, edgeDir, normalV)
4143	cut.BrickColor = BrickColor.new("Bright orange")
4144	cut.Material = Enum.Material.Glacier
4145	cut.MaterialVariant = "2022 Stud"
4146	cut.Anchored = true; cut.Parent = workspace
4147	table.insert(angBoxes, cut)
4148	end
4149	do
4150	local edgeDir = 1rightV + 0upV
4151	local edgePerp = 0rightV + 1upV
4152	local cut = Instance.new("Part")
4153	cut.Size = Vector3.new(37.2, 1, 37.2)
4154	cut.CFrame = CFrame.fromMatrix(pos + 1 * 18.6 * edgePerp, edgeDir, normalV)
4155	cut.BrickColor = BrickColor.new("Bright orange")
4156	cut.Material = Enum.Material.Glacier
4157	cut.MaterialVariant = "2022 Stud"
4158	cut.Anchored = true; cut.Parent = workspace
4159	table.insert(angBoxes, cut)
4160	end
4161	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4162	if #cuts > 0 then
4163	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4164	for _, c in ipairs(cuts) do c:Destroy() end
4165	if ok and result then
4166	cyl:Destroy()
4167	result.Name = "Coil_4_5_B"; result.Anchored = true; result.Parent = model
4168	else
4169	cyl.Name = "Coil_4_5_B"; cyl.Parent = model
4170	end
4171	else
4172	cyl.Name = "Coil_4_5_B"; cyl.Parent = model
4173	end
4174	end
4175	do
4176	local rightV = Vector3.new(1,0,0).Unit
4177	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4178	local normalV = upV:Cross(rightV)
4179	local pos = Vector3.new(0, 1.52, 0.04)
4180	local cyl = Instance.new("Part")
4181	cyl.Shape = Enum.PartType.Cylinder
4182	cyl.Size = Vector3.new(0.8, 9.44, 9.44)
4183	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4184	cyl.BrickColor = BrickColor.new("Bright orange")
4185	cyl.Material = Enum.Material.Glacier
4186	cyl.MaterialVariant = "2022 Stud"
4187	cyl.Anchored = true; cyl.Parent = workspace
4188	local cuts = {}
4189	local hole = Instance.new("Part")
4190	hole.Shape = Enum.PartType.Cylinder
4191	hole.Size = Vector3.new(1, 7.84, 7.84)
4192	hole.CFrame = cyl.CFrame
4193	hole.BrickColor = BrickColor.new("Bright orange")
4194	hole.Material = Enum.Material.Glacier
4195	hole.MaterialVariant = "2022 Stud"
4196	hole.Anchored = true; hole.Parent = workspace
4197	table.insert(cuts, hole)
4198	local angBoxes = {}
4199	do
4200	local edgeDir = 1rightV + 0upV
4201	local edgePerp = 0rightV + 1upV
4202	local cut = Instance.new("Part")
4203	cut.Size = Vector3.new(18.88, 1, 18.88)
4204	cut.CFrame = CFrame.fromMatrix(pos + -1 * 9.44 * edgePerp, edgeDir, normalV)
4205	cut.BrickColor = BrickColor.new("Bright orange")
4206	cut.Material = Enum.Material.Glacier
4207	cut.MaterialVariant = "2022 Stud"
4208	cut.Anchored = true; cut.Parent = workspace
4209	table.insert(angBoxes, cut)
4210	end
4211	do
4212	local edgeDir = -1rightV + 0upV
4213	local edgePerp = 0rightV + -1upV
4214	local cut = Instance.new("Part")
4215	cut.Size = Vector3.new(18.88, 1, 18.88)
4216	cut.CFrame = CFrame.fromMatrix(pos + 1 * 9.44 * edgePerp, edgeDir, normalV)
4217	cut.BrickColor = BrickColor.new("Bright orange")
4218	cut.Material = Enum.Material.Glacier
4219	cut.MaterialVariant = "2022 Stud"
4220	cut.Anchored = true; cut.Parent = workspace
4221	table.insert(angBoxes, cut)
4222	end
4223	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4224	if #cuts > 0 then
4225	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4226	for _, c in ipairs(cuts) do c:Destroy() end
4227	if ok and result then
4228	cyl:Destroy()
4229	result.Name = "Coil_5_0_A"; result.Anchored = true; result.Parent = model
4230	else
4231	cyl.Name = "Coil_5_0_A"; cyl.Parent = model
4232	end
4233	else
4234	cyl.Name = "Coil_5_0_A"; cyl.Parent = model
4235	end
4236	end
4237	do
4238	local rightV = Vector3.new(1,0,0).Unit
4239	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4240	local normalV = upV:Cross(rightV)
4241	local pos = Vector3.new(0, 1.56, 0)
4242	local cyl = Instance.new("Part")
4243	cyl.Shape = Enum.PartType.Cylinder
4244	cyl.Size = Vector3.new(0.8, 9.44, 9.44)
4245	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4246	cyl.BrickColor = BrickColor.new("Bright orange")
4247	cyl.Material = Enum.Material.Glacier
4248	cyl.MaterialVariant = "2022 Stud"
4249	cyl.Anchored = true; cyl.Parent = workspace
4250	local cuts = {}
4251	local hole = Instance.new("Part")
4252	hole.Shape = Enum.PartType.Cylinder
4253	hole.Size = Vector3.new(1, 7.84, 7.84)
4254	hole.CFrame = cyl.CFrame
4255	hole.BrickColor = BrickColor.new("Bright orange")
4256	hole.Material = Enum.Material.Glacier
4257	hole.MaterialVariant = "2022 Stud"
4258	hole.Anchored = true; hole.Parent = workspace
4259	table.insert(cuts, hole)
4260	local angBoxes = {}
4261	do
4262	local edgeDir = -1rightV + 0upV
4263	local edgePerp = 0rightV + -1upV
4264	local cut = Instance.new("Part")
4265	cut.Size = Vector3.new(18.88, 1, 18.88)
4266	cut.CFrame = CFrame.fromMatrix(pos + -1 * 9.44 * edgePerp, edgeDir, normalV)
4267	cut.BrickColor = BrickColor.new("Bright orange")
4268	cut.Material = Enum.Material.Glacier
4269	cut.MaterialVariant = "2022 Stud"
4270	cut.Anchored = true; cut.Parent = workspace
4271	table.insert(angBoxes, cut)
4272	end
4273	do
4274	local edgeDir = 1rightV + 0upV
4275	local edgePerp = 0rightV + 1upV
4276	local cut = Instance.new("Part")
4277	cut.Size = Vector3.new(18.88, 1, 18.88)
4278	cut.CFrame = CFrame.fromMatrix(pos + 1 * 9.44 * edgePerp, edgeDir, normalV)
4279	cut.BrickColor = BrickColor.new("Bright orange")
4280	cut.Material = Enum.Material.Glacier
4281	cut.MaterialVariant = "2022 Stud"
4282	cut.Anchored = true; cut.Parent = workspace
4283	table.insert(angBoxes, cut)
4284	end
4285	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4286	if #cuts > 0 then
4287	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4288	for _, c in ipairs(cuts) do c:Destroy() end
4289	if ok and result then
4290	cyl:Destroy()
4291	result.Name = "Coil_5_0_B"; result.Anchored = true; result.Parent = model
4292	else
4293	cyl.Name = "Coil_5_0_B"; cyl.Parent = model
4294	end
4295	else
4296	cyl.Name = "Coil_5_0_B"; cyl.Parent = model
4297	end
4298	end
4299	do
4300	local rightV = Vector3.new(1,0,0).Unit
4301	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4302	local normalV = upV:Cross(rightV)
4303	local pos = Vector3.new(0, 1.88, 0.04)
4304	local cyl = Instance.new("Part")
4305	cyl.Shape = Enum.PartType.Cylinder
4306	cyl.Size = Vector3.new(0.8, 11.4, 11.4)
4307	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4308	cyl.BrickColor = BrickColor.new("Bright orange")
4309	cyl.Material = Enum.Material.Glacier
4310	cyl.MaterialVariant = "2022 Stud"
4311	cyl.Anchored = true; cyl.Parent = workspace
4312	local cuts = {}
4313	local hole = Instance.new("Part")
4314	hole.Shape = Enum.PartType.Cylinder
4315	hole.Size = Vector3.new(1, 9.8, 9.8)
4316	hole.CFrame = cyl.CFrame
4317	hole.BrickColor = BrickColor.new("Bright orange")
4318	hole.Material = Enum.Material.Glacier
4319	hole.MaterialVariant = "2022 Stud"
4320	hole.Anchored = true; hole.Parent = workspace
4321	table.insert(cuts, hole)
4322	local angBoxes = {}
4323	do
4324	local edgeDir = 1rightV + 0upV
4325	local edgePerp = 0rightV + 1upV
4326	local cut = Instance.new("Part")
4327	cut.Size = Vector3.new(22.8, 1, 22.8)
4328	cut.CFrame = CFrame.fromMatrix(pos + -1 * 11.4 * edgePerp, edgeDir, normalV)
4329	cut.BrickColor = BrickColor.new("Bright orange")
4330	cut.Material = Enum.Material.Glacier
4331	cut.MaterialVariant = "2022 Stud"
4332	cut.Anchored = true; cut.Parent = workspace
4333	table.insert(angBoxes, cut)
4334	end
4335	do
4336	local edgeDir = -1rightV + 0upV
4337	local edgePerp = 0rightV + -1upV
4338	local cut = Instance.new("Part")
4339	cut.Size = Vector3.new(22.8, 1, 22.8)
4340	cut.CFrame = CFrame.fromMatrix(pos + 1 * 11.4 * edgePerp, edgeDir, normalV)
4341	cut.BrickColor = BrickColor.new("Bright orange")
4342	cut.Material = Enum.Material.Glacier
4343	cut.MaterialVariant = "2022 Stud"
4344	cut.Anchored = true; cut.Parent = workspace
4345	table.insert(angBoxes, cut)
4346	end
4347	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4348	if #cuts > 0 then
4349	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4350	for _, c in ipairs(cuts) do c:Destroy() end
4351	if ok and result then
4352	cyl:Destroy()
4353	result.Name = "Coil_5_1_A"; result.Anchored = true; result.Parent = model
4354	else
4355	cyl.Name = "Coil_5_1_A"; cyl.Parent = model
4356	end
4357	else
4358	cyl.Name = "Coil_5_1_A"; cyl.Parent = model
4359	end
4360	end
4361	do
4362	local rightV = Vector3.new(1,0,0).Unit
4363	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4364	local normalV = upV:Cross(rightV)
4365	local pos = Vector3.new(0, 1.6, 0)
4366	local cyl = Instance.new("Part")
4367	cyl.Shape = Enum.PartType.Cylinder
4368	cyl.Size = Vector3.new(0.8, 11.4, 11.4)
4369	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4370	cyl.BrickColor = BrickColor.new("Bright orange")
4371	cyl.Material = Enum.Material.Glacier
4372	cyl.MaterialVariant = "2022 Stud"
4373	cyl.Anchored = true; cyl.Parent = workspace
4374	local cuts = {}
4375	local hole = Instance.new("Part")
4376	hole.Shape = Enum.PartType.Cylinder
4377	hole.Size = Vector3.new(1, 9.8, 9.8)
4378	hole.CFrame = cyl.CFrame
4379	hole.BrickColor = BrickColor.new("Bright orange")
4380	hole.Material = Enum.Material.Glacier
4381	hole.MaterialVariant = "2022 Stud"
4382	hole.Anchored = true; hole.Parent = workspace
4383	table.insert(cuts, hole)
4384	local angBoxes = {}
4385	do
4386	local edgeDir = -1rightV + 0upV
4387	local edgePerp = 0rightV + -1upV
4388	local cut = Instance.new("Part")
4389	cut.Size = Vector3.new(22.8, 1, 22.8)
4390	cut.CFrame = CFrame.fromMatrix(pos + -1 * 11.4 * edgePerp, edgeDir, normalV)
4391	cut.BrickColor = BrickColor.new("Bright orange")
4392	cut.Material = Enum.Material.Glacier
4393	cut.MaterialVariant = "2022 Stud"
4394	cut.Anchored = true; cut.Parent = workspace
4395	table.insert(angBoxes, cut)
4396	end
4397	do
4398	local edgeDir = 1rightV + 0upV
4399	local edgePerp = 0rightV + 1upV
4400	local cut = Instance.new("Part")
4401	cut.Size = Vector3.new(22.8, 1, 22.8)
4402	cut.CFrame = CFrame.fromMatrix(pos + 1 * 11.4 * edgePerp, edgeDir, normalV)
4403	cut.BrickColor = BrickColor.new("Bright orange")
4404	cut.Material = Enum.Material.Glacier
4405	cut.MaterialVariant = "2022 Stud"
4406	cut.Anchored = true; cut.Parent = workspace
4407	table.insert(angBoxes, cut)
4408	end
4409	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4410	if #cuts > 0 then
4411	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4412	for _, c in ipairs(cuts) do c:Destroy() end
4413	if ok and result then
4414	cyl:Destroy()
4415	result.Name = "Coil_5_1_B"; result.Anchored = true; result.Parent = model
4416	else
4417	cyl.Name = "Coil_5_1_B"; cyl.Parent = model
4418	end
4419	else
4420	cyl.Name = "Coil_5_1_B"; cyl.Parent = model
4421	end
4422	end
4423	do
4424	local rightV = Vector3.new(1,0,0).Unit
4425	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4426	local normalV = upV:Cross(rightV)
4427	local pos = Vector3.new(0, 1.64, 0.12)
4428	local cyl = Instance.new("Part")
4429	cyl.Shape = Enum.PartType.Cylinder
4430	cyl.Size = Vector3.new(0.8, 13.36, 13.36)
4431	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4432	cyl.BrickColor = BrickColor.new("Bright orange")
4433	cyl.Material = Enum.Material.Glacier
4434	cyl.MaterialVariant = "2022 Stud"
4435	cyl.Anchored = true; cyl.Parent = workspace
4436	local cuts = {}
4437	local hole = Instance.new("Part")
4438	hole.Shape = Enum.PartType.Cylinder
4439	hole.Size = Vector3.new(1, 11.76, 11.76)
4440	hole.CFrame = cyl.CFrame
4441	hole.BrickColor = BrickColor.new("Bright orange")
4442	hole.Material = Enum.Material.Glacier
4443	hole.MaterialVariant = "2022 Stud"
4444	hole.Anchored = true; hole.Parent = workspace
4445	table.insert(cuts, hole)
4446	local angBoxes = {}
4447	do
4448	local edgeDir = 1rightV + 0upV
4449	local edgePerp = 0rightV + 1upV
4450	local cut = Instance.new("Part")
4451	cut.Size = Vector3.new(26.72, 1, 26.72)
4452	cut.CFrame = CFrame.fromMatrix(pos + -1 * 13.36 * edgePerp, edgeDir, normalV)
4453	cut.BrickColor = BrickColor.new("Bright orange")
4454	cut.Material = Enum.Material.Glacier
4455	cut.MaterialVariant = "2022 Stud"
4456	cut.Anchored = true; cut.Parent = workspace
4457	table.insert(angBoxes, cut)
4458	end
4459	do
4460	local edgeDir = -1rightV + 0upV
4461	local edgePerp = 0rightV + -1upV
4462	local cut = Instance.new("Part")
4463	cut.Size = Vector3.new(26.72, 1, 26.72)
4464	cut.CFrame = CFrame.fromMatrix(pos + 1 * 13.36 * edgePerp, edgeDir, normalV)
4465	cut.BrickColor = BrickColor.new("Bright orange")
4466	cut.Material = Enum.Material.Glacier
4467	cut.MaterialVariant = "2022 Stud"
4468	cut.Anchored = true; cut.Parent = workspace
4469	table.insert(angBoxes, cut)
4470	end
4471	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4472	if #cuts > 0 then
4473	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4474	for _, c in ipairs(cuts) do c:Destroy() end
4475	if ok and result then
4476	cyl:Destroy()
4477	result.Name = "Coil_5_2_A"; result.Anchored = true; result.Parent = model
4478	else
4479	cyl.Name = "Coil_5_2_A"; cyl.Parent = model
4480	end
4481	else
4482	cyl.Name = "Coil_5_2_A"; cyl.Parent = model
4483	end
4484	end
4485	do
4486	local rightV = Vector3.new(1,0,0).Unit
4487	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4488	local normalV = upV:Cross(rightV)
4489	local pos = Vector3.new(0, 1.76, 0.08)
4490	local cyl = Instance.new("Part")
4491	cyl.Shape = Enum.PartType.Cylinder
4492	cyl.Size = Vector3.new(0.8, 13.36, 13.36)
4493	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4494	cyl.BrickColor = BrickColor.new("Bright orange")
4495	cyl.Material = Enum.Material.Glacier
4496	cyl.MaterialVariant = "2022 Stud"
4497	cyl.Anchored = true; cyl.Parent = workspace
4498	local cuts = {}
4499	local hole = Instance.new("Part")
4500	hole.Shape = Enum.PartType.Cylinder
4501	hole.Size = Vector3.new(1, 11.76, 11.76)
4502	hole.CFrame = cyl.CFrame
4503	hole.BrickColor = BrickColor.new("Bright orange")
4504	hole.Material = Enum.Material.Glacier
4505	hole.MaterialVariant = "2022 Stud"
4506	hole.Anchored = true; hole.Parent = workspace
4507	table.insert(cuts, hole)
4508	local angBoxes = {}
4509	do
4510	local edgeDir = -1rightV + 0upV
4511	local edgePerp = 0rightV + -1upV
4512	local cut = Instance.new("Part")
4513	cut.Size = Vector3.new(26.72, 1, 26.72)
4514	cut.CFrame = CFrame.fromMatrix(pos + -1 * 13.36 * edgePerp, edgeDir, normalV)
4515	cut.BrickColor = BrickColor.new("Bright orange")
4516	cut.Material = Enum.Material.Glacier
4517	cut.MaterialVariant = "2022 Stud"
4518	cut.Anchored = true; cut.Parent = workspace
4519	table.insert(angBoxes, cut)
4520	end
4521	do
4522	local edgeDir = 1rightV + 0upV
4523	local edgePerp = 0rightV + 1upV
4524	local cut = Instance.new("Part")
4525	cut.Size = Vector3.new(26.72, 1, 26.72)
4526	cut.CFrame = CFrame.fromMatrix(pos + 1 * 13.36 * edgePerp, edgeDir, normalV)
4527	cut.BrickColor = BrickColor.new("Bright orange")
4528	cut.Material = Enum.Material.Glacier
4529	cut.MaterialVariant = "2022 Stud"
4530	cut.Anchored = true; cut.Parent = workspace
4531	table.insert(angBoxes, cut)
4532	end
4533	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4534	if #cuts > 0 then
4535	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4536	for _, c in ipairs(cuts) do c:Destroy() end
4537	if ok and result then
4538	cyl:Destroy()
4539	result.Name = "Coil_5_2_B"; result.Anchored = true; result.Parent = model
4540	else
4541	cyl.Name = "Coil_5_2_B"; cyl.Parent = model
4542	end
4543	else
4544	cyl.Name = "Coil_5_2_B"; cyl.Parent = model
4545	end
4546	end
4547	do
4548	local rightV = Vector3.new(1,0,0).Unit
4549	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4550	local normalV = upV:Cross(rightV)
4551	local pos = Vector3.new(0, 1.68, 0.04)
4552	local cyl = Instance.new("Part")
4553	cyl.Shape = Enum.PartType.Cylinder
4554	cyl.Size = Vector3.new(0.8, 14.92, 14.92)
4555	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4556	cyl.BrickColor = BrickColor.new("Bright orange")
4557	cyl.Material = Enum.Material.Glacier
4558	cyl.MaterialVariant = "2022 Stud"
4559	cyl.Anchored = true; cyl.Parent = workspace
4560	local cuts = {}
4561	local hole = Instance.new("Part")
4562	hole.Shape = Enum.PartType.Cylinder
4563	hole.Size = Vector3.new(1, 13.32, 13.32)
4564	hole.CFrame = cyl.CFrame
4565	hole.BrickColor = BrickColor.new("Bright orange")
4566	hole.Material = Enum.Material.Glacier
4567	hole.MaterialVariant = "2022 Stud"
4568	hole.Anchored = true; hole.Parent = workspace
4569	table.insert(cuts, hole)
4570	local angBoxes = {}
4571	do
4572	local edgeDir = 1rightV + 0upV
4573	local edgePerp = 0rightV + 1upV
4574	local cut = Instance.new("Part")
4575	cut.Size = Vector3.new(29.84, 1, 29.84)
4576	cut.CFrame = CFrame.fromMatrix(pos + -1 * 14.92 * edgePerp, edgeDir, normalV)
4577	cut.BrickColor = BrickColor.new("Bright orange")
4578	cut.Material = Enum.Material.Glacier
4579	cut.MaterialVariant = "2022 Stud"
4580	cut.Anchored = true; cut.Parent = workspace
4581	table.insert(angBoxes, cut)
4582	end
4583	do
4584	local edgeDir = -1rightV + 0upV
4585	local edgePerp = 0rightV + -1upV
4586	local cut = Instance.new("Part")
4587	cut.Size = Vector3.new(29.84, 1, 29.84)
4588	cut.CFrame = CFrame.fromMatrix(pos + 1 * 14.92 * edgePerp, edgeDir, normalV)
4589	cut.BrickColor = BrickColor.new("Bright orange")
4590	cut.Material = Enum.Material.Glacier
4591	cut.MaterialVariant = "2022 Stud"
4592	cut.Anchored = true; cut.Parent = workspace
4593	table.insert(angBoxes, cut)
4594	end
4595	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4596	if #cuts > 0 then
4597	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4598	for _, c in ipairs(cuts) do c:Destroy() end
4599	if ok and result then
4600	cyl:Destroy()
4601	result.Name = "Coil_5_3_A"; result.Anchored = true; result.Parent = model
4602	else
4603	cyl.Name = "Coil_5_3_A"; cyl.Parent = model
4604	end
4605	else
4606	cyl.Name = "Coil_5_3_A"; cyl.Parent = model
4607	end
4608	end
4609	do
4610	local rightV = Vector3.new(1,0,0).Unit
4611	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4612	local normalV = upV:Cross(rightV)
4613	local pos = Vector3.new(0, 1.84, 0)
4614	local cyl = Instance.new("Part")
4615	cyl.Shape = Enum.PartType.Cylinder
4616	cyl.Size = Vector3.new(0.8, 14.92, 14.92)
4617	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4618	cyl.BrickColor = BrickColor.new("Bright orange")
4619	cyl.Material = Enum.Material.Glacier
4620	cyl.MaterialVariant = "2022 Stud"
4621	cyl.Anchored = true; cyl.Parent = workspace
4622	local cuts = {}
4623	local hole = Instance.new("Part")
4624	hole.Shape = Enum.PartType.Cylinder
4625	hole.Size = Vector3.new(1, 13.32, 13.32)
4626	hole.CFrame = cyl.CFrame
4627	hole.BrickColor = BrickColor.new("Bright orange")
4628	hole.Material = Enum.Material.Glacier
4629	hole.MaterialVariant = "2022 Stud"
4630	hole.Anchored = true; hole.Parent = workspace
4631	table.insert(cuts, hole)
4632	local angBoxes = {}
4633	do
4634	local edgeDir = -1rightV + 0upV
4635	local edgePerp = 0rightV + -1upV
4636	local cut = Instance.new("Part")
4637	cut.Size = Vector3.new(29.84, 1, 29.84)
4638	cut.CFrame = CFrame.fromMatrix(pos + -1 * 14.92 * edgePerp, edgeDir, normalV)
4639	cut.BrickColor = BrickColor.new("Bright orange")
4640	cut.Material = Enum.Material.Glacier
4641	cut.MaterialVariant = "2022 Stud"
4642	cut.Anchored = true; cut.Parent = workspace
4643	table.insert(angBoxes, cut)
4644	end
4645	do
4646	local edgeDir = 1rightV + 0upV
4647	local edgePerp = 0rightV + 1upV
4648	local cut = Instance.new("Part")
4649	cut.Size = Vector3.new(29.84, 1, 29.84)
4650	cut.CFrame = CFrame.fromMatrix(pos + 1 * 14.92 * edgePerp, edgeDir, normalV)
4651	cut.BrickColor = BrickColor.new("Bright orange")
4652	cut.Material = Enum.Material.Glacier
4653	cut.MaterialVariant = "2022 Stud"
4654	cut.Anchored = true; cut.Parent = workspace
4655	table.insert(angBoxes, cut)
4656	end
4657	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4658	if #cuts > 0 then
4659	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4660	for _, c in ipairs(cuts) do c:Destroy() end
4661	if ok and result then
4662	cyl:Destroy()
4663	result.Name = "Coil_5_3_B"; result.Anchored = true; result.Parent = model
4664	else
4665	cyl.Name = "Coil_5_3_B"; cyl.Parent = model
4666	end
4667	else
4668	cyl.Name = "Coil_5_3_B"; cyl.Parent = model
4669	end
4670	end
4671	do
4672	local rightV = Vector3.new(1,0,0).Unit
4673	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4674	local normalV = upV:Cross(rightV)
4675	local pos = Vector3.new(0, 1.8, 0.12)
4676	local cyl = Instance.new("Part")
4677	cyl.Shape = Enum.PartType.Cylinder
4678	cyl.Size = Vector3.new(0.8, 16.88, 16.88)
4679	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4680	cyl.BrickColor = BrickColor.new("Bright orange")
4681	cyl.Material = Enum.Material.Glacier
4682	cyl.MaterialVariant = "2022 Stud"
4683	cyl.Anchored = true; cyl.Parent = workspace
4684	local cuts = {}
4685	local hole = Instance.new("Part")
4686	hole.Shape = Enum.PartType.Cylinder
4687	hole.Size = Vector3.new(1, 15.28, 15.28)
4688	hole.CFrame = cyl.CFrame
4689	hole.BrickColor = BrickColor.new("Bright orange")
4690	hole.Material = Enum.Material.Glacier
4691	hole.MaterialVariant = "2022 Stud"
4692	hole.Anchored = true; hole.Parent = workspace
4693	table.insert(cuts, hole)
4694	local angBoxes = {}
4695	do
4696	local edgeDir = 1rightV + 0upV
4697	local edgePerp = 0rightV + 1upV
4698	local cut = Instance.new("Part")
4699	cut.Size = Vector3.new(33.76, 1, 33.76)
4700	cut.CFrame = CFrame.fromMatrix(pos + -1 * 16.88 * edgePerp, edgeDir, normalV)
4701	cut.BrickColor = BrickColor.new("Bright orange")
4702	cut.Material = Enum.Material.Glacier
4703	cut.MaterialVariant = "2022 Stud"
4704	cut.Anchored = true; cut.Parent = workspace
4705	table.insert(angBoxes, cut)
4706	end
4707	do
4708	local edgeDir = -1rightV + 0upV
4709	local edgePerp = 0rightV + -1upV
4710	local cut = Instance.new("Part")
4711	cut.Size = Vector3.new(33.76, 1, 33.76)
4712	cut.CFrame = CFrame.fromMatrix(pos + 1 * 16.88 * edgePerp, edgeDir, normalV)
4713	cut.BrickColor = BrickColor.new("Bright orange")
4714	cut.Material = Enum.Material.Glacier
4715	cut.MaterialVariant = "2022 Stud"
4716	cut.Anchored = true; cut.Parent = workspace
4717	table.insert(angBoxes, cut)
4718	end
4719	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4720	if #cuts > 0 then
4721	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4722	for _, c in ipairs(cuts) do c:Destroy() end
4723	if ok and result then
4724	cyl:Destroy()
4725	result.Name = "Coil_5_4_A"; result.Anchored = true; result.Parent = model
4726	else
4727	cyl.Name = "Coil_5_4_A"; cyl.Parent = model
4728	end
4729	else
4730	cyl.Name = "Coil_5_4_A"; cyl.Parent = model
4731	end
4732	end
4733	do
4734	local rightV = Vector3.new(1,0,0).Unit
4735	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4736	local normalV = upV:Cross(rightV)
4737	local pos = Vector3.new(0, 1.88, 0.08)
4738	local cyl = Instance.new("Part")
4739	cyl.Shape = Enum.PartType.Cylinder
4740	cyl.Size = Vector3.new(0.8, 16.88, 16.88)
4741	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4742	cyl.BrickColor = BrickColor.new("Bright orange")
4743	cyl.Material = Enum.Material.Glacier
4744	cyl.MaterialVariant = "2022 Stud"
4745	cyl.Anchored = true; cyl.Parent = workspace
4746	local cuts = {}
4747	local hole = Instance.new("Part")
4748	hole.Shape = Enum.PartType.Cylinder
4749	hole.Size = Vector3.new(1, 15.28, 15.28)
4750	hole.CFrame = cyl.CFrame
4751	hole.BrickColor = BrickColor.new("Bright orange")
4752	hole.Material = Enum.Material.Glacier
4753	hole.MaterialVariant = "2022 Stud"
4754	hole.Anchored = true; hole.Parent = workspace
4755	table.insert(cuts, hole)
4756	local angBoxes = {}
4757	do
4758	local edgeDir = -1rightV + 0upV
4759	local edgePerp = 0rightV + -1upV
4760	local cut = Instance.new("Part")
4761	cut.Size = Vector3.new(33.76, 1, 33.76)
4762	cut.CFrame = CFrame.fromMatrix(pos + -1 * 16.88 * edgePerp, edgeDir, normalV)
4763	cut.BrickColor = BrickColor.new("Bright orange")
4764	cut.Material = Enum.Material.Glacier
4765	cut.MaterialVariant = "2022 Stud"
4766	cut.Anchored = true; cut.Parent = workspace
4767	table.insert(angBoxes, cut)
4768	end
4769	do
4770	local edgeDir = 1rightV + 0upV
4771	local edgePerp = 0rightV + 1upV
4772	local cut = Instance.new("Part")
4773	cut.Size = Vector3.new(33.76, 1, 33.76)
4774	cut.CFrame = CFrame.fromMatrix(pos + 1 * 16.88 * edgePerp, edgeDir, normalV)
4775	cut.BrickColor = BrickColor.new("Bright orange")
4776	cut.Material = Enum.Material.Glacier
4777	cut.MaterialVariant = "2022 Stud"
4778	cut.Anchored = true; cut.Parent = workspace
4779	table.insert(angBoxes, cut)
4780	end
4781	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4782	if #cuts > 0 then
4783	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4784	for _, c in ipairs(cuts) do c:Destroy() end
4785	if ok and result then
4786	cyl:Destroy()
4787	result.Name = "Coil_5_4_B"; result.Anchored = true; result.Parent = model
4788	else
4789	cyl.Name = "Coil_5_4_B"; cyl.Parent = model
4790	end
4791	else
4792	cyl.Name = "Coil_5_4_B"; cyl.Parent = model
4793	end
4794	end
4795	do
4796	local rightV = Vector3.new(1,0,0).Unit
4797	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4798	local normalV = upV:Cross(rightV)
4799	local pos = Vector3.new(0, 1.76, 0.04)
4800	local cyl = Instance.new("Part")
4801	cyl.Shape = Enum.PartType.Cylinder
4802	cyl.Size = Vector3.new(0.8, 18.44, 18.44)
4803	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4804	cyl.BrickColor = BrickColor.new("Bright orange")
4805	cyl.Material = Enum.Material.Glacier
4806	cyl.MaterialVariant = "2022 Stud"
4807	cyl.Anchored = true; cyl.Parent = workspace
4808	local cuts = {}
4809	local hole = Instance.new("Part")
4810	hole.Shape = Enum.PartType.Cylinder
4811	hole.Size = Vector3.new(1, 16.84, 16.84)
4812	hole.CFrame = cyl.CFrame
4813	hole.BrickColor = BrickColor.new("Bright orange")
4814	hole.Material = Enum.Material.Glacier
4815	hole.MaterialVariant = "2022 Stud"
4816	hole.Anchored = true; hole.Parent = workspace
4817	table.insert(cuts, hole)
4818	local angBoxes = {}
4819	do
4820	local edgeDir = 1rightV + 0upV
4821	local edgePerp = 0rightV + 1upV
4822	local cut = Instance.new("Part")
4823	cut.Size = Vector3.new(36.88, 1, 36.88)
4824	cut.CFrame = CFrame.fromMatrix(pos + -1 * 18.44 * edgePerp, edgeDir, normalV)
4825	cut.BrickColor = BrickColor.new("Bright orange")
4826	cut.Material = Enum.Material.Glacier
4827	cut.MaterialVariant = "2022 Stud"
4828	cut.Anchored = true; cut.Parent = workspace
4829	table.insert(angBoxes, cut)
4830	end
4831	do
4832	local edgeDir = -1rightV + 0upV
4833	local edgePerp = 0rightV + -1upV
4834	local cut = Instance.new("Part")
4835	cut.Size = Vector3.new(36.88, 1, 36.88)
4836	cut.CFrame = CFrame.fromMatrix(pos + 1 * 18.44 * edgePerp, edgeDir, normalV)
4837	cut.BrickColor = BrickColor.new("Bright orange")
4838	cut.Material = Enum.Material.Glacier
4839	cut.MaterialVariant = "2022 Stud"
4840	cut.Anchored = true; cut.Parent = workspace
4841	table.insert(angBoxes, cut)
4842	end
4843	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4844	if #cuts > 0 then
4845	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4846	for _, c in ipairs(cuts) do c:Destroy() end
4847	if ok and result then
4848	cyl:Destroy()
4849	result.Name = "Coil_5_5_A"; result.Anchored = true; result.Parent = model
4850	else
4851	cyl.Name = "Coil_5_5_A"; cyl.Parent = model
4852	end
4853	else
4854	cyl.Name = "Coil_5_5_A"; cyl.Parent = model
4855	end
4856	end
4857	do
4858	local rightV = Vector3.new(1,0,0).Unit
4859	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4860	local normalV = upV:Cross(rightV)
4861	local pos = Vector3.new(0, 1.72, 0)
4862	local cyl = Instance.new("Part")
4863	cyl.Shape = Enum.PartType.Cylinder
4864	cyl.Size = Vector3.new(0.8, 18.44, 18.44)
4865	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4866	cyl.BrickColor = BrickColor.new("Bright orange")
4867	cyl.Material = Enum.Material.Glacier
4868	cyl.MaterialVariant = "2022 Stud"
4869	cyl.Anchored = true; cyl.Parent = workspace
4870	local cuts = {}
4871	local hole = Instance.new("Part")
4872	hole.Shape = Enum.PartType.Cylinder
4873	hole.Size = Vector3.new(1, 16.84, 16.84)
4874	hole.CFrame = cyl.CFrame
4875	hole.BrickColor = BrickColor.new("Bright orange")
4876	hole.Material = Enum.Material.Glacier
4877	hole.MaterialVariant = "2022 Stud"
4878	hole.Anchored = true; hole.Parent = workspace
4879	table.insert(cuts, hole)
4880	local angBoxes = {}
4881	do
4882	local edgeDir = -1rightV + 0upV
4883	local edgePerp = 0rightV + -1upV
4884	local cut = Instance.new("Part")
4885	cut.Size = Vector3.new(36.88, 1, 36.88)
4886	cut.CFrame = CFrame.fromMatrix(pos + -1 * 18.44 * edgePerp, edgeDir, normalV)
4887	cut.BrickColor = BrickColor.new("Bright orange")
4888	cut.Material = Enum.Material.Glacier
4889	cut.MaterialVariant = "2022 Stud"
4890	cut.Anchored = true; cut.Parent = workspace
4891	table.insert(angBoxes, cut)
4892	end
4893	do
4894	local edgeDir = 1rightV + 0upV
4895	local edgePerp = 0rightV + 1upV
4896	local cut = Instance.new("Part")
4897	cut.Size = Vector3.new(36.88, 1, 36.88)
4898	cut.CFrame = CFrame.fromMatrix(pos + 1 * 18.44 * edgePerp, edgeDir, normalV)
4899	cut.BrickColor = BrickColor.new("Bright orange")
4900	cut.Material = Enum.Material.Glacier
4901	cut.MaterialVariant = "2022 Stud"
4902	cut.Anchored = true; cut.Parent = workspace
4903	table.insert(angBoxes, cut)
4904	end
4905	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4906	if #cuts > 0 then
4907	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4908	for _, c in ipairs(cuts) do c:Destroy() end
4909	if ok and result then
4910	cyl:Destroy()
4911	result.Name = "Coil_5_5_B"; result.Anchored = true; result.Parent = model
4912	else
4913	cyl.Name = "Coil_5_5_B"; cyl.Parent = model
4914	end
4915	else
4916	cyl.Name = "Coil_5_5_B"; cyl.Parent = model
4917	end
4918	end
4919	do
4920	local rightV = Vector3.new(1,0,0).Unit
4921	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4922	local normalV = upV:Cross(rightV)
4923	local pos = Vector3.new(0, 3.02, 0.12)
4924	local cyl = Instance.new("Part")
4925	cyl.Shape = Enum.PartType.Cylinder
4926	cyl.Size = Vector3.new(0.8, 9.68, 9.68)
4927	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4928	cyl.BrickColor = BrickColor.new("Bright orange")
4929	cyl.Material = Enum.Material.Glacier
4930	cyl.MaterialVariant = "2022 Stud"
4931	cyl.Anchored = true; cyl.Parent = workspace
4932	local cuts = {}
4933	local hole = Instance.new("Part")
4934	hole.Shape = Enum.PartType.Cylinder
4935	hole.Size = Vector3.new(1, 8.08, 8.08)
4936	hole.CFrame = cyl.CFrame
4937	hole.BrickColor = BrickColor.new("Bright orange")
4938	hole.Material = Enum.Material.Glacier
4939	hole.MaterialVariant = "2022 Stud"
4940	hole.Anchored = true; hole.Parent = workspace
4941	table.insert(cuts, hole)
4942	local angBoxes = {}
4943	do
4944	local edgeDir = 1rightV + 0upV
4945	local edgePerp = 0rightV + 1upV
4946	local cut = Instance.new("Part")
4947	cut.Size = Vector3.new(19.36, 1, 19.36)
4948	cut.CFrame = CFrame.fromMatrix(pos + -1 * 9.68 * edgePerp, edgeDir, normalV)
4949	cut.BrickColor = BrickColor.new("Bright orange")
4950	cut.Material = Enum.Material.Glacier
4951	cut.MaterialVariant = "2022 Stud"
4952	cut.Anchored = true; cut.Parent = workspace
4953	table.insert(angBoxes, cut)
4954	end
4955	do
4956	local edgeDir = -1rightV + 0upV
4957	local edgePerp = 0rightV + -1upV
4958	local cut = Instance.new("Part")
4959	cut.Size = Vector3.new(19.36, 1, 19.36)
4960	cut.CFrame = CFrame.fromMatrix(pos + 1 * 9.68 * edgePerp, edgeDir, normalV)
4961	cut.BrickColor = BrickColor.new("Bright orange")
4962	cut.Material = Enum.Material.Glacier
4963	cut.MaterialVariant = "2022 Stud"
4964	cut.Anchored = true; cut.Parent = workspace
4965	table.insert(angBoxes, cut)
4966	end
4967	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
4968	if #cuts > 0 then
4969	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
4970	for _, c in ipairs(cuts) do c:Destroy() end
4971	if ok and result then
4972	cyl:Destroy()
4973	result.Name = "Coil_6_0_A"; result.Anchored = true; result.Parent = model
4974	else
4975	cyl.Name = "Coil_6_0_A"; cyl.Parent = model
4976	end
4977	else
4978	cyl.Name = "Coil_6_0_A"; cyl.Parent = model
4979	end
4980	end
4981	do
4982	local rightV = Vector3.new(1,0,0).Unit
4983	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
4984	local normalV = upV:Cross(rightV)
4985	local pos = Vector3.new(0, 2.66, 0.08)
4986	local cyl = Instance.new("Part")
4987	cyl.Shape = Enum.PartType.Cylinder
4988	cyl.Size = Vector3.new(0.8, 9.68, 9.68)
4989	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
4990	cyl.BrickColor = BrickColor.new("Bright orange")
4991	cyl.Material = Enum.Material.Glacier
4992	cyl.MaterialVariant = "2022 Stud"
4993	cyl.Anchored = true; cyl.Parent = workspace
4994	local cuts = {}
4995	local hole = Instance.new("Part")
4996	hole.Shape = Enum.PartType.Cylinder
4997	hole.Size = Vector3.new(1, 8.08, 8.08)
4998	hole.CFrame = cyl.CFrame
4999	hole.BrickColor = BrickColor.new("Bright orange")
5000	hole.Material = Enum.Material.Glacier
5001	hole.MaterialVariant = "2022 Stud"
5002	hole.Anchored = true; hole.Parent = workspace
5003	table.insert(cuts, hole)
5004	local angBoxes = {}
5005	do
5006	local edgeDir = -1rightV + 0upV
5007	local edgePerp = 0rightV + -1upV
5008	local cut = Instance.new("Part")
5009	cut.Size = Vector3.new(19.36, 1, 19.36)
5010	cut.CFrame = CFrame.fromMatrix(pos + -1 * 9.68 * edgePerp, edgeDir, normalV)
5011	cut.BrickColor = BrickColor.new("Bright orange")
5012	cut.Material = Enum.Material.Glacier
5013	cut.MaterialVariant = "2022 Stud"
5014	cut.Anchored = true; cut.Parent = workspace
5015	table.insert(angBoxes, cut)
5016	end
5017	do
5018	local edgeDir = 1rightV + 0upV
5019	local edgePerp = 0rightV + 1upV
5020	local cut = Instance.new("Part")
5021	cut.Size = Vector3.new(19.36, 1, 19.36)
5022	cut.CFrame = CFrame.fromMatrix(pos + 1 * 9.68 * edgePerp, edgeDir, normalV)
5023	cut.BrickColor = BrickColor.new("Bright orange")
5024	cut.Material = Enum.Material.Glacier
5025	cut.MaterialVariant = "2022 Stud"
5026	cut.Anchored = true; cut.Parent = workspace
5027	table.insert(angBoxes, cut)
5028	end
5029	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
5030	if #cuts > 0 then
5031	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
5032	for _, c in ipairs(cuts) do c:Destroy() end
5033	if ok and result then
5034	cyl:Destroy()
5035	result.Name = "Coil_6_0_B"; result.Anchored = true; result.Parent = model
5036	else
5037	cyl.Name = "Coil_6_0_B"; cyl.Parent = model
5038	end
5039	else
5040	cyl.Name = "Coil_6_0_B"; cyl.Parent = model
5041	end
5042	end
5043	do
5044	local rightV = Vector3.new(1,0,0).Unit
5045	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
5046	local normalV = upV:Cross(rightV)
5047	local pos = Vector3.new(0, 2.98, 0.04)
5048	local cyl = Instance.new("Part")
5049	cyl.Shape = Enum.PartType.Cylinder
5050	cyl.Size = Vector3.new(0.8, 11.24, 11.24)
5051	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
5052	cyl.BrickColor = BrickColor.new("Bright orange")
5053	cyl.Material = Enum.Material.Glacier
5054	cyl.MaterialVariant = "2022 Stud"
5055	cyl.Anchored = true; cyl.Parent = workspace
5056	local cuts = {}
5057	local hole = Instance.new("Part")
5058	hole.Shape = Enum.PartType.Cylinder
5059	hole.Size = Vector3.new(1, 9.64, 9.64)
5060	hole.CFrame = cyl.CFrame
5061	hole.BrickColor = BrickColor.new("Bright orange")
5062	hole.Material = Enum.Material.Glacier
5063	hole.MaterialVariant = "2022 Stud"
5064	hole.Anchored = true; hole.Parent = workspace
5065	table.insert(cuts, hole)
5066	local angBoxes = {}
5067	do
5068	local edgeDir = 1rightV + 0upV
5069	local edgePerp = 0rightV + 1upV
5070	local cut = Instance.new("Part")
5071	cut.Size = Vector3.new(22.48, 1, 22.48)
5072	cut.CFrame = CFrame.fromMatrix(pos + -1 * 11.24 * edgePerp, edgeDir, normalV)
5073	cut.BrickColor = BrickColor.new("Bright orange")
5074	cut.Material = Enum.Material.Glacier
5075	cut.MaterialVariant = "2022 Stud"
5076	cut.Anchored = true; cut.Parent = workspace
5077	table.insert(angBoxes, cut)
5078	end
5079	do
5080	local edgeDir = -1rightV + 0upV
5081	local edgePerp = 0rightV + -1upV
5082	local cut = Instance.new("Part")
5083	cut.Size = Vector3.new(22.48, 1, 22.48)
5084	cut.CFrame = CFrame.fromMatrix(pos + 1 * 11.24 * edgePerp, edgeDir, normalV)
5085	cut.BrickColor = BrickColor.new("Bright orange")
5086	cut.Material = Enum.Material.Glacier
5087	cut.MaterialVariant = "2022 Stud"
5088	cut.Anchored = true; cut.Parent = workspace
5089	table.insert(angBoxes, cut)
5090	end
5091	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
5092	if #cuts > 0 then
5093	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
5094	for _, c in ipairs(cuts) do c:Destroy() end
5095	if ok and result then
5096	cyl:Destroy()
5097	result.Name = "Coil_6_1_A"; result.Anchored = true; result.Parent = model
5098	else
5099	cyl.Name = "Coil_6_1_A"; cyl.Parent = model
5100	end
5101	else
5102	cyl.Name = "Coil_6_1_A"; cyl.Parent = model
5103	end
5104	end
5105	do
5106	local rightV = Vector3.new(1,0,0).Unit
5107	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
5108	local normalV = upV:Cross(rightV)
5109	local pos = Vector3.new(0, 2.94, 0)
5110	local cyl = Instance.new("Part")
5111	cyl.Shape = Enum.PartType.Cylinder
5112	cyl.Size = Vector3.new(0.8, 11.24, 11.24)
5113	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
5114	cyl.BrickColor = BrickColor.new("Bright orange")
5115	cyl.Material = Enum.Material.Glacier
5116	cyl.MaterialVariant = "2022 Stud"
5117	cyl.Anchored = true; cyl.Parent = workspace
5118	local cuts = {}
5119	local hole = Instance.new("Part")
5120	hole.Shape = Enum.PartType.Cylinder
5121	hole.Size = Vector3.new(1, 9.64, 9.64)
5122	hole.CFrame = cyl.CFrame
5123	hole.BrickColor = BrickColor.new("Bright orange")
5124	hole.Material = Enum.Material.Glacier
5125	hole.MaterialVariant = "2022 Stud"
5126	hole.Anchored = true; hole.Parent = workspace
5127	table.insert(cuts, hole)
5128	local angBoxes = {}
5129	do
5130	local edgeDir = -1rightV + 0upV
5131	local edgePerp = 0rightV + -1upV
5132	local cut = Instance.new("Part")
5133	cut.Size = Vector3.new(22.48, 1, 22.48)
5134	cut.CFrame = CFrame.fromMatrix(pos + -1 * 11.24 * edgePerp, edgeDir, normalV)
5135	cut.BrickColor = BrickColor.new("Bright orange")
5136	cut.Material = Enum.Material.Glacier
5137	cut.MaterialVariant = "2022 Stud"
5138	cut.Anchored = true; cut.Parent = workspace
5139	table.insert(angBoxes, cut)
5140	end
5141	do
5142	local edgeDir = 1rightV + 0upV
5143	local edgePerp = 0rightV + 1upV
5144	local cut = Instance.new("Part")
5145	cut.Size = Vector3.new(22.48, 1, 22.48)
5146	cut.CFrame = CFrame.fromMatrix(pos + 1 * 11.24 * edgePerp, edgeDir, normalV)
5147	cut.BrickColor = BrickColor.new("Bright orange")
5148	cut.Material = Enum.Material.Glacier
5149	cut.MaterialVariant = "2022 Stud"
5150	cut.Anchored = true; cut.Parent = workspace
5151	table.insert(angBoxes, cut)
5152	end
5153	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
5154	if #cuts > 0 then
5155	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
5156	for _, c in ipairs(cuts) do c:Destroy() end
5157	if ok and result then
5158	cyl:Destroy()
5159	result.Name = "Coil_6_1_B"; result.Anchored = true; result.Parent = model
5160	else
5161	cyl.Name = "Coil_6_1_B"; cyl.Parent = model
5162	end
5163	else
5164	cyl.Name = "Coil_6_1_B"; cyl.Parent = model
5165	end
5166	end
5167	do
5168	local rightV = Vector3.new(1,0,0).Unit
5169	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
5170	local normalV = upV:Cross(rightV)
5171	local pos = Vector3.new(0, 2.9, 0.04)
5172	local cyl = Instance.new("Part")
5173	cyl.Shape = Enum.PartType.Cylinder
5174	cyl.Size = Vector3.new(0.8, 13.2, 13.2)
5175	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
5176	cyl.BrickColor = BrickColor.new("Bright orange")
5177	cyl.Material = Enum.Material.Glacier
5178	cyl.MaterialVariant = "2022 Stud"
5179	cyl.Anchored = true; cyl.Parent = workspace
5180	local cuts = {}
5181	local hole = Instance.new("Part")
5182	hole.Shape = Enum.PartType.Cylinder
5183	hole.Size = Vector3.new(1, 11.6, 11.6)
5184	hole.CFrame = cyl.CFrame
5185	hole.BrickColor = BrickColor.new("Bright orange")
5186	hole.Material = Enum.Material.Glacier
5187	hole.MaterialVariant = "2022 Stud"
5188	hole.Anchored = true; hole.Parent = workspace
5189	table.insert(cuts, hole)
5190	local angBoxes = {}
5191	do
5192	local edgeDir = 1rightV + 0upV
5193	local edgePerp = 0rightV + 1upV
5194	local cut = Instance.new("Part")
5195	cut.Size = Vector3.new(26.4, 1, 26.4)
5196	cut.CFrame = CFrame.fromMatrix(pos + -1 * 13.2 * edgePerp, edgeDir, normalV)
5197	cut.BrickColor = BrickColor.new("Bright orange")
5198	cut.Material = Enum.Material.Glacier
5199	cut.MaterialVariant = "2022 Stud"
5200	cut.Anchored = true; cut.Parent = workspace
5201	table.insert(angBoxes, cut)
5202	end
5203	do
5204	local edgeDir = -1rightV + 0upV
5205	local edgePerp = 0rightV + -1upV
5206	local cut = Instance.new("Part")
5207	cut.Size = Vector3.new(26.4, 1, 26.4)
5208	cut.CFrame = CFrame.fromMatrix(pos + 1 * 13.2 * edgePerp, edgeDir, normalV)
5209	cut.BrickColor = BrickColor.new("Bright orange")
5210	cut.Material = Enum.Material.Glacier
5211	cut.MaterialVariant = "2022 Stud"
5212	cut.Anchored = true; cut.Parent = workspace
5213	table.insert(angBoxes, cut)
5214	end
5215	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
5216	if #cuts > 0 then
5217	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
5218	for _, c in ipairs(cuts) do c:Destroy() end
5219	if ok and result then
5220	cyl:Destroy()
5221	result.Name = "Coil_6_2_A"; result.Anchored = true; result.Parent = model
5222	else
5223	cyl.Name = "Coil_6_2_A"; cyl.Parent = model
5224	end
5225	else
5226	cyl.Name = "Coil_6_2_A"; cyl.Parent = model
5227	end
5228	end
5229	do
5230	local rightV = Vector3.new(1,0,0).Unit
5231	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
5232	local normalV = upV:Cross(rightV)
5233	local pos = Vector3.new(0, 2.7, 0)
5234	local cyl = Instance.new("Part")
5235	cyl.Shape = Enum.PartType.Cylinder
5236	cyl.Size = Vector3.new(0.8, 13.2, 13.2)
5237	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
5238	cyl.BrickColor = BrickColor.new("Bright orange")
5239	cyl.Material = Enum.Material.Glacier
5240	cyl.MaterialVariant = "2022 Stud"
5241	cyl.Anchored = true; cyl.Parent = workspace
5242	local cuts = {}
5243	local hole = Instance.new("Part")
5244	hole.Shape = Enum.PartType.Cylinder
5245	hole.Size = Vector3.new(1, 11.6, 11.6)
5246	hole.CFrame = cyl.CFrame
5247	hole.BrickColor = BrickColor.new("Bright orange")
5248	hole.Material = Enum.Material.Glacier
5249	hole.MaterialVariant = "2022 Stud"
5250	hole.Anchored = true; hole.Parent = workspace
5251	table.insert(cuts, hole)
5252	local angBoxes = {}
5253	do
5254	local edgeDir = -1rightV + 0upV
5255	local edgePerp = 0rightV + -1upV
5256	local cut = Instance.new("Part")
5257	cut.Size = Vector3.new(26.4, 1, 26.4)
5258	cut.CFrame = CFrame.fromMatrix(pos + -1 * 13.2 * edgePerp, edgeDir, normalV)
5259	cut.BrickColor = BrickColor.new("Bright orange")
5260	cut.Material = Enum.Material.Glacier
5261	cut.MaterialVariant = "2022 Stud"
5262	cut.Anchored = true; cut.Parent = workspace
5263	table.insert(angBoxes, cut)
5264	end
5265	do
5266	local edgeDir = 1rightV + 0upV
5267	local edgePerp = 0rightV + 1upV
5268	local cut = Instance.new("Part")
5269	cut.Size = Vector3.new(26.4, 1, 26.4)
5270	cut.CFrame = CFrame.fromMatrix(pos + 1 * 13.2 * edgePerp, edgeDir, normalV)
5271	cut.BrickColor = BrickColor.new("Bright orange")
5272	cut.Material = Enum.Material.Glacier
5273	cut.MaterialVariant = "2022 Stud"
5274	cut.Anchored = true; cut.Parent = workspace
5275	table.insert(angBoxes, cut)
5276	end
5277	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
5278	if #cuts > 0 then
5279	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
5280	for _, c in ipairs(cuts) do c:Destroy() end
5281	if ok and result then
5282	cyl:Destroy()
5283	result.Name = "Coil_6_2_B"; result.Anchored = true; result.Parent = model
5284	else
5285	cyl.Name = "Coil_6_2_B"; cyl.Parent = model
5286	end
5287	else
5288	cyl.Name = "Coil_6_2_B"; cyl.Parent = model
5289	end
5290	end
5291	do
5292	local rightV = Vector3.new(1,0,0).Unit
5293	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
5294	local normalV = upV:Cross(rightV)
5295	local pos = Vector3.new(0, 2.86, 0.12)
5296	local cyl = Instance.new("Part")
5297	cyl.Shape = Enum.PartType.Cylinder
5298	cyl.Size = Vector3.new(0.8, 15.16, 15.16)
5299	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
5300	cyl.BrickColor = BrickColor.new("Bright orange")
5301	cyl.Material = Enum.Material.Glacier
5302	cyl.MaterialVariant = "2022 Stud"
5303	cyl.Anchored = true; cyl.Parent = workspace
5304	local cuts = {}
5305	local hole = Instance.new("Part")
5306	hole.Shape = Enum.PartType.Cylinder
5307	hole.Size = Vector3.new(1, 13.56, 13.56)
5308	hole.CFrame = cyl.CFrame
5309	hole.BrickColor = BrickColor.new("Bright orange")
5310	hole.Material = Enum.Material.Glacier
5311	hole.MaterialVariant = "2022 Stud"
5312	hole.Anchored = true; hole.Parent = workspace
5313	table.insert(cuts, hole)
5314	local angBoxes = {}
5315	do
5316	local edgeDir = 1rightV + 0upV
5317	local edgePerp = 0rightV + 1upV
5318	local cut = Instance.new("Part")
5319	cut.Size = Vector3.new(30.32, 1, 30.32)
5320	cut.CFrame = CFrame.fromMatrix(pos + -1 * 15.16 * edgePerp, edgeDir, normalV)
5321	cut.BrickColor = BrickColor.new("Bright orange")
5322	cut.Material = Enum.Material.Glacier
5323	cut.MaterialVariant = "2022 Stud"
5324	cut.Anchored = true; cut.Parent = workspace
5325	table.insert(angBoxes, cut)
5326	end
5327	do
5328	local edgeDir = -1rightV + 0upV
5329	local edgePerp = 0rightV + -1upV
5330	local cut = Instance.new("Part")
5331	cut.Size = Vector3.new(30.32, 1, 30.32)
5332	cut.CFrame = CFrame.fromMatrix(pos + 1 * 15.16 * edgePerp, edgeDir, normalV)
5333	cut.BrickColor = BrickColor.new("Bright orange")
5334	cut.Material = Enum.Material.Glacier
5335	cut.MaterialVariant = "2022 Stud"
5336	cut.Anchored = true; cut.Parent = workspace
5337	table.insert(angBoxes, cut)
5338	end
5339	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
5340	if #cuts > 0 then
5341	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
5342	for _, c in ipairs(cuts) do c:Destroy() end
5343	if ok and result then
5344	cyl:Destroy()
5345	result.Name = "Coil_6_3_A"; result.Anchored = true; result.Parent = model
5346	else
5347	cyl.Name = "Coil_6_3_A"; cyl.Parent = model
5348	end
5349	else
5350	cyl.Name = "Coil_6_3_A"; cyl.Parent = model
5351	end
5352	end
5353	do
5354	local rightV = Vector3.new(1,0,0).Unit
5355	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
5356	local normalV = upV:Cross(rightV)
5357	local pos = Vector3.new(0, 2.74, 0.08)
5358	local cyl = Instance.new("Part")
5359	cyl.Shape = Enum.PartType.Cylinder
5360	cyl.Size = Vector3.new(0.8, 15.16, 15.16)
5361	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
5362	cyl.BrickColor = BrickColor.new("Bright orange")
5363	cyl.Material = Enum.Material.Glacier
5364	cyl.MaterialVariant = "2022 Stud"
5365	cyl.Anchored = true; cyl.Parent = workspace
5366	local cuts = {}
5367	local hole = Instance.new("Part")
5368	hole.Shape = Enum.PartType.Cylinder
5369	hole.Size = Vector3.new(1, 13.56, 13.56)
5370	hole.CFrame = cyl.CFrame
5371	hole.BrickColor = BrickColor.new("Bright orange")
5372	hole.Material = Enum.Material.Glacier
5373	hole.MaterialVariant = "2022 Stud"
5374	hole.Anchored = true; hole.Parent = workspace
5375	table.insert(cuts, hole)
5376	local angBoxes = {}
5377	do
5378	local edgeDir = -1rightV + 0upV
5379	local edgePerp = 0rightV + -1upV
5380	local cut = Instance.new("Part")
5381	cut.Size = Vector3.new(30.32, 1, 30.32)
5382	cut.CFrame = CFrame.fromMatrix(pos + -1 * 15.16 * edgePerp, edgeDir, normalV)
5383	cut.BrickColor = BrickColor.new("Bright orange")
5384	cut.Material = Enum.Material.Glacier
5385	cut.MaterialVariant = "2022 Stud"
5386	cut.Anchored = true; cut.Parent = workspace
5387	table.insert(angBoxes, cut)
5388	end
5389	do
5390	local edgeDir = 1rightV + 0upV
5391	local edgePerp = 0rightV + 1upV
5392	local cut = Instance.new("Part")
5393	cut.Size = Vector3.new(30.32, 1, 30.32)
5394	cut.CFrame = CFrame.fromMatrix(pos + 1 * 15.16 * edgePerp, edgeDir, normalV)
5395	cut.BrickColor = BrickColor.new("Bright orange")
5396	cut.Material = Enum.Material.Glacier
5397	cut.MaterialVariant = "2022 Stud"
5398	cut.Anchored = true; cut.Parent = workspace
5399	table.insert(angBoxes, cut)
5400	end
5401	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
5402	if #cuts > 0 then
5403	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
5404	for _, c in ipairs(cuts) do c:Destroy() end
5405	if ok and result then
5406	cyl:Destroy()
5407	result.Name = "Coil_6_3_B"; result.Anchored = true; result.Parent = model
5408	else
5409	cyl.Name = "Coil_6_3_B"; cyl.Parent = model
5410	end
5411	else
5412	cyl.Name = "Coil_6_3_B"; cyl.Parent = model
5413	end
5414	end
5415	do
5416	local rightV = Vector3.new(1,0,0).Unit
5417	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
5418	local normalV = upV:Cross(rightV)
5419	local pos = Vector3.new(0, 2.82, 0.04)
5420	local cyl = Instance.new("Part")
5421	cyl.Shape = Enum.PartType.Cylinder
5422	cyl.Size = Vector3.new(0.8, 16.72, 16.72)
5423	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
5424	cyl.BrickColor = BrickColor.new("Bright orange")
5425	cyl.Material = Enum.Material.Glacier
5426	cyl.MaterialVariant = "2022 Stud"
5427	cyl.Anchored = true; cyl.Parent = workspace
5428	local cuts = {}
5429	local hole = Instance.new("Part")
5430	hole.Shape = Enum.PartType.Cylinder
5431	hole.Size = Vector3.new(1, 15.12, 15.12)
5432	hole.CFrame = cyl.CFrame
5433	hole.BrickColor = BrickColor.new("Bright orange")
5434	hole.Material = Enum.Material.Glacier
5435	hole.MaterialVariant = "2022 Stud"
5436	hole.Anchored = true; hole.Parent = workspace
5437	table.insert(cuts, hole)
5438	local angBoxes = {}
5439	do
5440	local edgeDir = 1rightV + 0upV
5441	local edgePerp = 0rightV + 1upV
5442	local cut = Instance.new("Part")
5443	cut.Size = Vector3.new(33.44, 1, 33.44)
5444	cut.CFrame = CFrame.fromMatrix(pos + -1 * 16.72 * edgePerp, edgeDir, normalV)
5445	cut.BrickColor = BrickColor.new("Bright orange")
5446	cut.Material = Enum.Material.Glacier
5447	cut.MaterialVariant = "2022 Stud"
5448	cut.Anchored = true; cut.Parent = workspace
5449	table.insert(angBoxes, cut)
5450	end
5451	do
5452	local edgeDir = -1rightV + 0upV
5453	local edgePerp = 0rightV + -1upV
5454	local cut = Instance.new("Part")
5455	cut.Size = Vector3.new(33.44, 1, 33.44)
5456	cut.CFrame = CFrame.fromMatrix(pos + 1 * 16.72 * edgePerp, edgeDir, normalV)
5457	cut.BrickColor = BrickColor.new("Bright orange")
5458	cut.Material = Enum.Material.Glacier
5459	cut.MaterialVariant = "2022 Stud"
5460	cut.Anchored = true; cut.Parent = workspace
5461	table.insert(angBoxes, cut)
5462	end
5463	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
5464	if #cuts > 0 then
5465	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
5466	for _, c in ipairs(cuts) do c:Destroy() end
5467	if ok and result then
5468	cyl:Destroy()
5469	result.Name = "Coil_6_4_A"; result.Anchored = true; result.Parent = model
5470	else
5471	cyl.Name = "Coil_6_4_A"; cyl.Parent = model
5472	end
5473	else
5474	cyl.Name = "Coil_6_4_A"; cyl.Parent = model
5475	end
5476	end
5477	do
5478	local rightV = Vector3.new(1,0,0).Unit
5479	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
5480	local normalV = upV:Cross(rightV)
5481	local pos = Vector3.new(0, 2.78, 0)
5482	local cyl = Instance.new("Part")
5483	cyl.Shape = Enum.PartType.Cylinder
5484	cyl.Size = Vector3.new(0.8, 16.72, 16.72)
5485	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
5486	cyl.BrickColor = BrickColor.new("Bright orange")
5487	cyl.Material = Enum.Material.Glacier
5488	cyl.MaterialVariant = "2022 Stud"
5489	cyl.Anchored = true; cyl.Parent = workspace
5490	local cuts = {}
5491	local hole = Instance.new("Part")
5492	hole.Shape = Enum.PartType.Cylinder
5493	hole.Size = Vector3.new(1, 15.12, 15.12)
5494	hole.CFrame = cyl.CFrame
5495	hole.BrickColor = BrickColor.new("Bright orange")
5496	hole.Material = Enum.Material.Glacier
5497	hole.MaterialVariant = "2022 Stud"
5498	hole.Anchored = true; hole.Parent = workspace
5499	table.insert(cuts, hole)
5500	local angBoxes = {}
5501	do
5502	local edgeDir = -1rightV + 0upV
5503	local edgePerp = 0rightV + -1upV
5504	local cut = Instance.new("Part")
5505	cut.Size = Vector3.new(33.44, 1, 33.44)
5506	cut.CFrame = CFrame.fromMatrix(pos + -1 * 16.72 * edgePerp, edgeDir, normalV)
5507	cut.BrickColor = BrickColor.new("Bright orange")
5508	cut.Material = Enum.Material.Glacier
5509	cut.MaterialVariant = "2022 Stud"
5510	cut.Anchored = true; cut.Parent = workspace
5511	table.insert(angBoxes, cut)
5512	end
5513	do
5514	local edgeDir = 1rightV + 0upV
5515	local edgePerp = 0rightV + 1upV
5516	local cut = Instance.new("Part")
5517	cut.Size = Vector3.new(33.44, 1, 33.44)
5518	cut.CFrame = CFrame.fromMatrix(pos + 1 * 16.72 * edgePerp, edgeDir, normalV)
5519	cut.BrickColor = BrickColor.new("Bright orange")
5520	cut.Material = Enum.Material.Glacier
5521	cut.MaterialVariant = "2022 Stud"
5522	cut.Anchored = true; cut.Parent = workspace
5523	table.insert(angBoxes, cut)
5524	end
5525	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
5526	if #cuts > 0 then
5527	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
5528	for _, c in ipairs(cuts) do c:Destroy() end
5529	if ok and result then
5530	cyl:Destroy()
5531	result.Name = "Coil_6_4_B"; result.Anchored = true; result.Parent = model
5532	else
5533	cyl.Name = "Coil_6_4_B"; cyl.Parent = model
5534	end
5535	else
5536	cyl.Name = "Coil_6_4_B"; cyl.Parent = model
5537	end
5538	end
5539	do
5540	local rightV = Vector3.new(1,0,0).Unit
5541	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
5542	local normalV = upV:Cross(rightV)
5543	local pos = Vector3.new(0, 2.66, 0.04)
5544	local cyl = Instance.new("Part")
5545	cyl.Shape = Enum.PartType.Cylinder
5546	cyl.Size = Vector3.new(0.8, 18.68, 18.68)
5547	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
5548	cyl.BrickColor = BrickColor.new("Bright orange")
5549	cyl.Material = Enum.Material.Glacier
5550	cyl.MaterialVariant = "2022 Stud"
5551	cyl.Anchored = true; cyl.Parent = workspace
5552	local cuts = {}
5553	local hole = Instance.new("Part")
5554	hole.Shape = Enum.PartType.Cylinder
5555	hole.Size = Vector3.new(1, 17.08, 17.08)
5556	hole.CFrame = cyl.CFrame
5557	hole.BrickColor = BrickColor.new("Bright orange")
5558	hole.Material = Enum.Material.Glacier
5559	hole.MaterialVariant = "2022 Stud"
5560	hole.Anchored = true; hole.Parent = workspace
5561	table.insert(cuts, hole)
5562	local angBoxes = {}
5563	do
5564	local edgeDir = 1rightV + 0upV
5565	local edgePerp = 0rightV + 1upV
5566	local cut = Instance.new("Part")
5567	cut.Size = Vector3.new(37.36, 1, 37.36)
5568	cut.CFrame = CFrame.fromMatrix(pos + -1 * 18.68 * edgePerp, edgeDir, normalV)
5569	cut.BrickColor = BrickColor.new("Bright orange")
5570	cut.Material = Enum.Material.Glacier
5571	cut.MaterialVariant = "2022 Stud"
5572	cut.Anchored = true; cut.Parent = workspace
5573	table.insert(angBoxes, cut)
5574	end
5575	do
5576	local edgeDir = -1rightV + 0upV
5577	local edgePerp = 0rightV + -1upV
5578	local cut = Instance.new("Part")
5579	cut.Size = Vector3.new(37.36, 1, 37.36)
5580	cut.CFrame = CFrame.fromMatrix(pos + 1 * 18.68 * edgePerp, edgeDir, normalV)
5581	cut.BrickColor = BrickColor.new("Bright orange")
5582	cut.Material = Enum.Material.Glacier
5583	cut.MaterialVariant = "2022 Stud"
5584	cut.Anchored = true; cut.Parent = workspace
5585	table.insert(angBoxes, cut)
5586	end
5587	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
5588	if #cuts > 0 then
5589	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
5590	for _, c in ipairs(cuts) do c:Destroy() end
5591	if ok and result then
5592	cyl:Destroy()
5593	result.Name = "Coil_6_5_A"; result.Anchored = true; result.Parent = model
5594	else
5595	cyl.Name = "Coil_6_5_A"; cyl.Parent = model
5596	end
5597	else
5598	cyl.Name = "Coil_6_5_A"; cyl.Parent = model
5599	end
5600	end
5601	do
5602	local rightV = Vector3.new(1,0,0).Unit
5603	local upV = (Vector3.new(0,0,-1) - Vector3.new(0,0,-1):Dot(rightV)*rightV).Unit
5604	local normalV = upV:Cross(rightV)
5605	local pos = Vector3.new(0, 2.62, 0)
5606	local cyl = Instance.new("Part")
5607	cyl.Shape = Enum.PartType.Cylinder
5608	cyl.Size = Vector3.new(0.8, 18.68, 18.68)
5609	cyl.CFrame = CFrame.fromMatrix(pos, normalV, rightV)
5610	cyl.BrickColor = BrickColor.new("Bright orange")
5611	cyl.Material = Enum.Material.Glacier
5612	cyl.MaterialVariant = "2022 Stud"
5613	cyl.Anchored = true; cyl.Parent = workspace
5614	local cuts = {}
5615	local hole = Instance.new("Part")
5616	hole.Shape = Enum.PartType.Cylinder
5617	hole.Size = Vector3.new(1, 17.08, 17.08)
5618	hole.CFrame = cyl.CFrame
5619	hole.BrickColor = BrickColor.new("Bright orange")
5620	hole.Material = Enum.Material.Glacier
5621	hole.MaterialVariant = "2022 Stud"
5622	hole.Anchored = true; hole.Parent = workspace
5623	table.insert(cuts, hole)
5624	local angBoxes = {}
5625	do
5626	local edgeDir = -1rightV + 0upV
5627	local edgePerp = 0rightV + -1upV
5628	local cut = Instance.new("Part")
5629	cut.Size = Vector3.new(37.36, 1, 37.36)
5630	cut.CFrame = CFrame.fromMatrix(pos + -1 * 18.68 * edgePerp, edgeDir, normalV)
5631	cut.BrickColor = BrickColor.new("Bright orange")
5632	cut.Material = Enum.Material.Glacier
5633	cut.MaterialVariant = "2022 Stud"
5634	cut.Anchored = true; cut.Parent = workspace
5635	table.insert(angBoxes, cut)
5636	end
5637	do
5638	local edgeDir = 1rightV + 0upV
5639	local edgePerp = 0rightV + 1upV
5640	local cut = Instance.new("Part")
5641	cut.Size = Vector3.new(37.36, 1, 37.36)
5642	cut.CFrame = CFrame.fromMatrix(pos + 1 * 18.68 * edgePerp, edgeDir, normalV)
5643	cut.BrickColor = BrickColor.new("Bright orange")
5644	cut.Material = Enum.Material.Glacier
5645	cut.MaterialVariant = "2022 Stud"
5646	cut.Anchored = true; cut.Parent = workspace
5647	table.insert(angBoxes, cut)
5648	end
5649	for _, b in ipairs(angBoxes) do table.insert(cuts, b) end
5650	if #cuts > 0 then
5651	local ok, result = pcall(function() return cyl:SubtractAsync(cuts) end)
5652	for _, c in ipairs(cuts) do c:Destroy() end
5653	if ok and result then
5654	cyl:Destroy()
5655	result.Name = "Coil_6_5_B"; result.Anchored = true; result.Parent = model
5656	else
5657	cyl.Name = "Coil_6_5_B"; cyl.Parent = model
5658	end
5659	else
5660	cyl.Name = "Coil_6_5_B"; cyl.Parent = model
5661	end
5662	end
5663	model.PrimaryPart = model:FindFirstChild("Coil_0_0_A")
5664	print("ExtensionCord built: " .. #model:GetChildren() .. " parts")

Comments

Loading comments...